Hi,
I am using sata_mv driver as exists in kernel 2.6.13,
reached to a stage where after detecting the disk,
control gets struck. Any ideas?
I see this driver is modified a lot in latest kernel
version. Will it help to patch with latest changes.
Apreciate your help.
Here is the log:
........
........
RAMDISK driver initialized: 1 RAM disks of 500000K
size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version
6.0.60-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
PCI: Enabling device 0000:00:0e.0 (0000 -> 0003)
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network
Connection
PCI: Enabling device 0000:00:0e.1 (0000 -> 0003)
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network
Connection
Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
PCI: Enabling device 0000:00:0d.0 (0000 -> 0003)
ata1: SATA max PIO4 cmd 0x0 ctl 0x90011B0008022120
bmdma 0x0 irq 45
ata2: SATA max PIO4 cmd 0x0 ctl 0x90011B0008024120
bmdma 0x0 irq 45
ata3: SATA max PIO4 cmd 0x0 ctl 0x90011B0008026120
bmdma 0x0 irq 45
ata4: SATA max PIO4 cmd 0x0 ctl 0x90011B0008028120
bmdma 0x0 irq 45
ata1: no device found (phy stat 00000000)
scsi0 : sata_mv
ata2: no device found (phy stat 00000000)
scsi1 : sata_mv
ata3: dev 0 ATA, max UDMA/100, 156301488 sectors:
lba48
........
.......
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]