NB: bart/ide-2.6.git seems to be unmaintained, so I'm sending this directly to -mm
I have a CF card which identifies itself as model=TRANSCEND rev=200508011
The card id labeled as TS512MCF80
hdparm -i /dev/hdci reports:
...
DMA modes: mdma0 mdma1 *mdma2
IDE controller:
IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
but if dma is turned on i get a lot of errors::
hdc: dma_timer_epiry: dma_status == 0x21
hdc: DMA timeout error
hdc: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
...
So blacklist this CF model.
Signed-off-by: Kirill Smelkov <[email protected]>
Index: linux-2.6.17/drivers/ide/ide-dma.c
===================================================================
--- linux-2.6.17.orig/drivers/ide/ide-dma.c 2006-06-18 05:49:35.000000000 +0400
+++ linux-2.6.17/drivers/ide/ide-dma.c 2006-06-20 11:37:30.000000000 +0400
@@ -129,6 +129,7 @@
{ "SanDisk SDP3B-64" , "ALL" },
{ "ATAPI CD-ROM DRIVE 40X MAXIMUM", "ALL" },
{ "_NEC DV5800A", "ALL" },
+ { "TRANSCEND" , "20050811" },
{ NULL , NULL }
};
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]