On Thu, 08 Jun 2006 12:09:46 +0100 Barry Scott wrote:
> When I built 2.6.17-rc6 I see a lot of warnings after the MODPOST message
> about Section mismatch. What did I do wrong in building the kernel and
> modules?
Nothing (well, I would use "make all" instead of the last 2
commands and I would use ketchup or
http://www.xenotime.net/linux/scripts/grab-kernel-rc
to optionally download and create new kernel dirs. :)
I'll look at the warnings. Some of them are noise/bogus,
I expect...
> I used these commands to build 2.6.17-rc6 on FC4:
> $ tar xjf ~/Downloads/linux-2.6.16.tar.bz2
> $ mv linux-2.6.16 linux-2.6.17-rc6
> $ cd linux-2.6.17-rc6
> $ bzcat ~/Downloads/patch-2.6.17-rc6.bz2| patch -p1
> $ cp /boot/config-2.6.16-1.2096_FC4
> ~/KernelBuild/obj/linux-2.6.17-rc6/.config
> $ make O=~/KernelBuild/obj/linux-2.6.17-rc6 silentoldconfig
> (took the defaults for all new config items)
> $ make O=~/KernelBuild/obj/linux-2.6.17-rc6 >make-1.log 2>&1
> $ make O=~/KernelBuild/obj/linux-2.6.17-rc6 modules >make-2.log 2>&1
>
> Here are some of the warnings:
>
> MODPOST
> WARNING: drivers/input/misc/wistron_btns.o - Section mismatch: reference
> to .init.text:dmi_matched from .data between 'dmi_ids' (at offset 0x120)
> and 'keymap_aopen_1559as'
> ...
> WARNING: drivers/isdn/hisax/hisax.o - Section mismatch: reference to
> .init.text:setup_teles0 from .text between 'checkcard' (at offset
> 0x11a5) and 'hisax_register'
> ...
> WARNING: drivers/net/3c501.o - Section mismatch: reference to
> .init.text:el1_probe from .text between 'init_module' (at offset 0x146)
> and 'el_reset'
> WARNING: drivers/net/3c503.o - Section mismatch: reference to
> .init.data: from .text between 'init_module' (at offset 0x47c) and
> 'el2_block_output'
> WARNING: drivers/net/3c503.o - Section mismatch: reference to
> .init.data: from .text between 'init_module' (at offset 0x485) and
> 'el2_block_output'
> ...
> WARNING: drivers/net/wd.o - Section mismatch: reference to .init.text:
> from .text after 'init_module' (at offset 0x47d)
> WARNING: drivers/scsi/megaraid/megaraid_mbox.o - Section mismatch:
> reference to .init.text: from .text between 'megaraid_probe_one' (at
> offset 0x1f00) and 'megaraid_queue_command'
> WARNING: drivers/video/aty/atyfb.o - Section mismatch: reference to
> .init.data: from .text between 'atyfb_pci_probe' (at offset 0x297f) and
> 'atyfb_set_par'
> WARNING: drivers/video/aty/atyfb.o - Section mismatch: reference to
> .init.text:aty_init_cursor from .text between 'atyfb_pci_probe' (at
> offset 0x2dc1) and 'atyfb_set_par'
> WARNING: drivers/video/macmodes.o - Section mismatch: reference to
> .init.text:mac_find_mode from __ksymtab between
> '__ksymtab_mac_find_mode' (at offset 0x0) and
> '__ksymtab_mac_map_monitor_sense'
> WARNING: fs/jffs2/jffs2.o - Section mismatch: reference to
> .init.text:jffs2_zlib_init from .text between 'jffs2_compressors_init'
> (at offset 0x81) and 'jffs2_compressors_exit'
> WARNING: sound/isa/sb/snd-sbawe.o - Section mismatch: reference to
> .init.text:snd_emu8000_new from .text between 'snd_sb16_probe' (at
> offset 0x440) and 'snd_sb16_nonpnp_remove'
> WARNING: sound/isa/snd-opl3sa2.o - Section mismatch: reference to
> .init.text: from .text between 'snd_opl3sa2_pnp_cdetect' (at offset
> 0xe61) and 'snd_opl3sa2_pnp_detect'
> WARNING: sound/isa/snd-opl3sa2.o - Section mismatch: reference to
> .init.text: from .text between 'snd_opl3sa2_pnp_detect' (at offset
> 0xf52) and 'snd_opl3sa2_put_single'
---
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]