On Wed, 7 Jun 2006 17:11:06 -0600
Bjorn Helgaas <[email protected]> wrote:
> Something changed between 2.6.17-rc5-mm2 and -mm3 that broke tg3
> on my HP DL360:
>
> 2.6.17-rc5-mm2:
> tg3.c:v3.59 (May 26, 2006)
> ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 30 (level, low) -> IRQ 177
> eth0: Tigon3 [partno(N/A) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:0e:7f:b4:69:94
> eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
> eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
>
> 2.6.17-rc5-mm3 (with a bit of debug showing tg3_read_mem result):
> tg3.c:v3.59 (May 26, 2006)
> ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 30 (level, low) -> IRQ 177
> tg3_get_eeprom_hw_cfg:
> tg3_get_eeprom_hw_cfg: val 0xffffffff (magic 0x4b657654)
> tg3_phy_probe: after readphy, err -16 hw_phy_id 0x0
> tg3_phy_probe: phy_id 0xffffffff
> lookup_by_subsys: vendor 0xe11 dev 0xcb
> tg3: (0000:01:02.0) phy probe failed, err -19
> tg3: Problem fetching invariants of chip, aborting.
>
> The tg3 driver itself didn't change, so it must be some other PCI
> change or something. The only other PCI device I have (a Smart
> Array with cciss driver) works fine.
>
> I'll try to narrow down the problem tomorrow, but I'll post this in
> case it's obvious to somebody.
>
fwiw, tg3 on powermac g5 works OK with rc6-mm1.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
