Re: LibPATA/ATA Errors Continue - Will there be a fix for this?

[Justin Piszcz <jpiszcz@lucidpixels.com>]

On Tue, 20 Jun 2006, David Greaves wrote:

> Justin Piszcz wrote:
> > Dave, what is the make/model of the drives you get errors with by the
> > way?
> >
> > On Tue, 20 Jun 2006, David Greaves wrote:
> > > [Some email archaeology later]
> > >
> > > Back in March I was running 2.6.16 (with the opcode patch) and I sent an
> > > email with the following info:
> > >
> > > dmesg:
> > > ata1: translated op=0x28 cmd=0x25 ATA stat/err 0x51/04 to SCSI
> > > SK/ASC/ASCQ 0xb/00/00
> > > ata1: status=0x51 { DriveReady SeekComplete Error }
> > > ata1: error=0x04 { DriveStatusError }
> Model Family: Maxtor DiamondMax 10 family
> Device Model: Maxtor 6B200M0
> Serial Number: B4038RRH
> Firmware Version: BANC1980
>
> this is sata_sil
>
> Another machine has :
> Device Model: SAMSUNG SP2504C
> Serial Number: S09QJ10Y720963
> Firmware Version: VT100-33
> User Capacity: 250,059,350,016 bytes
>
> running through sata_via
>
> that's running 2.6.16.18 and just gives:
> ata1: PIO error
> ata1: status=0x50 { DriveReady SeekComplete }
>
>
> David
>
> --
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

What model SiL? Perhaps the kernel folk could ignore that error on our 
chipset.

0000:02:03.0 RAID bus controller: Silicon Image, Inc. SiI 3112 
[SATALink/SATARaid] Serial ATA Controller (rev 02)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/