Frank van Maarseveen wrote:
> I have two machines named "porvoo" and "espoo". The first one
> has netconsole configured to send kernel messages to UDP port 514
> (a.k.a. syslog) on the other machine.
>
> Somewhere between 2.6.13.2 and 2.6.17-rc4 there is a regression causing
> the netconsole messages which originate from netfilter to be truncated
> right after the MAC addresses. For example, /var/log/messages on the
> sending machine says:
>
> May 31 09:28:11 porvoo kernel: IN=eth0 OUT= MAC=00:12:3f:85:9f:92:00:04:9a:a0:1d:d1:08:00 SRC=192.168.100.30 DST=172.17.1.113 LEN=60 TOS=0x00 PREC=0x00 TTL=54 ID=51496 DF PROTO=TCP SPT=50868 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0
>
> but netconsole messages captured in /var/log/messages on the receiving
> machine:
>
> May 31 09:28:11 porvoo IN=eth0 OUT=
> May 31 09:28:11 porvoo MAC=
> May 31 09:28:11 porvoo 00:
> May 31 09:28:11 porvoo 12:
> May 31 09:28:11 porvoo 3f:
> May 31 09:28:11 porvoo 85:
> May 31 09:28:11 porvoo 9f:
> May 31 09:28:11 porvoo 92:
> May 31 09:28:11 porvoo 00:
> May 31 09:28:11 porvoo 04:
> May 31 09:28:11 porvoo 9a:
> May 31 09:28:11 porvoo a0:
> May 31 09:28:11 porvoo 1d:
> May 31 09:28:11 porvoo d1:
> May 31 09:28:11 porvoo 08:
> May 31 09:28:11 porvoo 00
> May 31 09:49:06 espoo -- MARK --
>
> I ran a tcpdump on the sending machine to verify(?) what goes out but in
> that case the 2.6.17-rc4 kernel starts to report "protocol 0000 is buggy":
>
> May 31 11:00:49 porvoo kernel: device eth0 entered promiscuous mode
> May 31 11:03:31 porvoo kernel: IN=eth0 OUT= MAC=00:12:3f:85:9f:92:00:12:3f:85:17:52:08:00 SRC=172.17.1.64 DST=172.17.1.113 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=60618 DF PROTO=TCP SPT=34984 DPT=21212 WINDOW=5840 RES=0x00 SYN URGP=0
> May 31 11:03:31 porvoo kernel: protocol 0000 is buggy, dev eth0
> May 31 11:03:31 porvoo last message repeated 9 times
>
> the netconsole output captured on the receiving machine:
>
> May 31 11:00:49 porvoo device eth0 entered promiscuous mode
> May 31 11:03:31 porvoo protocol 0000 is buggy, dev eth0
> May 31 11:03:31 porvoo IN=eth0 OUT=
> May 31 11:03:31 porvoo protocol 0000 is buggy, dev eth0
> May 31 11:03:31 porvoo MAC=
> May 31 11:03:31 porvoo protocol 0000 is buggy, dev eth0
> May 31 11:03:31 porvoo 00:
> May 31 11:03:31 porvoo protocol 0000 is buggy, dev eth0
> May 31 11:03:31 porvoo 12:
> May 31 11:03:31 porvoo protocol 0000 is buggy, dev eth0
> May 31 11:03:31 porvoo 3f:
> May 31 11:03:31 porvoo protocol 0000 is buggy, dev eth0
> May 31 11:03:31 porvoo 85:
> May 31 11:03:31 porvoo protocol 0000 is buggy, dev eth0
> May 31 11:03:31 porvoo 9f:
> May 31 11:03:31 porvoo protocol 0000 is buggy, dev eth0
> May 31 11:03:31 porvoo 92:
> May 31 11:03:31 porvoo protocol 0000 is buggy, dev eth0
> May 31 11:03:31 porvoo 00:
> May 31 11:03:31 porvoo protocol 0000 is buggy, dev eth0
> May 31 11:03:31 porvoo 12:
> May 31 11:03:31 porvoo 3f:
> May 31 11:03:31 porvoo 85:
> May 31 11:03:31 porvoo 17:
> May 31 11:03:31 porvoo 52:
> May 31 11:03:31 porvoo 08:
> May 31 11:03:31 porvoo 00
>
> again 9 packets are missing and there are 9 "protocol 0000 is buggy"
> messages. Netfilter has almost everything configured. IPv6 is left out
> everywhere. Above has been produced using this rule on the netconsole
> sending machine:
>
> iptables -I INPUT -p tcp -s espoo --dport 21212 -j LOG
The message means that there was recursion and netpoll fell back
to dev_queue_xmit This patch should fix the "protocol is buggy"
messages, netpoll didn't set skb->nh.raw. Please try if it also
makes the other problem go away.
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index e8e05ce..7a4787c 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -329,7 +329,7 @@ void netpoll_send_udp(struct netpoll *np
udph->len = htons(udp_len);
udph->check = 0;
- iph = (struct iphdr *)skb_push(skb, sizeof(*iph));
+ skb->nh.iph = iph = (struct iphdr *)skb_push(skb, sizeof(*iph));
/* iph->version = 4; iph->ihl = 5; */
put_unaligned(0x45, (unsigned char *)iph);
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
