This is 2.6.17-rc5-mm3 + the 3 ns83820 patches. I have no idea what I
did to cause this to happen (i.e. it claims that mv is the culprit,
but I don't think I was running mv myself -- I guess it was spawned by
another process, but I have *no* idea what would have done it). I'm
including the full dmesg.
--
-Barry K. Nathan <[email protected]>
[ 0.000000] Linux version 2.6.17-rc5-mm3 (barryn@nserv) (gcc
version 4.1.1) #1 Sun Jun 4 02:03:43 PDT 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size:
000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] add_memory_region(0000000000000000, 000000000009fc00, 1)
[ 0.000000] copy_e820_map() start: 000000000009fc00 size:
0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] add_memory_region(000000000009fc00, 0000000000000400, 2)
[ 0.000000] copy_e820_map() start: 00000000000f0000 size:
0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] add_memory_region(00000000000f0000, 0000000000010000, 2)
[ 0.000000] copy_e820_map() start: 0000000000100000 size:
000000001fef0000 end: 000000001fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] add_memory_region(0000000000100000, 000000001fef0000, 1)
[ 0.000000] copy_e820_map() start: 000000001fff0000 size:
0000000000008000 end: 000000001fff8000 type: 3
[ 0.000000] add_memory_region(000000001fff0000, 0000000000008000, 3)
[ 0.000000] copy_e820_map() start: 000000001fff8000 size:
0000000000008000 end: 0000000020000000 type: 4
[ 0.000000] add_memory_region(000000001fff8000, 0000000000008000, 4)
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size:
0000000000010000 end: 0000000100000000 type: 2
[ 0.000000] add_memory_region(00000000ffff0000, 0000000000010000, 2)
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 4096 pages, LIFO batch:0
[ 0.000000] Normal zone: 126960 pages, LIFO batch:31
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 AMI
) @ 0x000fa8f0
[ 0.000000] ACPI: RSDT (v001 AMIINT 0x00000010 MSFT
0x00000097) @ 0x1fff0000
[ 0.000000] ACPI: FADT (v001 AMIINT 0x00000010 MSFT
0x00000097) @ 0x1fff0030
[ 0.000000] ACPI: DSDT (v001 AMD75X IRONGATE 0x00001000 MSFT
0x0100000b) @ 0x00000000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dfff0000)
[ 0.000000] Detected 805.700 MHz processor.
[ 73.423215] Built 1 zonelists
[ 73.423223] Kernel command line: BOOT_IMAGE=bzimage lapic
root=/dev/sdc1 vga=6
[ 73.423729] Local APIC disabled by BIOS -- reenabling.
[ 73.423737] Found and enabled local APIC!
[ 73.423746] mapped APIC to ffffd000 (fee00000)
[ 73.423755] Enabling fast FPU save and restore... done.
[ 73.423764] Initializing CPU#0
[ 73.423909] CPU 0 irqstacks, hard=c03f3000 soft=c03f2000
[ 73.423920] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 73.427064] Console: colour VGA+ 80x60
[ 73.429590] Lock dependency validator: Copyright (c) 2006 Red Hat,
Inc., Ingo Molnar
[ 73.429743] ... MAX_LOCKDEP_SUBTYPES: 8
[ 73.429838] ... MAX_LOCK_DEPTH: 30
[ 73.429935] ... MAX_LOCKDEP_KEYS: 2048
[ 73.430030] ... TYPEHASH_SIZE: 1024
[ 73.430127] ... MAX_LOCKDEP_ENTRIES: 8192
[ 73.430222] ... MAX_LOCKDEP_CHAINS: 8192
[ 73.430316] ... CHAINHASH_SIZE: 4096
[ 73.430411] memory used by lock dependency info: 696 kB
[ 73.430508] per task-struct memory footprint: 1080 bytes
[ 73.430595] ------------------------
[ 73.430677] | Locking API testsuite:
[ 73.430760] ----------------------------------------------------------------------------
[ 73.430894] | spin |wlock |rlock
|mutex | wsem | rsem |
[ 73.431030]
--------------------------------------------------------------------------
[ 73.431186] A-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 73.433526] A-B-B-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 73.435923] A-B-B-C-C-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 73.438304] A-B-C-A-B-C deadlock: ok | ok | ok |
ok | ok | ok |
[ 73.440688] A-B-B-C-C-D-D-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 73.443151] A-B-C-D-B-D-D-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 73.445640] A-B-C-D-B-C-D-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 73.448083] double unlock: ok | ok | ok |
ok | ok | ok |
[ 73.450360] bad unlock order: ok | ok | ok |
ok | ok | ok |
[ 73.452675]
--------------------------------------------------------------------------
[ 73.452823] recursive read-lock: | ok |
| ok |
[ 73.453768]
--------------------------------------------------------------------------
[ 73.453947] non-nested unlock: ok | ok | ok | ok |
[ 73.455518] ------------------------------------------------------------
[ 73.455618] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 73.456799] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 73.457985] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 73.459163] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 73.460340] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 73.461532] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 73.462723] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 73.463929] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 73.465113] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 73.466299] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 73.467487] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 73.468692] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 73.469907] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 73.471119] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 73.472331] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 73.473538] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 73.474779] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 73.475982] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 73.477182] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 73.478371] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 73.479574] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 73.480780] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 73.481976] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 73.483181] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 73.484423] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 73.485629] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 73.486848] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 73.488061] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 73.489268] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 73.490471] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 73.491680] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 73.492885] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 73.494122] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 73.495334] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 73.496548] hard-irq lock-inversion/123: ok | ok | ok |
[ 73.497751] soft-irq lock-inversion/123: ok | ok | ok |
[ 73.498966] hard-irq lock-inversion/132: ok | ok | ok |
[ 73.500182] soft-irq lock-inversion/132: ok | ok | ok |
[ 73.501394] hard-irq lock-inversion/213: ok | ok | ok |
[ 73.502607] soft-irq lock-inversion/213: ok | ok | ok |
[ 73.503822] hard-irq lock-inversion/231: ok | ok | ok |
[ 73.505056] soft-irq lock-inversion/231: ok | ok | ok |
[ 73.506275] hard-irq lock-inversion/312: ok | ok | ok |
[ 73.507488] soft-irq lock-inversion/312: ok | ok | ok |
[ 73.508720] hard-irq lock-inversion/321: ok | ok | ok |
[ 73.509936] soft-irq lock-inversion/321: ok | ok | ok |
[ 73.511156] hard-irq read-recursion/123: ok |
[ 73.511652] soft-irq read-recursion/123: ok |
[ 73.512146] hard-irq read-recursion/132: ok |
[ 73.512640] soft-irq read-recursion/132: ok |
[ 73.513135] hard-irq read-recursion/213: ok |
[ 73.513630] soft-irq read-recursion/213: ok |
[ 73.514146] hard-irq read-recursion/231: ok |
[ 73.514628] soft-irq read-recursion/231: ok |
[ 73.515111] hard-irq read-recursion/312: ok |
[ 73.515590] soft-irq read-recursion/312: ok |
[ 73.516077] hard-irq read-recursion/321: ok |
[ 73.516562] soft-irq read-recursion/321: ok |
[ 73.517057] -------------------------------------------------------
[ 73.517155] Good, all 210 testcases passed! |
[ 73.517246] ---------------------------------
[ 73.518188] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 73.519170] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 73.567701] Memory: 514628k/524224k available (1572k kernel code,
9028k reserved, 909k data, 160k init, 0k highmem)
[ 73.567877] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 73.713687] Calibrating delay using timer specific routine..
1613.93 BogoMIPS (lpj=8069673)
[ 73.714134] Mount-cache hash table entries: 512
[ 73.715094] CPU: After generic identify, caps: 0183fbff c1c3fbff
00000000 00000000 00000000 00000000 00000000
[ 73.715127] CPU: After vendor identify, caps: 0183fbff c1c3fbff
00000000 00000000 00000000 00000000 00000000
[ 73.715159] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 73.715259] CPU: L2 Cache: 512K (64 bytes/line)
[ 73.715345] CPU: After all inits, caps: 0183fbff c1c3fbff 00000000
00000420 00000000 00000000 00000000
[ 73.715375] Intel machine check architecture supported.
[ 73.715464] Intel machine check reporting enabled on CPU#0.
[ 73.715560] Compat vDSO mapped to ffffe000.
[ 73.715663] CPU: AMD Athlon(tm) Processor stepping 01
[ 73.715818] Checking 'hlt' instruction... OK.
[ 73.753770] SMP alternatives: switching to UP code
[ 73.753865] Freeing SMP alternatives: 0k freed
[ 73.763218] ACPI: setting ELCR to 0010 (from 0e00)
[ 73.764030] lockdep: disabled NMI watchdog.
[ 73.889610] NET: Registered protocol family 16
[ 73.890016] ACPI: bus type pci registered
[ 73.902012] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
[ 73.902116] Setting up standard PCI resources
[ 73.904737] spurious 8259A interrupt: IRQ7.
[ 73.917948] ACPI: Subsystem revision 20060310
[ 73.933832] ACPI: Interpreter enabled
[ 73.933926] ACPI: Using PIC for interrupt routing
[ 73.936924] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 73.937057] PCI: Probing PCI hardware (bus 00)
[ 73.946681] Boot video device is 0000:01:05.0
[ 73.947042] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 73.957760] ACPI: Power Resource [URP1] (off)
[ 73.958278] ACPI: Power Resource [URP2] (off)
[ 73.958749] ACPI: Power Resource [FDDP] (off)
[ 73.959221] ACPI: Power Resource [LPTP] (off)
[ 73.961008] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10
11 12 14 15)
[ 73.962554] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10
*11 12 14 15)
[ 73.964102] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10
11 12 14 15)
[ 73.965597] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11
12 14 15) *0, disabled.
[ 73.966646] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 73.966851] pnp: PnP ACPI init
[ 73.973130] pnp: PnP ACPI: found 8 devices
[ 73.973242] PnPBIOS: Disabled by ACPI PNP
[ 73.974372] SCSI subsystem initialized
[ 73.974759] PCI: Using ACPI for IRQ routing
[ 73.974867] PCI: If a device doesn't work, try "pci=routeirq". If
it helps, post a report
[ 73.986036] PCI: Bridge: 0000:00:01.0
[ 73.986144] IO window: 9000-9fff
[ 73.986267] MEM window: e7d00000-efdfffff
[ 73.986376] PREFETCH window: e3b00000-e3bfffff
[ 73.986638] NET: Registered protocol family 2
[ 74.083678] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 74.084451] TCP established hash table entries: 16384 (order: 8,
1376256 bytes)
[ 74.092659] TCP bind hash table entries: 8192 (order: 7, 720896 bytes)
[ 74.097170] TCP: Hash tables configured (established 16384 bind 8192)
[ 74.097333] TCP reno registered
[ 74.099775] Machine check exception polling timer started.
[ 74.105643] Initializing Cryptographic API
[ 74.105781] io scheduler noop registered
[ 74.105959] io scheduler cfq registered (default)
[ 74.106509] ACPI: Power Button (FF) [PWRF]
[ 74.106627] ACPI: Sleep Button (FF) [SLPF]
[ 74.106745] ACPI: Power Button (CM) [PWRB]
[ 74.107319] isapnp: Scanning for PnP cards...
[ 74.464326] isapnp: No Plug & Play device found
[ 74.481654] Floppy drive(s): fd0 is 1.44M
[ 74.495209] FDC 0 is a post-1991 82077
[ 74.498173] libata version 1.30 loaded.
[ 74.498489] pata_pdc2027x 0000:00:0a.0: version 0.74
[ 74.499315] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 74.499430] PCI: setting IRQ 11 as level-triggered
[ 74.499440] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] ->
GSI 11 (level, low) -> IRQ 11
[ 74.599821] pata_pdc2027x 0000:00:0a.0: PLL input clock 16813 kHz
[ 74.630253] ata1: PATA max UDMA/133 cmd 0xE08097C0 ctl 0xE0809FDA
bmdma 0xE0809000 irq 11
[ 74.630582] ata2: PATA max UDMA/133 cmd 0xE08095C0 ctl 0xE0809DDA
bmdma 0xE0809008 irq 11
[ 74.783656] ata1.00: cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69
86:3e01 87:4003 88:407f
[ 74.783672] ata1.00: ATA-7, max UDMA/133, 490234752 sectors: LBA48
[ 74.784639] ata1.00: configured for UDMA/133
[ 74.784736] scsi0 : pata_pdc2027x
[ 74.943624] ata2.00: cfg 49:2f00 82:346b 83:7f01 84:4003 85:3469
86:3c01 87:4003 88:203f
[ 74.943638] ata2.00: ATA-6, max UDMA/100, 625142448 sectors: LBA48
[ 74.944727] ata2.00: configured for UDMA/100
[ 74.944827] scsi1 : pata_pdc2027x
[ 74.946048] Vendor: ATA Model: Maxtor 6Y250P0 Rev: YAR4
[ 74.947132] Type: Direct-Access ANSI SCSI
revision: 05
[ 74.948531] Vendor: ATA Model: WDC WD3200JB-00K Rev: 08.0
[ 74.949587] Type: Direct-Access ANSI SCSI
revision: 05
[ 74.950858] sata_sil 0000:00:0d.0: version 1.0
[ 74.951608] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 74.951721] PCI: setting IRQ 10 as level-triggered
[ 74.951731] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] ->
GSI 10 (level, low) -> IRQ 10
[ 74.952000] sata_sil 0000:00:0d.0: Applying R_ERR on DMA activate
FIS errata fix
[ 74.952353] ata3: SATA max UDMA/100 cmd 0xE080E480 ctl 0xE080E48A
bmdma 0xE080E400 irq 10
[ 74.952744] ata4: SATA max UDMA/100 cmd 0xE080E4C0 ctl 0xE080E4CA
bmdma 0xE080E408 irq 10
[ 74.953057] ata5: SATA max UDMA/100 cmd 0xE080E680 ctl 0xE080E68A
bmdma 0xE080E600 irq 10
[ 74.953387] ata6: SATA max UDMA/100 cmd 0xE080E6C0 ctl 0xE080E6CA
bmdma 0xE080E608 irq 10
[ 75.322421] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 75.323384] ata3.00: cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69
86:3e01 87:4003 88:207f
[ 75.323400] ata3.00: ATA-7, max UDMA/133, 585940320 sectors: LBA48
[ 75.323492] ata3.00: applying bridge limits
[ 75.324594] ata3.00: configured for UDMA/100
[ 75.324694] scsi2 : sata_sil
[ 75.692121] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 75.693397] ata4.00: cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469
86:3c01 87:4023 88:203f
[ 75.693410] ata4.00: ATA-7, max UDMA/100, 781422768 sectors: LBA48
[ 75.693513] ata4.00: applying bridge limits
[ 75.694898] ata4.00: configured for UDMA/100
[ 75.694996] scsi3 : sata_sil
[ 76.061822] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 76.062791] ata5.00: cfg 49:2f00 82:346b 83:7f01 84:4003 85:3469
86:3e01 87:4003 88:203f
[ 76.062805] ata5.00: ATA-6, max UDMA/100, 625142448 sectors: LBA48
[ 76.062906] ata5.00: applying bridge limits
[ 76.063980] ata5.00: configured for UDMA/100
[ 76.064076] scsi4 : sata_sil
[ 76.271637] ata6: SATA link down (SStatus 0 SControl 310)
[ 76.271756] scsi5 : sata_sil
[ 76.272693] Vendor: ATA Model: Maxtor 4A300J0 Rev: RAMB
[ 76.273756] Type: Direct-Access ANSI SCSI
revision: 05
[ 76.275160] Vendor: ATA Model: ST3400832A Rev: 3.01
[ 76.276243] Type: Direct-Access ANSI SCSI
revision: 05
[ 76.277685] Vendor: ATA Model: WDC WD3200JB-00K Rev: 08.0
[ 76.278717] Type: Direct-Access ANSI SCSI
revision: 05
[ 76.280592] SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
[ 76.280796] sda: Write Protect is off
[ 76.280900] sda: Mode Sense: 00 3a 00 00
[ 76.281068] SCSI device sda: drive cache: write back
[ 76.281711] SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
[ 76.281919] sda: Write Protect is off
[ 76.282019] sda: Mode Sense: 00 3a 00 00
[ 76.282214] SCSI device sda: drive cache: write back
[ 76.282312] sda: unknown partition table
[ 76.284598] sd 0:0:0:0: Attached scsi disk sda
[ 76.285234] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[ 76.285426] sdb: Write Protect is off
[ 76.285521] sdb: Mode Sense: 00 3a 00 00
[ 76.285687] SCSI device sdb: drive cache: write back
[ 76.286193] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[ 76.286393] sdb: Write Protect is off
[ 76.286491] sdb: Mode Sense: 00 3a 00 00
[ 76.286680] SCSI device sdb: drive cache: write back
[ 76.286787] sdb: unknown partition table
[ 76.290732] sd 1:0:0:0: Attached scsi disk sdb
[ 76.291330] SCSI device sdc: 585940320 512-byte hdwr sectors (300001 MB)
[ 76.291521] sdc: Write Protect is off
[ 76.291654] sdc: Mode Sense: 00 3a 00 00
[ 76.291827] SCSI device sdc: drive cache: write back
[ 76.292338] SCSI device sdc: 585940320 512-byte hdwr sectors (300001 MB)
[ 76.292542] sdc: Write Protect is off
[ 76.292640] sdc: Mode Sense: 00 3a 00 00
[ 76.292830] SCSI device sdc: drive cache: write back
[ 76.292932] sdc: sdc1
[ 76.295994] sd 2:0:0:0: Attached scsi disk sdc
[ 76.296559] SCSI device sdd: 781422768 512-byte hdwr sectors (400088 MB)
[ 76.296750] sdd: Write Protect is off
[ 76.296855] sdd: Mode Sense: 00 3a 00 00
[ 76.297021] SCSI device sdd: drive cache: write back
[ 76.297532] SCSI device sdd: 781422768 512-byte hdwr sectors (400088 MB)
[ 76.297732] sdd: Write Protect is off
[ 76.297838] sdd: Mode Sense: 00 3a 00 00
[ 76.298029] SCSI device sdd: drive cache: write back
[ 76.298125] sdd: unknown partition table
[ 76.318711] sd 3:0:0:0: Attached scsi disk sdd
[ 76.319289] SCSI device sde: 625142448 512-byte hdwr sectors (320073 MB)
[ 76.319486] sde: Write Protect is off
[ 76.319585] sde: Mode Sense: 00 3a 00 00
[ 76.319753] SCSI device sde: drive cache: write back
[ 76.320256] SCSI device sde: 625142448 512-byte hdwr sectors (320073 MB)
[ 76.320459] sde: Write Protect is off
[ 76.320556] sde: Mode Sense: 00 3a 00 00
[ 76.320744] SCSI device sde: drive cache: write back
[ 76.320845] sde: sde1 sde2
[ 76.345135] sd 4:0:0:0: Attached scsi disk sde
[ 76.348042] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 76.348939] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 76.349085] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 76.350900] mice: PS/2 mouse device common for all mice
[ 76.351297] NET: Registered protocol family 1
[ 76.351434] Using IPI Shortcut mode
[ 76.351560] Time: tsc clocksource has been installed.
[ 76.352398] ACPI: (supports S0 S1 S4 S5)
[ 76.353382] Freeing unused kernel memory: 160k freed
[ 76.353666] Write protecting the kernel read-only data: 312k
[ 76.367030] ReiserFS: sdc1: found reiserfs format "3.6" with standard journal
[ 76.386846] input: AT Translated Set 2 keyboard as /class/input/input0
[ 76.562009] logips2pp: Detected unknown logitech mouse model 0
[ 77.082794] input: PS/2 Logitech Mouse as /class/input/input1
[ 94.743067] ReiserFS: sdc1: using ordered data mode
[ 94.776394] ReiserFS: sdc1: journal params: device sdc1, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 94.779773] ReiserFS: sdc1: checking transaction log (sdc1)
[ 94.876353] ReiserFS: sdc1: Using r5 hash to sort names
[ 102.593054] Real Time Clock Driver v1.12ac
[ 105.344061] Linux Tulip driver version 1.1.13-NAPI (December 15, 2004)
[ 105.345362] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 105.345473] PCI: setting IRQ 9 as level-triggered
[ 105.345483] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] ->
GSI 9 (level, low) -> IRQ 9
[ 105.361941] tulip0: EEPROM default media type Autosense.
[ 105.362049] tulip0: Index #0 - Media MII (#11) described by a
21142 MII PHY (3) block.
[ 105.366477] tulip0: MII transceiver #1 config 1000 status 782d
advertising 01e1.
[ 105.371705] eth0: Digital DS21143 Tulip rev 65 at 0001d000,
00:C0:F0:4A:0C:46, IRQ 9.
[ 105.396983] pcnet32.c:v1.32 18.Mar.2006 [email protected]
[ 105.495725] NET: Registered protocol family 5
[ 105.589618] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[ 105.590217] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] ->
GSI 10 (level, low) -> IRQ 10
[ 105.590542] eth1: ns83820.c: 0x22c: 00000000, subsystem: 0000:0000
[ 105.617982] eth1: ns83820 v0.23: DP83820 v1.2: 00:4f:4a:00:13:5a
io=0xefffb000 irq=10 f=sg
[ 106.262717] Loading Reiser4. See www.namesys.com for a description
of Reiser4.
[ 139.032547] JFS: nTxBlock = 4023, nTxLock = 32185
[ 157.143387] Installing knfsd (copyright (C) 1996 [email protected]).
[ 158.625829] eth1: link now 1000 mbps, full duplex and up.
[ 161.533134] eth0: Setting full-duplex based on MII#1 link partner
capability of cde1.
[ 170.556683] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 170.558038] NFSD: starting 90-second grace period
[ 1637.890434]
[ 1637.890440] ======================================
[ 1637.890641] [ BUG: bad unlock ordering detected! ]
[ 1637.890741] --------------------------------------
[ 1637.890841] mv/935 is trying to release lock (&mgr->tmgr_lock) at:
[ 1637.890996] [<e098e01b>] try_capture+0x306/0x9b1 [reiser4]
[ 1637.891255] but the next lock to release is:
[ 1637.891344] (&atom->alock){--..}, at: [<e098dfe2>]
try_capture+0x2cd/0x9b1 [reiser4]
[ 1637.891667]
[ 1637.891670] other info that might help us debug this:
[ 1637.891854] 3 locks held by mv/935:
[ 1637.891951] #0: (&inode->i_mutex/1){--..}, at: [<c0160325>]
lock_rename+0xba/0xc1
[ 1637.892297] #1: (&mgr->tmgr_lock){--..}, at: [<e098deb5>]
try_capture+0x1a0/0x9b1 [reiser4]
[ 1637.892647] #2: (&txnh->hlock){--..}, at: [<e098debd>]
try_capture+0x1a8/0x9b1 [reiser4]
[ 1637.892994]
[ 1637.892996] stack backtrace:
[ 1637.893577] [<c010311a>] show_trace_log_lvl+0x54/0xfd
[ 1637.893738] [<c0103709>] show_trace+0xd/0x10
[ 1637.893893] [<c0103750>] dump_stack+0x19/0x1b
[ 1637.894045] [<c012d713>] lockdep_release+0x18b/0x350
[ 1637.894407] [<c02880d9>] _spin_unlock+0x16/0x1f
[ 1637.894777] [<e098e01b>] try_capture+0x306/0x9b1 [reiser4]
[ 1637.895048] [<e0988a80>] longterm_lock_znode+0x2e3/0x3e3 [reiser4]
[ 1637.895254] [<e0995790>] coord_by_handle+0x136/0xaf4 [reiser4]
[ 1637.895515] [<e09962de>] object_lookup+0x8e/0x96 [reiser4]
[ 1637.895764] [<e09a9ece>] find_entry+0xbb/0x200 [reiser4]
[ 1637.896134] [<e099fab1>] rename_common+0x96b/0x9b6 [reiser4]
[ 1637.896440] [<c0160e96>] vfs_rename+0x1dd/0x315
[ 1637.897098] [<c0162b84>] sys_renameat+0x1bb/0x22a
[ 1637.897664] [<c0162c05>] sys_rename+0x12/0x14
[ 1637.898220] [<c0288283>] syscall_call+0x7/0xb
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
