From: Heiko Carstens <[email protected]>
[S390] head.S code moving.
There is almost no room left for any new code between 0x10000
and 0x10480. Move the code from 0x10000 to 0x11000.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
---
arch/s390/kernel/head.S | 22 ++++++------
arch/s390/kernel/head31.S | 77 ++++++++++++++++++++++----------------------
arch/s390/kernel/head64.S | 79 ++++++++++++++++++++++------------------------
3 files changed, 88 insertions(+), 90 deletions(-)
diff -urpN linux-2.6/arch/s390/kernel/head31.S linux-2.6-patched/arch/s390/kernel/head31.S
--- linux-2.6/arch/s390/kernel/head31.S 2006-06-14 14:29:35.000000000 +0200
+++ linux-2.6-patched/arch/s390/kernel/head31.S 2006-06-14 14:29:53.000000000 +0200
@@ -1,7 +1,7 @@
/*
* arch/s390/kernel/head31.S
*
- * (C) Copyright IBM Corp. 2005
+ * Copyright (C) IBM Corp. 2005,2006
*
* Author(s): Hartmut Penner <[email protected]>
* Martin Schwidefsky <[email protected]>
@@ -16,12 +16,31 @@
# or linload or SALIPL
#
.org 0x10000
-startup:basr %r13,0 # get base
-.LPG1: l %r1, .Lget_ipl_device_addr-.LPG1(%r13)
- basr %r14, %r1
+startup:basr %r13,0 # get base
+.LPG0: l %r13,0f-.LPG0(%r13)
+ b 0(%r13)
+0: .long startup_continue
+
+#
+# params at 10400 (setup.h)
+#
+ .org PARMAREA
+ .long 0,0 # IPL_DEVICE
+ .long 0,RAMDISK_ORIGIN # INITRD_START
+ .long 0,RAMDISK_SIZE # INITRD_SIZE
+
+ .org COMMAND_LINE
+ .byte "root=/dev/ram0 ro"
+ .byte 0
+
+ .org 0x11000
+
+startup_continue:
+ basr %r13,0 # get base
+.LPG1: GET_IPL_DEVICE
lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
- la %r12,_pstart-.LPG1(%r13) # pointer to parameter area
- # move IPL device to lowcore
+ l %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
+ # move IPL device to lowcore
mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12)
#
@@ -51,8 +70,8 @@ startup:basr %r13,0 # get base
a %r1,__LC_EXT_NEW_PSW+4 # set handler
st %r1,__LC_EXT_NEW_PSW+4
- la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff
- la %r1, .Lsccb-PARMAREA(%r4) # our sccb
+ l %r4,.Lsccbaddr-.LPG1(%r13) # %r4 is our index for sccb stuff
+ lr %r1,%r4 # our sccb
.insn rre,0xb2200000,%r2,%r1 # service call
ipm %r1
srl %r1,28 # get cc code
@@ -63,7 +82,7 @@ startup:basr %r13,0 # get base
be .Lservicecall-.LPG1(%r13)
lpsw .Lwaitsclp-.LPG1(%r13)
.Lsclph:
- lh %r1,.Lsccbr-PARMAREA(%r4)
+ lh %r1,.Lsccbr-.Lsccb(%r4)
chi %r1,0x10 # 0x0010 is the sucess code
je .Lprocsccb # let's process the sccb
chi %r1,0x1f0
@@ -74,7 +93,7 @@ startup:basr %r13,0 # get base
b .Lservicecall-.LPG1(%r13)
.Lprocsccb:
lhi %r1,0
- icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
+ icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0
jnz .Lscnd
lhi %r1,0x800 # otherwise report 2GB
.Lscnd:
@@ -84,10 +103,10 @@ startup:basr %r13,0 # get base
lr %r1,%r3
.Lno2gb:
xr %r3,%r3 # same logic
- ic %r3,.Lscpa1-PARMAREA(%r4)
+ ic %r3,.Lscpa1-.Lsccb(%r4)
chi %r3,0x00
jne .Lcompmem
- l %r3,.Lscpa2-PARMAREA(%r4)
+ l %r3,.Lscpa2-.Lsccb(%r4)
.Lcompmem:
mr %r2,%r1 # mem in MB on 128-bit
l %r1,.Lonemb-.LPG1(%r13)
@@ -95,8 +114,6 @@ startup:basr %r13,0 # get base
b .Lfchunk-.LPG1(%r13)
.align 4
-.Lget_ipl_device_addr:
- .long .Lget_ipl_device
.Lpmask:
.byte 0
.align 8
@@ -242,6 +259,8 @@ startup:basr %r13,0 # get base
.long 0 # cr13: home space segment table
.long 0xc0000000 # cr14: machine check handling off
.long 0 # cr15: linkage stack operations
+.Lduct: .long 0,0,0,0,0,0,0,0
+ .long 0,0,0,0,0,0,0,0
.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem
.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu
.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp
@@ -252,25 +271,9 @@ startup:basr %r13,0 # get base
.Lmflags:.long machine_flags
.Lbss_bgn: .long __bss_start
.Lbss_end: .long _end
-
- .org PARMAREA-64
-.Lduct: .long 0,0,0,0,0,0,0,0
- .long 0,0,0,0,0,0,0,0
-
-#
-# params at 10400 (setup.h)
-#
- .org PARMAREA
- .global _pstart
-_pstart:
- .long 0,0 # IPL_DEVICE
- .long 0,RAMDISK_ORIGIN # INITRD_START
- .long 0,RAMDISK_SIZE # INITRD_SIZE
-
- .org COMMAND_LINE
- .byte "root=/dev/ram0 ro"
- .byte 0
- .org 0x11000
+.Lparmaddr: .long PARMAREA
+.Lsccbaddr: .long .Lsccb
+ .align 4096
.Lsccb:
.hword 0x1000 # length, one page
.byte 0x00,0x00,0x00
@@ -287,18 +290,14 @@ _pstart:
.Lscpincr2:
.quad 0x00
.fill 3984,1,0
- .org 0x12000
- .global _pend
-_pend:
-
- GET_IPL_DEVICE
+ .align 4096
#ifdef CONFIG_SHARED_KERNEL
.org 0x100000
#endif
#
-# startup-code, running in virtual mode
+# startup-code, running in absolute addressing mode
#
.globl _stext
_stext: basr %r13,0 # get base
diff -urpN linux-2.6/arch/s390/kernel/head64.S linux-2.6-patched/arch/s390/kernel/head64.S
--- linux-2.6/arch/s390/kernel/head64.S 2006-06-14 14:29:35.000000000 +0200
+++ linux-2.6-patched/arch/s390/kernel/head64.S 2006-06-14 14:29:53.000000000 +0200
@@ -1,7 +1,7 @@
/*
* arch/s390/kernel/head64.S
*
- * (C) Copyright IBM Corp. 1999,2005
+ * Copyright (C) IBM Corp. 1999,2006
*
* Author(s): Hartmut Penner <[email protected]>
* Martin Schwidefsky <[email protected]>
@@ -15,18 +15,37 @@
# this is called either by the ipl loader or directly by PSW restart
# or linload or SALIPL
#
- .org 0x10000
-startup:basr %r13,0 # get base
+ .org 0x10000
+startup:basr %r13,0 # get base
+.LPG0: l %r13,0f-.LPG0(%r13)
+ b 0(%r13)
+0: .long startup_continue
+
+#
+# params at 10400 (setup.h)
+#
+ .org PARMAREA
+ .quad 0 # IPL_DEVICE
+ .quad RAMDISK_ORIGIN # INITRD_START
+ .quad RAMDISK_SIZE # INITRD_SIZE
+
+ .org COMMAND_LINE
+ .byte "root=/dev/ram0 ro"
+ .byte 0
+
+ .org 0x11000
+
+startup_continue:
+ basr %r13,0 # get base
.LPG1: sll %r13,1 # remove high order bit
srl %r13,1
- l %r1,.Lget_ipl_device_addr-.LPG1(%r13)
- basr %r14,%r1
+ GET_IPL_DEVICE
lhi %r1,1 # mode 1 = esame
slr %r0,%r0 # set cpuid to zero
sigp %r1,%r0,0x12 # switch to esame mode
sam64 # switch to 64 bit mode
lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
- larl %r12,_pstart # pointer to parameter area
+ lg %r12,.Lparmaddr-.LPG1(%r13)# pointer to parameter area
# move IPL device to lowcore
mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12)
@@ -55,8 +74,8 @@ startup:basr %r13,0
larl %r1,.Lsclph
stg %r1,__LC_EXT_NEW_PSW+8 # set handler
- larl %r4,_pstart # %r4 is our index for sccb stuff
- la %r1,.Lsccb-PARMAREA(%r4) # our sccb
+ larl %r4,.Lsccb # %r4 is our index for sccb stuff
+ lgr %r1,%r4 # our sccb
.insn rre,0xb2200000,%r2,%r1 # service call
ipm %r1
srl %r1,28 # get cc code
@@ -67,7 +86,7 @@ startup:basr %r13,0
be .Lservicecall-.LPG1(%r13)
lpswe .Lwaitsclp-.LPG1(%r13)
.Lsclph:
- lh %r1,.Lsccbr-PARMAREA(%r4)
+ lh %r1,.Lsccbr-.Lsccb(%r4)
chi %r1,0x10 # 0x0010 is the sucess code
je .Lprocsccb # let's process the sccb
chi %r1,0x1f0
@@ -78,15 +97,15 @@ startup:basr %r13,0
b .Lservicecall-.LPG1(%r13)
.Lprocsccb:
lghi %r1,0
- icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
+ icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0
jnz .Lscnd
- lg %r1,.Lscpincr2-PARMAREA(%r4) # otherwise use this one
+ lg %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one
.Lscnd:
xr %r3,%r3 # same logic
- ic %r3,.Lscpa1-PARMAREA(%r4)
+ ic %r3,.Lscpa1-.Lsccb(%r4)
chi %r3,0x00
jne .Lcompmem
- l %r3,.Lscpa2-PARMAREA(%r4)
+ l %r3,.Lscpa2-.Lsccb(%r4)
.Lcompmem:
mlgr %r2,%r1 # mem in MB on 128-bit
l %r1,.Lonemb-.LPG1(%r13)
@@ -94,8 +113,6 @@ startup:basr %r13,0
b .Lfchunk-.LPG1(%r13)
.align 4
-.Lget_ipl_device_addr:
- .long .Lget_ipl_device
.Lpmask:
.byte 0
.align 8
@@ -242,29 +259,16 @@ startup:basr %r13,0
.quad 0 # cr13: home space segment table
.quad 0xc0000000 # cr14: machine check handling off
.quad 0 # cr15: linkage stack operations
+.Lduct: .long 0,0,0,0,0,0,0,0
+ .long 0,0,0,0,0,0,0,0
.Lpcmsk:.quad 0x0000000180000000
.L4malign:.quad 0xffffffffffc00000
.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8
.Lnop: .long 0x07000700
+.Lparmaddr:
+ .quad PARMAREA
- .org PARMAREA-64
-.Lduct: .long 0,0,0,0,0,0,0,0
- .long 0,0,0,0,0,0,0,0
-
-#
-# params at 10400 (setup.h)
-#
- .org PARMAREA
- .global _pstart
-_pstart:
- .quad 0 # IPL_DEVICE
- .quad RAMDISK_ORIGIN # INITRD_START
- .quad RAMDISK_SIZE # INITRD_SIZE
-
- .org COMMAND_LINE
- .byte "root=/dev/ram0 ro"
- .byte 0
- .org 0x11000
+ .align 4096
.Lsccb:
.hword 0x1000 # length, one page
.byte 0x00,0x00,0x00
@@ -281,18 +285,14 @@ _pstart:
.Lscpincr2:
.quad 0x00
.fill 3984,1,0
- .org 0x12000
- .global _pend
-_pend:
-
- GET_IPL_DEVICE
+ .align 4096
#ifdef CONFIG_SHARED_KERNEL
.org 0x100000
#endif
#
-# startup-code, running in virtual mode
+# startup-code, running in absolute addressing mode
#
.globl _stext
_stext: basr %r13,0 # get base
@@ -326,4 +326,3 @@ _stext: basr %r13,0
.align 8
.Ldw: .quad 0x0002000180000000,0x0000000000000000
.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-
diff -urpN linux-2.6/arch/s390/kernel/head.S linux-2.6-patched/arch/s390/kernel/head.S
--- linux-2.6/arch/s390/kernel/head.S 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6-patched/arch/s390/kernel/head.S 2006-06-14 14:29:53.000000000 +0200
@@ -1,7 +1,7 @@
/*
* arch/s390/kernel/head.S
*
- * (C) Copyright IBM Corp. 1999, 2005
+ * Copyright (C) IBM Corp. 1999,2006
*
* Author(s): Hartmut Penner <[email protected]>
* Martin Schwidefsky <[email protected]>
@@ -482,24 +482,23 @@ start:
.macro GET_IPL_DEVICE
.Lget_ipl_device:
- basr %r12,0
-.LGID: l %r1,0xb8 # get sid
+ l %r1,0xb8 # get sid
sll %r1,15 # test if subchannel is enabled
srl %r1,31
ltr %r1,%r1
- bz 0(%r14) # subchannel disabled
+ bz 2f-.LPG1(%r13) # subchannel disabled
l %r1,0xb8
- la %r5,.Lipl_schib-.LGID(%r12)
+ la %r5,.Lipl_schib-.LPG1(%r13)
stsch 0(%r5) # get schib of subchannel
- bnz 0(%r14) # schib not available
+ bnz 2f-.LPG1(%r13) # schib not available
tm 5(%r5),0x01 # devno valid?
- bno 0(%r14)
- la %r6,ipl_parameter_flags-.LGID(%r12)
+ bno 2f-.LPG1(%r13)
+ la %r6,ipl_parameter_flags-.LPG1(%r13)
oi 3(%r6),0x01 # set flag
- la %r2,ipl_devno-.LGID(%r12)
+ la %r2,ipl_devno-.LPG1(%r13)
mvc 0(2,%r2),6(%r5) # store devno
tm 4(%r5),0x80 # qdio capable device?
- bno 0(%r14)
+ bno 2f-.LPG1(%r13)
oi 3(%r6),0x02 # set flag
# copy ipl parameters
@@ -523,7 +522,7 @@ start:
ar %r2,%r1
sr %r0,%r4
jne 1b
- b 0(%r14)
+ b 2f-.LPG1(%r13)
.align 4
.Lipl_schib:
@@ -537,6 +536,7 @@ ipl_parameter_flags:
.globl ipl_devno
ipl_devno:
.word 0
+2:
.endm
#ifdef CONFIG_64BIT
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
