Summary of this patch:
[13/24] extend file size(ext3)
- If the flag is set to super block, i_blocks of disk inode
(ext3_inode) is filesystem-block unit, and i_blocks of VFS
inode is sector unit.
- If the flag is set to super block, max file size is set to
(FS blocksize) * (2^32 -1).
Signed-off-by: Takashi Sato [email protected]
---
diff -upNr -X linux-2.6.17-rc4/Documentation/dontdiff linux-2.6.17-rc4/fs/ext3/inode.c linux-2.6.17-rc4.tmp/fs/ext3/inode.c
--- linux-2.6.17-rc4/fs/ext3/inode.c 2006-05-25 16:33:29.706776397 +0900
+++ linux-2.6.17-rc4.tmp/fs/ext3/inode.c 2006-05-25 16:34:09.854236842 +0900
@@ -2630,8 +2630,13 @@ void ext3_read_inode(struct inode * inod
inode->i_blksize = PAGE_SIZE; /* This is the optimal IO size
* (for stat), not the fs block
* size */
- inode->i_blocks = le32_to_cpu(raw_inode->i_blocks);
ei->i_flags = le32_to_cpu(raw_inode->i_flags);
+ if (ei->i_flags & EXT3_HUGE_FILE_FL) {
+ inode->i_blocks = (blkcnt_t)le32_to_cpu(raw_inode->i_blocks)
+ << (inode->i_blkbits - EXT3_SECTOR_BITS);
+ } else {
+ inode->i_blocks = le32_to_cpu(raw_inode->i_blocks);
+ }
#ifdef EXT3_FRAGMENTS
ei->i_faddr = le32_to_cpu(raw_inode->i_faddr);
ei->i_frag_no = raw_inode->i_frag;
@@ -2726,6 +2731,7 @@ static int ext3_do_update_inode(handle_t
struct ext3_inode *raw_inode = ext3_raw_inode(iloc);
struct ext3_inode_info *ei = EXT3_I(inode);
struct buffer_head *bh = iloc->bh;
+ struct super_block *sb = inode->i_sb;
int err = 0, rc, block;
/* For fields not not tracking in the in-memory inode,
@@ -2763,9 +2769,30 @@ static int ext3_do_update_inode(handle_t
raw_inode->i_atime = cpu_to_le32(inode->i_atime.tv_sec);
raw_inode->i_ctime = cpu_to_le32(inode->i_ctime.tv_sec);
raw_inode->i_mtime = cpu_to_le32(inode->i_mtime.tv_sec);
- raw_inode->i_blocks = cpu_to_le32(inode->i_blocks);
- raw_inode->i_dtime = cpu_to_le32(ei->i_dtime);
raw_inode->i_flags = cpu_to_le32(ei->i_flags);
+
+ if (inode->i_blocks <= ~0U) {
+ raw_inode->i_flags &= ~EXT3_HUGE_FILE_FL;
+ raw_inode->i_blocks = cpu_to_le32(inode->i_blocks);
+ } else {
+ err = ext3_journal_get_write_access(handle,
+ EXT3_SB(sb)->s_sbh);
+ if (err)
+ goto out_brelse;
+ ext3_update_dynamic_rev(sb);
+ EXT3_SET_RO_COMPAT_FEATURE(sb,
+ EXT3_FEATURE_RO_COMPAT_HUGE_FILE);
+ sb->s_dirt = 1;
+ handle->h_sync = 1;
+ err = ext3_journal_dirty_metadata(handle,
+ EXT3_SB(sb)->s_sbh);
+ printk("ext3_do_update_inode: Now the file size is "
+ "more than 2TB on device (%s)!!\n", sb->s_id);
+ raw_inode->i_flags |= EXT3_HUGE_FILE_FL;
+ raw_inode->i_blocks = cpu_to_le32((inode->i_blocks)
+ >> (inode->i_blkbits - EXT3_SECTOR_BITS));
+ }
+ raw_inode->i_dtime = cpu_to_le32(ei->i_dtime);
#ifdef EXT3_FRAGMENTS
raw_inode->i_faddr = cpu_to_le32(ei->i_faddr);
raw_inode->i_frag = ei->i_frag_no;
diff -upNr -X linux-2.6.17-rc4/Documentation/dontdiff linux-2.6.17-rc4/fs/ext3/super.c linux-2.6.17-rc4.tmp/fs/ext3/super.c
--- linux-2.6.17-rc4/fs/ext3/super.c 2006-05-25 16:34:05.950916578 +0900
+++ linux-2.6.17-rc4.tmp/fs/ext3/super.c 2006-05-25 16:34:09.856189967 +0900
@@ -1297,14 +1297,21 @@ static void ext3_orphan_cleanup (struct
* block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks.
* We need to be 1 filesystem block less than the 2^32 sector limit.
*/
-static loff_t ext3_max_size(int bits)
+static loff_t ext3_max_size(int bits, struct super_block *sb)
{
loff_t res = EXT3_NDIR_BLOCKS;
/* This constant is calculated to be the largest file size for a
* dense, 4k-blocksize file such that the total number of
* sectors in the file, including data and all indirect blocks,
* does not exceed 2^32. */
- const loff_t upper_limit = 0x1ff7fffd000LL;
+ loff_t upper_limit;
+ if (sizeof(blkcnt_t) < sizeof(u64)) {
+ upper_limit = 0x1ff7fffd000LL;
+ }
+ /* With CONFIG_LSF on, file size is limited to blocksize*(4G-1) */
+ else {
+ upper_limit = (1LL << (bits + 32)) - (1LL << bits);
+ }
res += 1LL << (bits-2);
res += 1LL << (2*(bits-2));
@@ -1465,7 +1472,7 @@ static int ext3_fill_super (struct super
if (blocksize > PAGE_SIZE) {
printk(KERN_ERR "EXT3-fs: cannot mount filesystem with "
- "blocksize %u larger than PAGE_SIZE %u on %s\n",
+ "blocksize %u larger than PAGE_SIZE %lu on %s\n",
blocksize, PAGE_SIZE, sb->s_id);
goto failed_mount;
}
@@ -1508,7 +1515,7 @@ static int ext3_fill_super (struct super
}
}
- sb->s_maxbytes = ext3_max_size(sb->s_blocksize_bits);
+ sb->s_maxbytes = ext3_max_size(sb->s_blocksize_bits, sb);
if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV) {
sbi->s_inode_size = EXT3_GOOD_OLD_INODE_SIZE;
@@ -1699,6 +1706,18 @@ static int ext3_fill_super (struct super
*/
root = iget(sb, EXT3_ROOT_INO);
+
+ if (EXT3_HAS_RO_COMPAT_FEATURE(sb,
+ EXT3_FEATURE_RO_COMPAT_HUGE_FILE)) {
+ if (sizeof(root->i_blocks) < sizeof(u64)) {
+ if (!(sb->s_flags & MS_RDONLY)) {
+ printk(KERN_ERR "EXT3-fs: %s: Having huge file with "
+ "LSF off, you must mount filesystem "
+ "read-only.\n", sb->s_id);
+ goto failed_mount;
+ }
+ }
+ }
sb->s_root = d_alloc_root(root);
if (!sb->s_root) {
printk(KERN_ERR "EXT3-fs: get root inode failed\n");
diff -upNr -X linux-2.6.17-rc4/Documentation/dontdiff linux-2.6.17-rc4/include/linux/ext3_fs.h linux-2.6.17-rc4.tmp/include/linux/ext3_fs.h
--- linux-2.6.17-rc4/include/linux/ext3_fs.h 2006-05-25 16:34:05.951893140 +0900
+++ linux-2.6.17-rc4.tmp/include/linux/ext3_fs.h 2006-05-25 16:34:09.857166530 +0900
@@ -99,6 +99,7 @@ struct statfs;
#else
# define EXT3_BLOCK_SIZE_BITS(s) ((s)->s_log_block_size + 10)
#endif
+#define EXT3_SECTOR_BITS 9 /* log2(SECTOR_SIZE) */
#ifdef __KERNEL__
#define EXT3_ADDR_PER_BLOCK_BITS(s) (EXT3_SB(s)->s_addr_per_block_bits)
#define EXT3_INODE_SIZE(s) (EXT3_SB(s)->s_inode_size)
@@ -187,6 +188,7 @@ struct ext3_group_desc
#define EXT3_NOTAIL_FL 0x00008000 /* file tail should not be merged */
#define EXT3_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */
#define EXT3_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
+#define EXT3_HUGE_FILE_FL 0x00040000 /* Set to each huge file */
#define EXT3_RESERVED_FL 0x80000000 /* reserved for ext3 lib */
#define EXT3_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
@@ -558,6 +560,7 @@ static inline struct ext3_inode_info *EX
#define EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER 0x0001
#define EXT3_FEATURE_RO_COMPAT_LARGE_FILE 0x0002
#define EXT3_FEATURE_RO_COMPAT_BTREE_DIR 0x0004
+#define EXT3_FEATURE_RO_COMPAT_HUGE_FILE 0x0008
#define EXT3_FEATURE_INCOMPAT_COMPRESSION 0x0001
#define EXT3_FEATURE_INCOMPAT_FILETYPE 0x0002
@@ -573,8 +576,8 @@ static inline struct ext3_inode_info *EX
EXT3_FEATURE_INCOMPAT_HUGE_FS)
#define EXT3_FEATURE_RO_COMPAT_SUPP (EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER| \
EXT3_FEATURE_RO_COMPAT_LARGE_FILE| \
- EXT3_FEATURE_RO_COMPAT_BTREE_DIR)
-
+ EXT3_FEATURE_RO_COMPAT_BTREE_DIR| \
+ EXT3_FEATURE_RO_COMPAT_HUGE_FILE)
/*
* Default values for user and/or group using reserved blocks
*/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
