This should have gone to linux-scsi of course. Fup'to to -scsi instead
of -kernel please.
On Sat, Jun 03, 2006 at 01:26:10PM +0200, Christoph Hellwig wrote:
> Currently struct scsi_cmnd has various fields that are used to backup
> original data after the corresponding fields have been overridden for
> EH commands. This means drivers can easily get at it and misuse it.
> Due to the old_ naming this doesn't happen for most of them, but two
> that have different names have been used wrong a lot (see previous
> patch). Another downside is that they unessecarily bloat the scsi_cmnd
> size.
>
> This patch moves them onstack in scsi_send_eh_cmnd to fix those two
> issues above.
>
> Note that this breaks the aha152x and 53x700 drivers because they're
> plaing with those fields internally.
>
> J"urgen and James, could you take a look at whether it's feasible to
> fix those drivers?
>
> Otherwise any comments on the general approach?
>
> (Note: you probably want the patch to remove the wrong buffer and
> bufflen patches applied before this, else lots of drivers will stop
> compiling)
>
> Index: scsi-misc-2.6/drivers/scsi/scsi_error.c
> ===================================================================
> --- scsi-misc-2.6.orig/drivers/scsi/scsi_error.c 2006-06-02 18:20:23.000000000 +0200
> +++ scsi-misc-2.6/drivers/scsi/scsi_error.c 2006-06-03 12:31:05.000000000 +0200
> @@ -438,19 +438,67 @@
> * Return value:
> * SUCCESS or FAILED or NEEDS_RETRY
> **/
> -static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout)
> +static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout, int copy_sense)
> {
> struct scsi_device *sdev = scmd->device;
> struct Scsi_Host *shost = sdev->host;
> + int old_result = scmd->result;
> DECLARE_COMPLETION(done);
> unsigned long timeleft;
> unsigned long flags;
> + unsigned char old_cmnd[MAX_COMMAND_SIZE];
> + enum dma_data_direction old_data_direction;
> + unsigned short old_use_sg;
> + unsigned char old_cmd_len;
> + unsigned old_bufflen;
> + void *old_buffer;
> int rtn;
>
> + /*
> + * We need saved copies of a number of fields - this is because
> + * error handling may need to overwrite these with different values
> + * to run different commands, and once error handling is complete,
> + * we will need to restore these values prior to running the actual
> + * command.
> + */
> + old_buffer = scmd->request_buffer;
> + old_bufflen = scmd->request_bufflen;
> + memcpy(old_cmnd, scmd->cmnd, sizeof(scmd->cmnd));
> + old_data_direction = scmd->sc_data_direction;
> + old_cmd_len = scmd->cmd_len;
> + old_use_sg = scmd->use_sg;
> +
> + if (copy_sense) {
> + int gfp_mask = GFP_ATOMIC;
> +
> + if (shost->hostt->unchecked_isa_dma)
> + gfp_mask |= __GFP_DMA;
> +
> + scmd->sc_data_direction = DMA_FROM_DEVICE;
> + scmd->request_bufflen = 252;
> + scmd->request_buffer = kzalloc(scmd->request_bufflen, gfp_mask);
> + if (!scmd->request_buffer)
> + return FAILED;
> + } else {
> + scmd->request_buffer = NULL;
> + scmd->request_bufflen = 0;
> + scmd->sc_data_direction = DMA_NONE;
> + }
> +
> + scmd->underflow = 0;
> + scmd->use_sg = 0;
> + scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
> +
> if (sdev->scsi_level <= SCSI_2)
> scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) |
> (sdev->lun << 5 & 0xe0);
>
> + /*
> + * Zero the sense buffer. The scsi spec mandates that any
> + * untransferred sense data should be interpreted as being zero.
> + */
> + memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer));
> +
> shost->eh_action = &done;
> scmd->request->rq_status = RQ_SCSI_BUSY;
>
> @@ -502,6 +550,27 @@
> rtn = FAILED;
> }
>
> +
> + /*
> + * Last chance to have valid sense data.
> + */
> + if (copy_sense && !SCSI_SENSE_VALID(scmd)) {
> + memcpy(scmd->sense_buffer, scmd->request_buffer,
> + sizeof(scmd->sense_buffer));
> + kfree(scmd->request_buffer);
> + }
> +
> +
> + /*
> + * Restore original data
> + */
> + scmd->request_buffer = old_buffer;
> + scmd->request_bufflen = old_bufflen;
> + memcpy(scmd->cmnd, old_cmnd, sizeof(scmd->cmnd));
> + scmd->sc_data_direction = old_data_direction;
> + scmd->cmd_len = old_cmd_len;
> + scmd->use_sg = old_use_sg;
> + scmd->result = old_result;
> return rtn;
> }
>
> @@ -517,56 +586,10 @@
> static int scsi_request_sense(struct scsi_cmnd *scmd)
> {
> static unsigned char generic_sense[6] =
> - {REQUEST_SENSE, 0, 0, 0, 252, 0};
> - unsigned char *scsi_result;
> - int saved_result;
> - int rtn;
> + {REQUEST_SENSE, 0, 0, 0, 252, 0};
>
> memcpy(scmd->cmnd, generic_sense, sizeof(generic_sense));
> -
> - scsi_result = kmalloc(252, GFP_ATOMIC | ((scmd->device->host->hostt->unchecked_isa_dma) ? __GFP_DMA : 0));
> -
> -
> - if (unlikely(!scsi_result)) {
> - printk(KERN_ERR "%s: cannot allocate scsi_result.\n",
> - __FUNCTION__);
> - return FAILED;
> - }
> -
> - /*
> - * zero the sense buffer. some host adapters automatically always
> - * request sense, so it is not a good idea that
> - * scmd->request_buffer and scmd->sense_buffer point to the same
> - * address (db). 0 is not a valid sense code.
> - */
> - memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer));
> - memset(scsi_result, 0, 252);
> -
> - saved_result = scmd->result;
> - scmd->request_buffer = scsi_result;
> - scmd->request_bufflen = 252;
> - scmd->use_sg = 0;
> - scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
> - scmd->sc_data_direction = DMA_FROM_DEVICE;
> - scmd->underflow = 0;
> -
> - rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT);
> -
> - /* last chance to have valid sense data */
> - if(!SCSI_SENSE_VALID(scmd)) {
> - memcpy(scmd->sense_buffer, scmd->request_buffer,
> - sizeof(scmd->sense_buffer));
> - }
> -
> - kfree(scsi_result);
> -
> - /*
> - * when we eventually call scsi_finish, we really wish to complete
> - * the original request, so let's restore the original data. (db)
> - */
> - scsi_setup_cmd_retry(scmd);
> - scmd->result = saved_result;
> - return rtn;
> + return scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 1);
> }
>
> /**
> @@ -585,12 +608,6 @@
> {
> scmd->device->host->host_failed--;
> scmd->eh_eflags = 0;
> -
> - /*
> - * set this back so that the upper level can correctly free up
> - * things.
> - */
> - scsi_setup_cmd_retry(scmd);
> list_move_tail(&scmd->eh_entry, done_q);
> }
> EXPORT_SYMBOL(scsi_eh_finish_cmd);
> @@ -695,47 +712,26 @@
> {
> static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0};
> int retry_cnt = 1, rtn;
> - int saved_result;
>
> retry_tur:
> memcpy(scmd->cmnd, tur_command, sizeof(tur_command));
>
> - /*
> - * zero the sense buffer. the scsi spec mandates that any
> - * untransferred sense data should be interpreted as being zero.
> - */
> - memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer));
>
> - saved_result = scmd->result;
> - scmd->request_buffer = NULL;
> - scmd->request_bufflen = 0;
> - scmd->use_sg = 0;
> - scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
> - scmd->underflow = 0;
> - scmd->sc_data_direction = DMA_NONE;
> + rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 0);
>
> - rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT);
> -
> - /*
> - * when we eventually call scsi_finish, we really wish to complete
> - * the original request, so let's restore the original data. (db)
> - */
> - scsi_setup_cmd_retry(scmd);
> - scmd->result = saved_result;
> -
> - /*
> - * hey, we are done. let's look to see what happened.
> - */
> SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n",
> __FUNCTION__, scmd, rtn));
> - if (rtn == SUCCESS)
> - return 0;
> - else if (rtn == NEEDS_RETRY) {
> +
> + switch (rtn) {
> + case NEEDS_RETRY:
> if (retry_cnt--)
> goto retry_tur;
> + /*FALLTHRU*/
> + case SUCCESS:
> return 0;
> + default:
> + return 1;
> }
> - return 1;
> }
>
> /**
> @@ -817,44 +813,16 @@
> static int scsi_eh_try_stu(struct scsi_cmnd *scmd)
> {
> static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0};
> - int rtn;
> - int saved_result;
> -
> - if (!scmd->device->allow_restart)
> - return 1;
> -
> - memcpy(scmd->cmnd, stu_command, sizeof(stu_command));
> -
> - /*
> - * zero the sense buffer. the scsi spec mandates that any
> - * untransferred sense data should be interpreted as being zero.
> - */
> - memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer));
>
> - saved_result = scmd->result;
> - scmd->request_buffer = NULL;
> - scmd->request_bufflen = 0;
> - scmd->use_sg = 0;
> - scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
> - scmd->underflow = 0;
> - scmd->sc_data_direction = DMA_NONE;
> + if (scmd->device->allow_restart) {
> + int rtn;
>
> - rtn = scsi_send_eh_cmnd(scmd, START_UNIT_TIMEOUT);
> -
> - /*
> - * when we eventually call scsi_finish, we really wish to complete
> - * the original request, so let's restore the original data. (db)
> - */
> - scsi_setup_cmd_retry(scmd);
> - scmd->result = saved_result;
> + memcpy(scmd->cmnd, stu_command, sizeof(stu_command));
> + rtn = scsi_send_eh_cmnd(scmd, START_UNIT_TIMEOUT, 0);
> + if (rtn == SUCCESS)
> + return 0;
> + }
>
> - /*
> - * hey, we are done. let's look to see what happened.
> - */
> - SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n",
> - __FUNCTION__, scmd, rtn));
> - if (rtn == SUCCESS)
> - return 0;
> return 1;
> }
>
> @@ -1663,8 +1631,6 @@
>
> scmd->scsi_done = scsi_reset_provider_done_command;
> scmd->done = NULL;
> - scmd->buffer = NULL;
> - scmd->bufflen = 0;
> scmd->request_buffer = NULL;
> scmd->request_bufflen = 0;
>
> Index: scsi-misc-2.6/drivers/scsi/scsi_lib.c
> ===================================================================
> --- scsi-misc-2.6.orig/drivers/scsi/scsi_lib.c 2006-06-02 18:20:23.000000000 +0200
> +++ scsi-misc-2.6/drivers/scsi/scsi_lib.c 2006-06-03 12:31:05.000000000 +0200
> @@ -502,60 +502,16 @@
> *
> * Arguments: cmd - command that is ready to be queued.
> *
> - * Returns: Nothing
> - *
> * Notes: This function has the job of initializing a number of
> * fields related to error handling. Typically this will
> * be called once for each command, as required.
> */
> -static int scsi_init_cmd_errh(struct scsi_cmnd *cmd)
> +static void scsi_init_cmd_errh(struct scsi_cmnd *cmd)
> {
> cmd->serial_number = 0;
> -
> memset(cmd->sense_buffer, 0, sizeof cmd->sense_buffer);
> -
> if (cmd->cmd_len == 0)
> cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]);
> -
> - /*
> - * We need saved copies of a number of fields - this is because
> - * error handling may need to overwrite these with different values
> - * to run different commands, and once error handling is complete,
> - * we will need to restore these values prior to running the actual
> - * command.
> - */
> - cmd->old_use_sg = cmd->use_sg;
> - cmd->old_cmd_len = cmd->cmd_len;
> - cmd->sc_old_data_direction = cmd->sc_data_direction;
> - cmd->old_underflow = cmd->underflow;
> - memcpy(cmd->data_cmnd, cmd->cmnd, sizeof(cmd->cmnd));
> - cmd->buffer = cmd->request_buffer;
> - cmd->bufflen = cmd->request_bufflen;
> -
> - return 1;
> -}
> -
> -/*
> - * Function: scsi_setup_cmd_retry()
> - *
> - * Purpose: Restore the command state for a retry
> - *
> - * Arguments: cmd - command to be restored
> - *
> - * Returns: Nothing
> - *
> - * Notes: Immediately prior to retrying a command, we need
> - * to restore certain fields that we saved above.
> - */
> -void scsi_setup_cmd_retry(struct scsi_cmnd *cmd)
> -{
> - memcpy(cmd->cmnd, cmd->data_cmnd, sizeof(cmd->data_cmnd));
> - cmd->request_buffer = cmd->buffer;
> - cmd->request_bufflen = cmd->bufflen;
> - cmd->use_sg = cmd->old_use_sg;
> - cmd->cmd_len = cmd->old_cmd_len;
> - cmd->sc_data_direction = cmd->sc_old_data_direction;
> - cmd->underflow = cmd->old_underflow;
> }
>
> void scsi_device_unbusy(struct scsi_device *sdev)
> @@ -873,22 +829,13 @@
> */
> static void scsi_release_buffers(struct scsi_cmnd *cmd)
> {
> - struct request *req = cmd->request;
> -
> - /*
> - * Free up any indirection buffers we allocated for DMA purposes.
> - */
> if (cmd->use_sg)
> scsi_free_sgtable(cmd->request_buffer, cmd->sglist_len);
> - else if (cmd->request_buffer != req->buffer)
> - kfree(cmd->request_buffer);
>
> /*
> * Zero these out. They now point to freed memory, and it is
> * dangerous to hang onto the pointers.
> */
> - cmd->buffer = NULL;
> - cmd->bufflen = 0;
> cmd->request_buffer = NULL;
> cmd->request_bufflen = 0;
> }
> @@ -925,7 +872,7 @@
> unsigned int block_bytes)
> {
> int result = cmd->result;
> - int this_count = cmd->bufflen;
> + int this_count = cmd->request_bufflen;
> request_queue_t *q = cmd->device->request_queue;
> struct request *req = cmd->request;
> int clear_errors = 1;
> @@ -933,28 +880,14 @@
> int sense_valid = 0;
> int sense_deferred = 0;
>
> - /*
> - * Free up any indirection buffers we allocated for DMA purposes.
> - * For the case of a READ, we need to copy the data out of the
> - * bounce buffer and into the real buffer.
> - */
> - if (cmd->use_sg)
> - scsi_free_sgtable(cmd->buffer, cmd->sglist_len);
> - else if (cmd->buffer != req->buffer) {
> - if (rq_data_dir(req) == READ) {
> - unsigned long flags;
> - char *to = bio_kmap_irq(req->bio, &flags);
> - memcpy(to, cmd->buffer, cmd->bufflen);
> - bio_kunmap_irq(to, &flags);
> - }
> - kfree(cmd->buffer);
> - }
> + scsi_release_buffers(cmd);
>
> if (result) {
> sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
> if (sense_valid)
> sense_deferred = scsi_sense_is_deferred(&sshdr);
> }
> +
> if (blk_pc_request(req)) { /* SG_IO ioctl from block level */
> req->errors = result;
> if (result) {
> @@ -975,15 +908,6 @@
> }
>
> /*
> - * Zero these out. They now point to freed memory, and it is
> - * dangerous to hang onto the pointers.
> - */
> - cmd->buffer = NULL;
> - cmd->bufflen = 0;
> - cmd->request_buffer = NULL;
> - cmd->request_bufflen = 0;
> -
> - /*
> * Next deal with any sectors which we were able to correctly
> * handle.
> */
> @@ -1083,7 +1007,7 @@
> if (!(req->flags & REQ_QUIET)) {
> scmd_printk(KERN_INFO, cmd,
> "Volume overflow, CDB: ");
> - __scsi_print_command(cmd->data_cmnd);
> + __scsi_print_command(cmd->cmnd);
> scsi_print_sense("", cmd);
> }
> scsi_end_request(cmd, 0, block_bytes, 1);
> @@ -1222,7 +1146,7 @@
> * successfully. Since this is a REQ_BLOCK_PC command the
> * caller should check the request's errors value
> */
> - scsi_io_completion(cmd, cmd->bufflen, 0);
> + scsi_io_completion(cmd, cmd->request_bufflen, 0);
> }
>
> static void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd)
> Index: scsi-misc-2.6/drivers/scsi/scsi.c
> ===================================================================
> --- scsi-misc-2.6.orig/drivers/scsi/scsi.c 2006-06-02 18:20:23.000000000 +0200
> +++ scsi-misc-2.6/drivers/scsi/scsi.c 2006-06-03 12:31:05.000000000 +0200
> @@ -420,7 +420,7 @@
> if (level > 3) {
> printk(KERN_INFO "buffer = 0x%p, bufflen = %d,"
> " done = 0x%p, queuecommand 0x%p\n",
> - cmd->buffer, cmd->bufflen,
> + cmd->request_buffer, cmd->request_bufflen,
> cmd->done,
> sdev->host->hostt->queuecommand);
>
> @@ -678,10 +678,7 @@
> cmd->use_sg = sreq->sr_use_sg;
>
> cmd->request = sreq->sr_request;
> - memcpy(cmd->data_cmnd, sreq->sr_cmnd, sizeof(cmd->data_cmnd));
> cmd->serial_number = 0;
> - cmd->bufflen = sreq->sr_bufflen;
> - cmd->buffer = sreq->sr_buffer;
> cmd->retries = 0;
> cmd->allowed = sreq->sr_allowed;
> cmd->done = sreq->sr_done;
> @@ -699,12 +696,8 @@
> memset(cmd->sense_buffer, 0, sizeof(sreq->sr_sense_buffer));
> cmd->request_buffer = sreq->sr_buffer;
> cmd->request_bufflen = sreq->sr_bufflen;
> - cmd->old_use_sg = cmd->use_sg;
> if (cmd->cmd_len == 0)
> cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]);
> - cmd->old_cmd_len = cmd->cmd_len;
> - cmd->sc_old_data_direction = cmd->sc_data_direction;
> - cmd->old_underflow = cmd->underflow;
>
> /*
> * Start the timer ticking.
> @@ -784,11 +777,6 @@
> */
> int scsi_retry_command(struct scsi_cmnd *cmd)
> {
> - /*
> - * Restore the SCSI command state.
> - */
> - scsi_setup_cmd_retry(cmd);
> -
> /*
> * Zero the sense information from the last time we tried
> * this command.
> @@ -836,11 +824,6 @@
> "(result %x)\n", cmd->result));
>
> /*
> - * We can get here with use_sg=0, causing a panic in the upper level
> - */
> - cmd->use_sg = cmd->old_use_sg;
> -
> - /*
> * If there is an associated request structure, copy the data over
> * before we call the completion function.
> */
> Index: scsi-misc-2.6/include/scsi/scsi_cmnd.h
> ===================================================================
> --- scsi-misc-2.6.orig/include/scsi/scsi_cmnd.h 2006-06-03 12:07:51.000000000 +0200
> +++ scsi-misc-2.6/include/scsi/scsi_cmnd.h 2006-06-03 12:31:05.000000000 +0200
> @@ -64,9 +64,7 @@
> int timeout_per_command;
>
> unsigned char cmd_len;
> - unsigned char old_cmd_len;
> enum dma_data_direction sc_data_direction;
> - enum dma_data_direction sc_old_data_direction;
>
> /* These elements define the operation we are about to perform */
> #define MAX_COMMAND_SIZE 16
> @@ -77,18 +75,11 @@
> void *request_buffer; /* Actual requested buffer */
>
> /* These elements define the operation we ultimately want to perform */
> - unsigned char data_cmnd[MAX_COMMAND_SIZE];
> - unsigned short old_use_sg; /* We save use_sg here when requesting
> - * sense info */
> unsigned short use_sg; /* Number of pieces of scatter-gather */
> unsigned short sglist_len; /* size of malloc'd scatter-gather list */
> - unsigned bufflen; /* Size of data buffer */
> - void *buffer; /* Data buffer */
>
> unsigned underflow; /* Return error if less than
> this amount is transferred */
> - unsigned old_underflow; /* save underflow here when reusing the
> - * command for error handling */
>
> unsigned transfersize; /* How much we are guaranteed to
> transfer with each SCSI transfer
> Index: scsi-misc-2.6/drivers/scsi/scsi_priv.h
> ===================================================================
> --- scsi-misc-2.6.orig/drivers/scsi/scsi_priv.h 2006-06-02 18:20:23.000000000 +0200
> +++ scsi-misc-2.6/drivers/scsi/scsi_priv.h 2006-06-03 12:31:05.000000000 +0200
> @@ -68,7 +68,6 @@
>
> /* scsi_lib.c */
> extern int scsi_maybe_unblock_host(struct scsi_device *sdev);
> -extern void scsi_setup_cmd_retry(struct scsi_cmnd *cmd);
> extern void scsi_device_unbusy(struct scsi_device *sdev);
> extern int scsi_queue_insert(struct scsi_cmnd *cmd, int reason);
> extern void scsi_next_command(struct scsi_cmnd *cmd);
> Index: scsi-misc-2.6/drivers/scsi/sd.c
> ===================================================================
> --- scsi-misc-2.6.orig/drivers/scsi/sd.c 2006-06-03 12:25:32.000000000 +0200
> +++ scsi-misc-2.6/drivers/scsi/sd.c 2006-06-03 12:31:05.000000000 +0200
> @@ -477,8 +477,7 @@
> SCpnt->cmnd[4] = (unsigned char) this_count;
> SCpnt->cmnd[5] = 0;
> }
> - SCpnt->request_bufflen = SCpnt->bufflen =
> - this_count * sdp->sector_size;
> + SCpnt->request_bufflen = this_count * sdp->sector_size;
>
> /*
> * We shouldn't disconnect in the middle of a sector, so with a dumb
> Index: scsi-misc-2.6/drivers/scsi/sr.c
> ===================================================================
> --- scsi-misc-2.6.orig/drivers/scsi/sr.c 2006-06-03 12:25:32.000000000 +0200
> +++ scsi-misc-2.6/drivers/scsi/sr.c 2006-06-03 12:31:05.000000000 +0200
> @@ -360,7 +360,7 @@
> "mismatch count %d, bytes %d\n",
> size, SCpnt->request_bufflen);
> if (SCpnt->request_bufflen > size)
> - SCpnt->request_bufflen = SCpnt->bufflen = size;
> + SCpnt->request_bufflen = size;
> }
> }
>
> @@ -387,8 +387,7 @@
>
> if (this_count > 0xffff) {
> this_count = 0xffff;
> - SCpnt->request_bufflen = SCpnt->bufflen =
> - this_count * s_size;
> + SCpnt->request_bufflen = this_count * s_size;
> }
>
> SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
> Index: scsi-misc-2.6/drivers/scsi/aha152x.c
> ===================================================================
> --- scsi-misc-2.6.orig/drivers/scsi/aha152x.c 2006-06-02 18:20:22.000000000 +0200
> +++ scsi-misc-2.6/drivers/scsi/aha152x.c 2006-06-03 12:39:30.000000000 +0200
> @@ -1165,6 +1165,10 @@
> DECLARE_MUTEX_LOCKED(sem);
> struct timer_list timer;
> int ret, issued, disconnected;
> + unsigned char old_cmd_len = SCpnt->cmd_len;
> + unsigned short old_use_sg = SCpnt->use_sg;
> + void *old_buffer = SCpnt->request_buffer;
> + unsigned old_bufflen = SCpnt->request_bufflen;
> unsigned long flags;
>
> #if defined(AHA152X_DEBUG)
> @@ -1198,11 +1202,11 @@
> add_timer(&timer);
> down(&sem);
> del_timer(&timer);
> -
> - SCpnt->cmd_len = SCpnt->old_cmd_len;
> - SCpnt->use_sg = SCpnt->old_use_sg;
> - SCpnt->request_buffer = SCpnt->buffer;
> - SCpnt->request_bufflen = SCpnt->bufflen;
> +
> + SCpnt->cmd_len = old_cmd_len;
> + SCpnt->use_sg = old_use_sg;
> + SCpnt->request_buffer = old_buffer;
> + SCpnt->request_bufflen = old_bufflen;
>
> DO_LOCK(flags);
>
---end quoted text---
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
