The Linux traffic's control engine inaccurately calculates transmission times for packets sent over ADSL links. For some packet sizes the error rises to over 50%. This occurs because ADSL uses ATM as its link layer transport, and ATM transmits packets in fixed sized 53 byte cells. This changes the userspace tool iproute2/tc by adding an option to calculate traffic transmission times (rate table) over all ATM links, including ADSL, with perfect accuracy. A longer presentation of the patch, its rational, what it does and how to use it can be found here: http://www.stuart.id.au/russell/files/tc/tc-atm/ A earlier version of the patch, and a _detailed_ empirical investigation of its effects can be found here: http://www.adsl-optimizer.dk/ Signed-off-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Russell Stuart <[email protected]> --- diff -Nurp iproute2.orig/include/linux/pkt_sched.h iproute2/include/linux/pkt_sched.h --- iproute2.orig/include/linux/pkt_sched.h 2005-12-10 09:27:44.000000000 +1000 +++ iproute2/include/linux/pkt_sched.h 2006-06-13 11:53:27.000000000 +1000 @@ -77,8 +77,9 @@ struct tc_ratespec { unsigned char cell_log; unsigned char __reserved; - unsigned short feature; - short addend; + unsigned short feature; /* Always 0 in pre-atm patch kernels */ + char cell_align; /* Always 0 in pre-atm patch kernels */ + unsigned char __unused; unsigned short mpu; __u32 rate; }; diff -Nurp iproute2.orig/tc/m_police.c iproute2/tc/m_police.c --- iproute2.orig/tc/m_police.c 2005-01-19 08:11:58.000000000 +1000 +++ iproute2/tc/m_police.c 2006-06-13 11:53:27.000000000 +1000 @@ -35,7 +35,7 @@ struct action_util police_action_util = static void explain(void) { fprintf(stderr, "Usage: ... police rate BPS burst BYTES[/BYTES] [ mtu BYTES[/BYTES] ]\n"); - fprintf(stderr, " [ peakrate BPS ] [ avrate BPS ]\n"); + fprintf(stderr, " [ peakrate BPS ] [ avrate BPS ] [ overhead OVERHEAD ] [ atm ]\n"); fprintf(stderr, " [ ACTIONTERM ]\n"); fprintf(stderr, "Old Syntax ACTIONTERM := action <EXCEEDACT>[/NOTEXCEEDACT] \n"); fprintf(stderr, "New Syntax ACTIONTERM := conform-exceed <EXCEEDACT>[/NOTEXCEEDACT] \n"); @@ -134,7 +134,10 @@ int act_parse_police(struct action_util __u32 ptab[256]; __u32 avrate = 0; int presult = 0; - unsigned buffer=0, mtu=0, mpu=0; + unsigned buffer=0, mtu=0; + __u8 mpu=0; + __s8 overhead=0; + int atm=0; int Rcell_log=-1, Pcell_log = -1; struct rtattr *tail; @@ -184,7 +187,7 @@ int act_parse_police(struct action_util fprintf(stderr, "Double \"mpu\" spec\n"); return -1; } - if (get_size(&mpu, *argv)) { + if (get_u8(&mpu, *argv, 10)) { explain1("mpu"); return -1; } @@ -198,6 +201,18 @@ int act_parse_police(struct action_util explain1("rate"); return -1; } + } else if (strcmp(*argv, "overhead") == 0) { + NEXT_ARG(); + if (p.rate.rate) { + fprintf(stderr, "Double \"overhead\" spec\n"); + return -1; + } + if (get_s8(&overhead, *argv, 10)) { + explain1("overhead"); + return -1; + } + } else if (strcmp(*argv, "atm") == 0) { + atm = 1; } else if (strcmp(*argv, "avrate") == 0) { NEXT_ARG(); if (avrate) { @@ -264,22 +279,12 @@ int act_parse_police(struct action_util } if (p.rate.rate) { - if ((Rcell_log = tc_calc_rtable(p.rate.rate, rtab, Rcell_log, mtu, mpu)) < 0) { - fprintf(stderr, "TBF: failed to calculate rate table.\n"); - return -1; - } + tc_calc_ratespec(&p.rate, rtab, p.rate.rate, Rcell_log, mtu, mpu, atm, overhead); p.burst = tc_calc_xmittime(p.rate.rate, buffer); - p.rate.cell_log = Rcell_log; - p.rate.mpu = mpu; } p.mtu = mtu; if (p.peakrate.rate) { - if ((Pcell_log = tc_calc_rtable(p.peakrate.rate, ptab, Pcell_log, mtu, mpu)) < 0) { - fprintf(stderr, "POLICE: failed to calculate peak rate table.\n"); - return -1; - } - p.peakrate.cell_log = Pcell_log; - p.peakrate.mpu = mpu; + tc_calc_ratespec(&p.peakrate, ptab, p.peakrate.rate, Pcell_log, mtu, mpu, atm, overhead); } tail = NLMSG_TAIL(n); diff -Nurp iproute2.orig/tc/q_cbq.c iproute2/tc/q_cbq.c --- iproute2.orig/tc/q_cbq.c 2005-07-06 08:37:15.000000000 +1000 +++ iproute2/tc/q_cbq.c 2006-06-13 11:53:27.000000000 +1000 @@ -32,6 +32,7 @@ static void explain_class(void) fprintf(stderr, " [ prio NUMBER ] [ cell BYTES ] [ ewma LOG ]\n"); fprintf(stderr, " [ estimator INTERVAL TIME_CONSTANT ]\n"); fprintf(stderr, " [ split CLASSID ] [ defmap MASK/CHANGE ]\n"); + fprintf(stderr, " [ overhead BYTES ] [ atm ]\n"); } static void explain(void) @@ -52,7 +53,10 @@ static int cbq_parse_opt(struct qdisc_ut struct tc_ratespec r; struct tc_cbq_lssopt lss; __u32 rtab[256]; - unsigned mpu=0, avpkt=0, allot=0; + unsigned avpkt=0, allot=0; + __u8 mpu=0; + __s8 overhead=0; + int atm=0; int cell_log=-1; int ewma_log=-1; struct rtattr *tail; @@ -102,7 +106,7 @@ static int cbq_parse_opt(struct qdisc_ut } } else if (strcmp(*argv, "mpu") == 0) { NEXT_ARG(); - if (get_size(&mpu, *argv)) { + if (get_u8(&mpu, *argv, 10)) { explain1("mpu"); return -1; } @@ -113,6 +117,14 @@ static int cbq_parse_opt(struct qdisc_ut explain1("allot"); return -1; } + } else if (strcmp(*argv, "overhead") == 0) { + NEXT_ARG(); + if (get_s8(&overhead, *argv, 10)) { + explain1("overhead"); + return -1; + } + } else if (strcmp(*argv, "atm") == 0) { + atm = 1; } else if (strcmp(*argv, "help") == 0) { explain(); return -1; @@ -137,12 +149,7 @@ static int cbq_parse_opt(struct qdisc_ut if (allot < (avpkt*3)/2) allot = (avpkt*3)/2; - if ((cell_log = tc_calc_rtable(r.rate, rtab, cell_log, allot, mpu)) < 0) { - fprintf(stderr, "CBQ: failed to calculate rate table.\n"); - return -1; - } - r.cell_log = cell_log; - r.mpu = mpu; + tc_calc_ratespec(&r, rtab, r.rate, cell_log, allot, mpu, atm, overhead); if (ewma_log < 0) ewma_log = TC_CBQ_DEF_EWMA; @@ -175,7 +182,9 @@ static int cbq_parse_class_opt(struct qd struct tc_cbq_fopt fopt; struct tc_cbq_ovl ovl; __u32 rtab[256]; - unsigned mpu=0; + __u8 mpu=0; + __s8 overhead = 0; + int atm = 0; int cell_log=-1; int ewma_log=-1; unsigned bndw = 0; @@ -289,10 +298,18 @@ static int cbq_parse_class_opt(struct qd lss.change |= TCF_CBQ_LSS_AVPKT; } else if (strcmp(*argv, "mpu") == 0) { NEXT_ARG(); - if (get_size(&mpu, *argv)) { + if (get_u8(&mpu, *argv, 10)) { explain1("mpu"); return -1; } + } else if (strcmp(*argv, "overhead") == 0) { + NEXT_ARG(); + if (get_s8(&overhead, *argv, 10)) { + explain1("overhead"); + return -1; + } + } else if (strcmp(*argv, "atm") == 0) { + atm = 1; } else if (strcmp(*argv, "weight") == 0) { NEXT_ARG(); if (get_size(&wrr.weight, *argv)) { @@ -336,12 +353,7 @@ static int cbq_parse_class_opt(struct qd unsigned pktsize = wrr.allot; if (wrr.allot < (lss.avpkt*3)/2) wrr.allot = (lss.avpkt*3)/2; - if ((cell_log = tc_calc_rtable(r.rate, rtab, cell_log, pktsize, mpu)) < 0) { - fprintf(stderr, "CBQ: failed to calculate rate table.\n"); - return -1; - } - r.cell_log = cell_log; - r.mpu = mpu; + tc_calc_ratespec(&r, rtab, r.rate, cell_log, pktsize, mpu, atm, overhead); } if (ewma_log < 0) ewma_log = TC_CBQ_DEF_EWMA; @@ -463,8 +475,12 @@ static int cbq_print_opt(struct qdisc_ut fprintf(f, "rate %s ", buf); if (show_details) { fprintf(f, "cell %ub ", 1<<r->cell_log); - if (r->mpu) - fprintf(f, "mpu %ub ", r->mpu); + if (r->mpu & 0xff) + fprintf(f, "mpu %ub ", (__u8)r->mpu); + if ((r->mpu >> 8)) + fprintf(f, "overhead %db ", (__s8)(r->mpu >> 8)); + if (r->feature & 0x0001) + fprintf(f, "atm "); } } if (lss && lss->flags) { diff -Nurp iproute2.orig/tc/q_htb.c iproute2/tc/q_htb.c --- iproute2.orig/tc/q_htb.c 2005-01-19 08:11:58.000000000 +1000 +++ iproute2/tc/q_htb.c 2006-06-13 11:53:27.000000000 +1000 @@ -34,14 +34,14 @@ static void explain(void) " default minor id of class to which unclassified packets are sent {0}\n" " r2q DRR quantums are computed as rate in Bps/r2q {10}\n" " debug string of 16 numbers each 0-3 {0}\n\n" - "... class add ... htb rate R1 [burst B1] [mpu B] [overhead O]\n" + "... class add ... htb rate R1 [burst B1] [mpu B] [overhead O] [atm]\n" " [prio P] [slot S] [pslot PS]\n" " [ceil R2] [cburst B2] [mtu MTU] [quantum Q]\n" " rate rate allocated to this class (class can still borrow)\n" " burst max bytes burst which can be accumulated during idle period {computed}\n" " mpu minimum packet size used in rate computations\n" " overhead per-packet size overhead used in rate computations\n" - + " atm include atm cell tax in rate computations\n" " ceil definite upper class rate (no borrows) {rate}\n" " cburst burst but for ceil {computed}\n" " mtu max packet size we create rate map for {1600}\n" @@ -107,8 +107,10 @@ static int htb_parse_class_opt(struct qd __u32 rtab[256],ctab[256]; unsigned buffer=0,cbuffer=0; int cell_log=-1,ccell_log = -1; - unsigned mtu, mpu; - unsigned char mpu8 = 0, overhead = 0; + unsigned mtu; + __u8 mpu8=0; + __s8 overhead=0; + int atm=0; struct rtattr *tail; memset(&opt, 0, sizeof(opt)); mtu = 1600; /* eth packet len */ @@ -132,9 +134,11 @@ static int htb_parse_class_opt(struct qd } } else if (matches(*argv, "overhead") == 0) { NEXT_ARG(); - if (get_u8(&overhead, *argv, 10)) { + if (get_s8(&overhead, *argv, 10)) { explain1("overhead"); return -1; } + } else if (matches(*argv, "atm") == 0) { + atm = 1; } else if (matches(*argv, "quantum") == 0) { NEXT_ARG(); if (get_u32(&opt.quantum, *argv, 10)) { @@ -206,23 +210,11 @@ static int htb_parse_class_opt(struct qd if (!buffer) buffer = opt.rate.rate / get_hz() + mtu; if (!cbuffer) cbuffer = opt.ceil.rate / get_hz() + mtu; -/* encode overhead and mpu, 8 bits each, into lower 16 bits */ - mpu = (unsigned)mpu8 | (unsigned)overhead << 8; - opt.ceil.mpu = mpu; opt.rate.mpu = mpu; - - if ((cell_log = tc_calc_rtable(opt.rate.rate, rtab, cell_log, mtu, mpu)) < 0) { - fprintf(stderr, "htb: failed to calculate rate table.\n"); - return -1; - } + /* encode overhead and mpu, 8 bits each, into lower 16 bits */ + tc_calc_ratespec(&opt.rate, rtab, opt.rate.rate, cell_log, mtu, mpu8, atm, overhead); + tc_calc_ratespec(&opt.ceil, ctab, opt.ceil.rate, cell_log, mtu, mpu8, atm, overhead); opt.buffer = tc_calc_xmittime(opt.rate.rate, buffer); - opt.rate.cell_log = cell_log; - - if ((ccell_log = tc_calc_rtable(opt.ceil.rate, ctab, cell_log, mtu, mpu)) < 0) { - fprintf(stderr, "htb: failed to calculate ceil rate table.\n"); - return -1; - } opt.cbuffer = tc_calc_xmittime(opt.ceil.rate, cbuffer); - opt.ceil.cell_log = ccell_log; tail = NLMSG_TAIL(n); addattr_l(n, 1024, TCA_OPTIONS, NULL, 0); @@ -267,12 +259,16 @@ static int htb_print_opt(struct qdisc_ut sprint_size(buffer, b1), 1<<hopt->rate.cell_log, sprint_size(hopt->rate.mpu&0xFF, b2), - sprint_size((hopt->rate.mpu>>8)&0xFF, b3)); + sprint_size((__s8)(hopt->rate.mpu>>8), b3)); + if (hopt->rate.feature & 0x0001) + fprintf(f, "atm "); fprintf(f, "cburst %s/%u mpu %s overhead %s ", sprint_size(cbuffer, b1), 1<<hopt->ceil.cell_log, sprint_size(hopt->ceil.mpu&0xFF, b2), - sprint_size((hopt->ceil.mpu>>8)&0xFF, b3)); + sprint_size((__s8)(hopt->ceil.mpu>>8), b3)); + if (hopt->ceil.feature & 0x0001) + fprintf(f, "atm "); fprintf(f, "level %d ", (int)hopt->level); } else { fprintf(f, "burst %s ", sprint_size(buffer, b1)); diff -Nurp iproute2.orig/tc/q_tbf.c iproute2/tc/q_tbf.c --- iproute2.orig/tc/q_tbf.c 2005-01-19 08:11:58.000000000 +1000 +++ iproute2/tc/q_tbf.c 2006-06-13 11:53:27.000000000 +1000 @@ -26,7 +26,7 @@ static void explain(void) { fprintf(stderr, "Usage: ... tbf limit BYTES burst BYTES[/BYTES] rate KBPS [ mtu BYTES[/BYTES] ]\n"); - fprintf(stderr, " [ peakrate KBPS ] [ latency TIME ]\n"); + fprintf(stderr, " [ peakrate KBPS ] [ latency TIME ] [ overhead OVERHEAD ] [ atm ]\n"); } static void explain1(char *arg) @@ -43,7 +43,10 @@ static int tbf_parse_opt(struct qdisc_ut struct tc_tbf_qopt opt; __u32 rtab[256]; __u32 ptab[256]; - unsigned buffer=0, mtu=0, mpu=0, latency=0; + unsigned buffer=0, mtu=0, latency=0; + __u8 mpu=0; + __s8 overhead=0; + int atm=0; int Rcell_log=-1, Pcell_log = -1; struct rtattr *tail; @@ -103,7 +106,7 @@ static int tbf_parse_opt(struct qdisc_ut fprintf(stderr, "Double \"mpu\" spec\n"); return -1; } - if (get_size(&mpu, *argv)) { + if (get_u8(&mpu, *argv, 10)) { explain1("mpu"); return -1; } @@ -119,6 +122,20 @@ static int tbf_parse_opt(struct qdisc_ut return -1; } ok++; + } else if (strcmp(*argv, "overhead") == 0) { + NEXT_ARG(); + if (overhead) { + fprintf(stderr, "Double \"overhead\" spec\n"); + return -1; + } + if (get_s8(&overhead, *argv, 10)) { + explain1("overhead"); + return -1; + } + ok++; + } else if (strcmp(*argv, "atm") == 0) { + atm = 1; + ok++; } else if (matches(*argv, "peakrate") == 0) { NEXT_ARG(); if (opt.peakrate.rate) { @@ -170,21 +187,11 @@ static int tbf_parse_opt(struct qdisc_ut opt.limit = lim; } - if ((Rcell_log = tc_calc_rtable(opt.rate.rate, rtab, Rcell_log, mtu, mpu)) < 0) { - fprintf(stderr, "TBF: failed to calculate rate table.\n"); - return -1; - } + tc_calc_ratespec(&opt.rate, rtab, opt.rate.rate, Rcell_log, mtu, mpu, atm, overhead); opt.buffer = tc_calc_xmittime(opt.rate.rate, buffer); - opt.rate.cell_log = Rcell_log; - opt.rate.mpu = mpu; if (opt.peakrate.rate) { - if ((Pcell_log = tc_calc_rtable(opt.peakrate.rate, ptab, Pcell_log, mtu, mpu)) < 0) { - fprintf(stderr, "TBF: failed to calculate peak rate table.\n"); - return -1; - } + tc_calc_ratespec(&opt.peakrate, ptab, opt.peakrate.rate, Pcell_log, mtu, mpu, atm, overhead); opt.mtu = tc_calc_xmittime(opt.peakrate.rate, mtu); - opt.peakrate.cell_log = Pcell_log; - opt.peakrate.mpu = mpu; } tail = NLMSG_TAIL(n); @@ -220,8 +227,12 @@ static int tbf_print_opt(struct qdisc_ut fprintf(f, "rate %s ", sprint_rate(qopt->rate.rate, b1)); buffer = ((double)qopt->rate.rate*tc_core_tick2usec(qopt->buffer))/1000000; if (show_details) { - fprintf(f, "burst %s/%u mpu %s ", sprint_size(buffer, b1), - 1<<qopt->rate.cell_log, sprint_size(qopt->rate.mpu, b2)); + fprintf(f, "burst %s/%u mpu %s overhead %d ", sprint_size(buffer, b1), + 1<<qopt->rate.cell_log, + sprint_size(qopt->rate.mpu & 0xFF, b2), + (__s8)(qopt->rate.mpu >> 8)); + if (qopt->rate.feature & 0x0001) + fprintf(f, "atm "); } else { fprintf(f, "burst %s ", sprint_size(buffer, b1)); } @@ -232,8 +243,12 @@ static int tbf_print_opt(struct qdisc_ut if (qopt->mtu || qopt->peakrate.mpu) { mtu = ((double)qopt->peakrate.rate*tc_core_tick2usec(qopt->mtu))/1000000; if (show_details) { - fprintf(f, "mtu %s/%u mpu %s ", sprint_size(mtu, b1), - 1<<qopt->peakrate.cell_log, sprint_size(qopt->peakrate.mpu, b2)); + fprintf(f, "mtu %s/%u mpu %s overhead %d ", sprint_size(mtu, b1), + 1<<qopt->peakrate.cell_log, + sprint_size(qopt->peakrate.mpu & 0xFF, b2), + (__s8)(qopt->peakrate.mpu >> 8)); + if (qopt->peakrate.feature & 0x0001) + fprintf(f, "atm "); } else { fprintf(f, "minburst %s ", sprint_size(mtu, b1)); } diff -Nurp iproute2.orig/tc/tc_core.c iproute2/tc/tc_core.c --- iproute2.orig/tc/tc_core.c 2004-07-31 06:26:15.000000000 +1000 +++ iproute2/tc/tc_core.c 2006-06-13 11:53:27.000000000 +1000 @@ -23,6 +23,9 @@ #include "tc_core.h" +#define ATM_CELL_SIZE 53 +#define ATM_CELL_PAYLOAD 48 + static __u32 t2us=1; static __u32 us2t=1; static double tick_in_usec = 1; @@ -43,33 +46,124 @@ unsigned tc_calc_xmittime(unsigned rate, } /* - rtab[pkt_len>>cell_log] = pkt_xmit_time + * Calculate the ATM cell overhead. ATM sends each packet in 48 byte + * chunks, the last chunk being padded if necessary. Each chunk carries + * an additional 5 byte overhead - the ATM header. */ +static int tc_align_to_cells(int size) +{ + int cells; + + cells = size / ATM_CELL_PAYLOAD; + if (size % ATM_CELL_PAYLOAD != 0) + cells++; + return cells * ATM_CELL_SIZE; +} -int tc_calc_rtable(unsigned bps, __u32 *rtab, int cell_log, unsigned mtu, - unsigned mpu) +/* + * The number this function calculates is subtle. Ignore it and just believe + * it works if you have a choice, otherwise .. + * + * If there we are calculating the ATM cell overhead the kernel calculations + * will be out sometimes if the range of packet sizes spanned by one + * rate table element crosses an ATM cell boundary. Consider these three + * senarios: + * (a) the packet is sent across the ATM link without addition + * overheads the kernel doesn't know about, and + * (b) a packet that has 1 byte of additional overhead the kernel + * doesn't know about. Here + * (c) a packet that has 2 bytes of additional overhead the + * kernel doesn't know about. + * The table below presents what happens. Each row is for a single rate + * table element. The "Sizes" column shows what packet sizes the rate table + * element will be used for. This packet size includes the "unknown to + * kernel" overhead, but does not include overhead incurred by breaking the + * packet up into ATM cells. This ATM cell overhead consists of the 5 byte + * header per ATM cell, plus the padding in the last cell. The "ATM" column + * shows how many bytes are actually sent across the ATM link, ie it does + * include the ATM cell overhead. + * + * RateTable Entry Sizes(a) ATM(a) Sizes(b) ATM(b) Sizes(c) ATM(c) + * ratetable[0] 0..7 53 1..8 53 2..9 53 + * ratetable[1] 8..15 53 9..16 53 2..17 53 + * ratetable[2] 16..23 53 17..24 53 18..25 53 + * ratetable[3] 24..31 53 25..32 53 26..33 53 + * ratetable[4] 32..39 53 33..40 53 34..41 53 + * ratetable[5] 40..47 53 41..48 53 42..49 53,106 + * ratetable[6] 48..55 53,106 49..56 106 50..57 106 + * + * For senario (a), the ratetable[6] entry covers two cases: one were a single + * ATM cell is needed to transmit the data, and one where two ATM cells are + * required. It can't be right for both. Unfortunately the error is large. + * The same problem arises in senario (c) for ratetable[5]. The problem + * doesn't happen for senario (b), because the boundary between rate table + * entries happens to match the boundary between ATM cells. + * + * What we would like to do is ensure that ratetable boundaries always match + * the ATM cells. If we do this the error goes away. The solution is to make + * the kernel add a small bias to the packet size. (Small because the bias + * will always be smaller than cell_log.) Adding this small bias will in + * effect slide the ratetable along a bit, so the boundaries match. The code + * below calculates that bias. Provided the MTU is less than 4092, doing + * this can always eliminate the error. + * + * Old kernels won't add this bias, so they will have the error described above + * in most cases. In the worst case senario, considering all possible ATM cell + * sizes (1..48), for 7 of these sizes the old kernel will calculate the rate + * wrongly - ie, be out by 53 bytes. + */ +static int tc_calc_cell_align(int atm_cell_tax, char overhead, int cell_log) +{ + int cell_size; + + if (!atm_cell_tax) + return 0; + cell_size = 1 << cell_log; + return (overhead + cell_size - 2) % cell_size - cell_size + 1; +} + + +/* + * A constructor for a tc_ratespec. + */ +void tc_calc_ratespec(struct tc_ratespec* spec, __u32* rtab, unsigned bps, + int cell_log, unsigned mtu, unsigned char mpu, int atm_cell_tax, + char overhead) { int i; - unsigned overhead = (mpu >> 8) & 0xFF; - mpu = mpu & 0xFF; if (mtu == 0) mtu = 2047; + /* rtab[pkt_len>>cell_log] = pkt_xmit_time */ if (cell_log < 0) { cell_log = 0; while ((mtu>>cell_log) > 255) cell_log++; } + for (i=0; i<256; i++) { - unsigned sz = (i<<cell_log); - if (overhead) - sz += overhead; + /* + * sz is the length of packet we will use for this ratetable + * entry. The time taken to send a packet of this length will + * be used for all packet lengths this ratetable entry applies + * to. As underestimating how long it will take to transmit a + * packet is a worse error than overestimating it, the longest + * packet this rate table entry applies to is used. + */ + int sz = ((i+1)<<cell_log) - 1 + overhead; if (sz < mpu) sz = mpu; - rtab[i] = tc_core_usec2tick(1000000*((double)sz/bps)); + if (atm_cell_tax) + sz = tc_align_to_cells(sz); + rtab[i] = tc_calc_xmittime(bps, sz); } - return cell_log; + + spec->cell_align = tc_calc_cell_align(atm_cell_tax, overhead, cell_log); + spec->cell_log = cell_log; + spec->feature = 0x8000 | (atm_cell_tax ? 1 : 0); + spec->mpu = mpu | (unsigned)(overhead << 8); + spec->rate = bps; } int tc_core_init() diff -Nurp iproute2.orig/tc/tc_core.h iproute2/tc/tc_core.h --- iproute2.orig/tc/tc_core.h 2005-03-15 05:02:41.000000000 +1000 +++ iproute2/tc/tc_core.h 2006-06-13 11:53:27.000000000 +1000 @@ -7,7 +7,9 @@ long tc_core_usec2tick(long usec); long tc_core_tick2usec(long tick); unsigned tc_calc_xmittime(unsigned rate, unsigned size); -int tc_calc_rtable(unsigned bps, __u32 *rtab, int cell_log, unsigned mtu, unsigned mpu); +void tc_calc_ratespec(struct tc_ratespec* spec, __u32* rtab, unsigned bps, + int cell_log, unsigned mtu, unsigned char mpu, int atm_cell_tax, + char overhead); int tc_setup_estimator(unsigned A, unsigned time_const, struct tc_estimator *est);
Attachment:
signature.asc
Description: This is a digitally signed message part
- Follow-Ups:
- Prev by Date: [PATCH 0/2] NET: Accurate packet scheduling for ATM/ADSL
- Next by Date: [PATCH 1/2] NET: Accurate packet scheduling for ATM/ADSL (kernel)
- Previous by thread: [PATCH 0/2] NET: Accurate packet scheduling for ATM/ADSL
- Next by thread: Re: [PATCH 2/2] NET: Accurate packet scheduling for ATM/ADSL (userspace)
- Index(es):
 |