On Thu, Jun 01, 2006 at 12:42:45AM +0200, Frank Gevaerts wrote:
> This patch fixes several problems in the ipaq.c driver with connecting
> and disconnecting pocketpc devices:
Unfortunately, it is apparently not the whole story.
There are some problems:
With this patch, whenever the usb_control_msg returns with ENODEV (-19),
we get the following :
Jun 1 10:02:06 localhost kernel: BUG: unable to handle kernel paging request at virtual address 723d4ecb
Jun 1 10:02:06 localhost kernel: printing eip:
Jun 1 10:02:06 localhost kernel: b01e579b
Jun 1 10:02:06 localhost kernel: *pde = 00000000
Jun 1 10:02:06 localhost kernel: Oops: 0000 [#1]
Jun 1 10:02:06 localhost kernel: Modules linked in: ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt ppp_generic slhc usbhid ipaq uhci_hcd usbserial ohci_hcd ehci_hcd usbcore 8139too mii sr_mod sbp2 scsi_mod ieee1394 psmouse ide_generic ide_cd cdrom genrtc ext3 jbd mbcache ide_disk generic via82cxxx ide_core evdev mousedev
Jun 1 10:02:06 localhost kernel: CPU: 0
Jun 1 10:02:06 localhost kernel: EIP: 0060:[check_tty_count+39/110] Not tainted VLI
Jun 1 10:02:06 localhost kernel: EFLAGS: 00010246 (2.6.17-rc4 #4)
Jun 1 10:02:06 localhost kernel: EIP is at check_tty_count+0x27/0x6e
Jun 1 10:02:06 localhost kernel: eax: 723d4e4f ebx: c95f6000 ecx: c95f6170 edx: c95f6170
Jun 1 10:02:06 localhost kernel: esi: 00000000 edi: b0287619 ebp: 00000000 esp: cbec7f44
Jun 1 10:02:06 localhost kernel: ds: 007b es: 007b ss: 0068
Jun 1 10:02:06 localhost kernel: Process events/0 (pid: 4, threadinfo=cbec6000 task=cbfdfa70)
Jun 1 10:02:06 localhost kernel: Stack: <0>c95f613c c95f6000 00000283 b01e5fb0 cbfe53a8 cbfe53a8 c95f613c cbfe53a0
Jun 1 10:02:06 localhost kernel: 00000283 c95f6000 b01219b1 c95f6000 b01e5f75 cbfe53a8 cbfe53a0 cbfe53b0
Jun 1 10:02:06 localhost kernel: b0121a55 b0121b34 00000001 00000000 000f41fa 00010000 00000000 00000000
Jun 1 10:02:06 localhost kernel: Call Trace:
Jun 1 10:02:06 localhost kernel: <b01e5fb0> do_tty_hangup+0x3b/0x263 <b01219b1> run_workqueue+0x64/0x94
Jun 1 10:02:06 localhost kernel: <b01e5f75> do_tty_hangup+0x0/0x263 <b0121a55> worker_thread+0x0/0x10f
Jun 1 10:02:06 localhost kernel: <b0121b34> worker_thread+0xdf/0x10f <b01137ca> default_wake_function+0x0/0x15
Jun 1 10:02:06 localhost kernel: <b0123f4a> kthread+0x94/0xc1 <b0123eb6> kthread+0x0/0xc1
Jun 1 10:02:06 localhost kernel: <b0101005> kernel_thread_helper+0x5/0xb
Jun 1 10:02:06 localhost kernel: Code: 59 5e 5f c3 57 89 d7 56 31 f6 53 89 c3 8b 90 70 01 00 00 eb 03 46 89 ca 8b 0a 0f 18 01 90 8d 83 70 01 00 00 39 c2 75 ed 8b 43 04 <81> 78 7c 04 00 02 00 75 16 8b 83 cc 00 00 00 85 c0 74 0c 8b 80
Jun 1 10:02:06 localhost kernel: EIP: [check_tty_count+39/110] check_tty_count+0x27/0x6e SS:ESP 0068:cbec7f44
When I changed te ipaq_open code to only submit the read urb after the
control message succeeds, these disappear.
Whenever the usb_control_msg returns with ETIMEDOUT (-110), in both code
variants, when the device is disconnected we get:
Jun 1 20:23:55 localhost kernel: ------------[ cut here ]------------
Jun 1 20:23:55 localhost kernel: kernel BUG at kernel/workqueue.c:110!
Jun 1 20:23:55 localhost kernel: invalid opcode: 0000 [#1]
Jun 1 20:23:55 localhost kernel: Modules linked in: ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt ppp_generic slhc uhci_hcd ohci_hcd usbhid ipaq usbserial ehci_hcd usbcore tun 8139too mii sr_mod sbp2 scsi_mod ieee1394 psmouse ide_generic ide_cd cdrom genrtc ext3 jbd mbcache ide_disk generic via82cxxx ide_core evdev mousedev
Jun 1 20:23:55 localhost kernel: CPU: 0
Jun 1 20:23:55 localhost kernel: EIP: 0060:[queue_work+23/47] Not tainted VLI
Jun 1 20:23:55 localhost kernel: EFLAGS: 00010a93 (2.6.17-rc4 #4)
Jun 1 20:23:55 localhost kernel: EIP is at queue_work+0x17/0x2f
Jun 1 20:23:55 localhost kernel: eax: c383113c ebx: b13f29c0 ecx: 00000000 edx: c3831138
Jun 1 20:23:55 localhost kernel: esi: c44e8d60 edi: ca2f4814 ebp: 00000000 esp: c6bafeb8
Jun 1 20:23:55 localhost kernel: ds: 007b es: 007b ss: 0068
Jun 1 20:23:55 localhost kernel: Process khubd (pid: 1629, threadinfo=c6bae000 task=cbfd3a90)
Jun 1 20:23:55 localhost kernel: Stack: <0>c44e8d60 cc9bfad3 c3831000 ca2f4800 cc9bcb40 cc9bcb64 ca2f4814 cc9dd838
Jun 1 20:23:55 localhost kernel: ca2f4800 ca2f487c ca2f4814 b01fb254 ca2f4814 ca2f4814 00000000 cc9f0ba0
Jun 1 20:23:55 localhost kernel: b01fb419 ca2f4814 b01fac3d ca2f4814 ca2f485c ca2f4814 c5cc3858 00000000
Jun 1 20:23:55 localhost kernel: Call Trace:
Jun 1 20:23:55 localhost kernel: <cc9bfad3> usb_serial_disconnect+0x59/0xa1 [usbserial] <cc9dd838> usb_unbind_interface+0x36/0x6f [usbcore]
Jun 1 20:23:55 localhost kernel: <b01fb254> __device_release_driver+0x5c/0x72 <b01fb419> device_release_driver+0x18/0x26
Jun 1 20:23:55 localhost kernel: <b01fac3d> bus_remove_device+0x74/0x8c <b01fa0cc> device_del+0x39/0x65
Jun 1 20:23:55 localhost kernel: <cc9dcaa1> usb_disable_device+0x6a/0xd4 [usbcore] <cc9d9225> usb_disconnect+0x7c/0xc9 [usbcore]
Jun 1 20:23:55 localhost kernel: <cc9d9f3d> hub_thread+0x35b/0x9eb [usbcore] <b0123f84> autoremove_wake_function+0x0/0x3a
Jun 1 20:23:55 localhost kernel: <b0123f36> kthread+0x80/0xc1 <cc9d9be2> hub_thread+0x0/0x9eb [usbcore]
Jun 1 20:23:55 localhost kernel: <b0123f4a> kthread+0x94/0xc1 <b0123eb6> kthread+0x0/0xc1
Jun 1 20:23:55 localhost kernel: <b0101005> kernel_thread_helper+0x5/0xb
Jun 1 20:23:55 localhost kernel: Code: 89 d8 5b 5e 5f c3 89 d1 89 c2 a1 f4 71 32 b0 e9 86 ff ff ff 53 89 c3 0f ba 2a 00 19 c0 31 c9 85 c0 75 1c 8d 42 04 39 42 04 74 08 <0f> 0b 6e 00 64 61 27 b0 8b 03 e8 4a fc ff ff b9 01 00 00 00 5b
Jun 1 20:23:55 localhost kernel: EIP: [queue_work+23/47] queue_work+0x17/0x2f SS:ESP 0068:c6bafeb8
This seems to be 100% reproducible. I noticed that serial_open (in
usb-serial.c) sets port->tty = tty and tty->driver_data = port, but
doesn't set them back to NULL if the type->open() fails. Is that correct
?
Also, we have discovered that the slow response of the ipaq on connect
is actually largely caused by the control message retries, so we have
added a sleep at the start of ipaq_open.
The current patch we are testing (not yet ready for inclusion, since
it doesn't work correctly yet and it produces some output that is not
useful in general) is :
diff -urp linux-2.6.17-rc4/drivers/usb/serial/ipaq.c linux-2.6.17-rc4.test/drivers/usb/serial/ipaq.c
--- linux-2.6.17-rc4/drivers/usb/serial/ipaq.c 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.17-rc4.test/drivers/usb/serial/ipaq.c 2006-06-01 20:08:54.000000000 +0200
@@ -71,6 +71,8 @@
static __u16 product, vendor;
static int debug;
+static int connect_retries = KP_RETRIES;
+static int initial_wait;
/* Function prototypes for an ipaq */
static int ipaq_open (struct usb_serial_port *port, struct file *filp);
@@ -583,7 +585,7 @@ static int ipaq_open(struct usb_serial_p
struct ipaq_private *priv;
struct ipaq_packet *pkt;
int i, result = 0;
- int retries = KP_RETRIES;
+ int retries = connect_retries;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -647,12 +649,12 @@ static int ipaq_open(struct usb_serial_p
port->read_urb->transfer_buffer_length = URBDATA_SIZE;
port->bulk_out_size = port->write_urb->transfer_buffer_length = URBDATA_SIZE;
+ msleep(1000*initial_wait);
/* Start reading from the device */
usb_fill_bulk_urb(port->read_urb, serial->dev,
usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
ipaq_read_bulk_callback, port);
- result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result) {
err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
goto error;
@@ -669,12 +671,15 @@ static int ipaq_open(struct usb_serial_p
while (retries--) {
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21,
- 0x1, 0, NULL, 0, 100);
+ 0x1, 0, NULL, 0, 50);
if (result == 0) {
+ info("%s - submitted read urb to %s (serial:%s) after %d retries", __FUNCTION__,serial->dev->devpath,serial->dev->serial==NULL?"":serial->dev->serial,connect_retries-retries);
+ result = usb_submit_urb(port->read_urb, GFP_KERNEL);
return 0;
}
+ msleep(1000);
}
- err("%s - failed doing control urb, error %d", __FUNCTION__, result);
+ err("%s - failed doing control urb to %s (serial:%s), error %d", __FUNCTION__,serial->dev->devpath,serial->dev->serial==NULL?"":serial->dev->serial, result);
goto error;
enomem:
@@ -692,6 +697,7 @@ static void ipaq_close(struct usb_serial
struct ipaq_private *priv = usb_get_serial_port_data(port);
dbg("%s - port %d", __FUNCTION__, port->number);
+ info("%s - closed %s (serial:%s)", __FUNCTION__,port->serial->dev->devpath,port->serial->dev->serial==NULL?"":port->serial->dev->serial);
/*
* shut down bulk read and write
@@ -855,6 +861,7 @@ static void ipaq_write_bulk_callback(str
if (urb->status) {
dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
+ return;
}
spin_lock_irqsave(&write_list_lock, flags);
@@ -967,3 +974,9 @@ MODULE_PARM_DESC(vendor, "User specified
module_param(product, ushort, 0);
MODULE_PARM_DESC(product, "User specified USB idProduct");
+
+module_param(connect_retries, int, 0);
+MODULE_PARM_DESC(connect_retries, "Maximum number of connect retries (100ms each)");
+
+module_param(initial_wait, int, 0);
+MODULE_PARM_DESC(initial_wait, "Time to wait before attempting a connection (in seconds)");
diff -urp linux-2.6.17-rc4/drivers/usb/serial/usb-serial.c linux-2.6.17-rc4.test/drivers/usb/serial/usb-serial.c
--- linux-2.6.17-rc4/drivers/usb/serial/usb-serial.c 2006-05-30 19:01:16.000000000 +0200
+++ linux-2.6.17-rc4.test/drivers/usb/serial/usb-serial.c 2006-05-30 19:01:24.000000000 +0200
@@ -162,6 +162,8 @@ static void destroy_serial(struct kref *
}
}
+ flush_scheduled_work(); /* port->work */
+
usb_put_dev(serial->dev);
/* free up any memory that we allocated */
--
Frank Gevaerts [email protected]
fks bvba - Formal and Knowledge Systems http://www.fks.be/
Stationsstraat 108 Tel: ++32-(0)11-21 49 11
B-3570 ALKEN Fax: ++32-(0)11-22 04 19
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
