On Thu, 25 May 2006 11:19:05 +0300 İsmail Dönmez wrote:
> I am getting lots of warnings in MODPOST stage, not sure if this is known:
>
> WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to
> .init.text: from .text between 'cleanup_module' (at offset 0x1e82) and
> 'ip2_loadmain'
> WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to
> .init.text: from .text between 'cleanup_module' (at offset 0x1ea8) and
> 'ip2_loadmain'
> WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to
> .init.text: from .text between 'ip2_loadmain' (at offset 0x2109) and
> 'set_irq'
> WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to
> .init.text: from .text between 'ip2_loadmain' (at offset 0x21e7) and
> 'set_irq'
> WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to
> .init.text: from .text between 'ip2_loadmain' (at offset 0x22a6) and
> 'set_irq'
> WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to
> .init.text: from .text between 'ip2_loadmain' (at offset 0x253d) and
> 'set_irq'
> WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to
> .init.text: from .text between 'ip2_loadmain' (at offset 0x25c1) and
> 'set_irq'
Hm, I don't see all of those. However, Andrew has a patch for
(some of these) in -mm. It fixes all of the warnings that I get.
[snip]
> WARNING: drivers/scsi/megaraid/megaraid_mbox.o - Section mismatch:
> reference to .init.text: from .text between 'megaraid_probe_one' (at
> offset 0x161) and 'megaraid_detach_one'
> WARNING: drivers/scsi/wd7000.o - Section mismatch: reference to
> .init.text: from .text between 'wd7000_detect' (at offset 0xa81) and
> 'wd7000_release'
Patches for these 2 will follow shortly (to linux-scsi m-l).
> WARNING: drivers/scsi/qla1280.o - Section mismatch: reference to
> .init.data: from .text between 'qla1280_get_token' (at offset 0x2a16)
> and 'qla1280_probe_one'
> WARNING: drivers/scsi/qla1280.o - Section mismatch: reference to
> .init.data: from .text between 'qla1280_get_token' (at offset 0x2a3c)
> and 'qla1280_probe_one'
Weird, I don't get this one either, and I used your .config file.
However, I'll put some eyes on it.
---
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]