Change MC drivers from using CVS revision strings for their version number,
Now each driver has its own local string.
Remove some PCI dependencies from the core EDAC module.
Made the code 'struct device' centric instead of 'struct pci_dev'
Most of the code changes here are from a patch by Dave Jiang.
It may be best to eventually move the PCI-specific code into a separate source file.
Signed-off-by: Doug Thompson <[email protected]>
Index: linux-2.6.17-rc4/drivers/edac/edac_mc.h
===================================================================
--- linux-2.6.17-rc4.orig/drivers/edac/edac_mc.h 2006-05-15 15:50:33.000000000 -0600
+++ linux-2.6.17-rc4/drivers/edac/edac_mc.h 2006-05-15 16:01:36.000000000 -0600
@@ -24,7 +24,9 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/smp.h>
+#ifdef CONFIG_PCI
#include <linux/pci.h>
+#endif
#include <linux/time.h>
#include <linux/nmi.h>
#include <linux/rcupdate.h>
@@ -85,8 +87,16 @@
#define BIT(x) (1 << (x))
+#ifdef CONFIG_PCI
#define PCI_VEND_DEV(vend, dev) PCI_VENDOR_ID_ ## vend, \
PCI_DEVICE_ID_ ## vend ## _ ## dev
+#endif
+
+#if defined(CONFIG_X86) && defined(CONFIG_PCI)
+#define dev_name(dev) pci_name(to_pci_dev(dev))
+#else
+#define dev_name(dev) to_platform_device(dev)->name
+#endif
/* memory devices */
enum dev_type {
@@ -327,10 +337,10 @@
struct csrow_info *csrows;
/*
* FIXME - what about controllers on other busses? - IDs must be
- * unique. pdev pointer should be sufficiently unique, but
+ * unique. dev pointer should be sufficiently unique, but
* BUS:SLOT.FUNC numbers may not be unique.
*/
- struct pci_dev *pdev;
+ struct device *dev;
const char *mod_name;
const char *mod_ver;
const char *ctl_name;
@@ -353,6 +363,8 @@
struct completion kobj_complete;
};
+#ifdef CONFIG_PCI
+
/* write all or some bits in a byte-register*/
static inline void pci_write_bits8(struct pci_dev *pdev, int offset, u8 value,
u8 mask)
@@ -401,6 +413,8 @@
pci_write_config_dword(pdev, offset, value);
}
+#endif /* CONFIG_PCI */
+
#ifdef CONFIG_EDAC_DEBUG
void edac_mc_dump_channel(struct channel_info *chan);
void edac_mc_dump_mci(struct mem_ctl_info *mci);
@@ -408,7 +422,7 @@
#endif /* CONFIG_EDAC_DEBUG */
extern int edac_mc_add_mc(struct mem_ctl_info *mci);
-extern struct mem_ctl_info * edac_mc_del_mc(struct pci_dev *pdev);
+extern struct mem_ctl_info * edac_mc_del_mc(struct device *dev);
extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci,
unsigned long page);
extern void edac_mc_scrub_block(unsigned long page, unsigned long offset,
Index: linux-2.6.17-rc4/drivers/edac/amd76x_edac.c
===================================================================
--- linux-2.6.17-rc4.orig/drivers/edac/amd76x_edac.c 2006-05-15 15:50:32.000000000
-0600
+++ linux-2.6.17-rc4/drivers/edac/amd76x_edac.c 2006-05-15 16:01:36.000000000 -0600
@@ -20,6 +20,9 @@
#include <linux/slab.h>
#include "edac_mc.h"
+#define AMD76X_REVISION " Ver: 2.0.0 " __DATE__
+
+
#define amd76x_printk(level, fmt, arg...) \
edac_printk(level, "amd76x", fmt, ##arg)
@@ -102,15 +105,18 @@
static void amd76x_get_error_info(struct mem_ctl_info *mci,
struct amd76x_error_info *info)
{
- pci_read_config_dword(mci->pdev, AMD76X_ECC_MODE_STATUS,
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(mci->dev);
+ pci_read_config_dword(pdev, AMD76X_ECC_MODE_STATUS,
&info->ecc_mode_status);
if (info->ecc_mode_status & BIT(8))
- pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS,
+ pci_write_bits32(pdev, AMD76X_ECC_MODE_STATUS,
(u32) BIT(8), (u32) BIT(8));
if (info->ecc_mode_status & BIT(9))
- pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS,
+ pci_write_bits32(pdev, AMD76X_ECC_MODE_STATUS,
(u32) BIT(9), (u32) BIT(9));
}
@@ -211,13 +217,13 @@
}
debugf0("%s(): mci = %p\n", __func__, mci);
- mci->pdev = pdev;
+ mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_RDDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
mci->edac_cap = ems_mode ?
(EDAC_FLAG_EC | EDAC_FLAG_SECDED) : EDAC_FLAG_NONE;
mci->mod_name = EDAC_MOD_STR;
- mci->mod_ver = "$Revision: 1.4.2.5 $";
+ mci->mod_ver = AMD76X_REVISION;
mci->ctl_name = amd76x_devs[dev_idx].ctl_name;
mci->edac_check = amd76x_check;
mci->ctl_page_to_phys = NULL;
@@ -230,7 +236,7 @@
u32 dms;
/* find the DRAM Chip Select Base address and mask */
- pci_read_config_dword(mci->pdev,
+ pci_read_config_dword(pdev,
AMD76X_MEM_BASE_ADDR + (index * 4), &mba);
if (!(mba & BIT(0)))
@@ -238,8 +244,7 @@
mba_base = mba & 0xff800000UL;
mba_mask = ((mba & 0xff80) << 16) | 0x7fffffUL;
- pci_read_config_dword(mci->pdev, AMD76X_DRAM_MODE_STATUS,
- &dms);
+ pci_read_config_dword(pdev, AMD76X_DRAM_MODE_STATUS, &dms);
csrow->first_page = mba_base >> PAGE_SHIFT;
csrow->nr_pages = (mba_mask + 1) >> PAGE_SHIFT;
csrow->last_page = csrow->first_page + csrow->nr_pages - 1;
@@ -291,7 +296,7 @@
debugf0("%s()\n", __func__);
- if ((mci = edac_mc_del_mc(pdev)) == NULL)
+ if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
return;
edac_mc_free(mci);
Index: linux-2.6.17-rc4/drivers/edac/e752x_edac.c
===================================================================
--- linux-2.6.17-rc4.orig/drivers/edac/e752x_edac.c 2006-05-15 15:50:32.000000000
-0600
+++ linux-2.6.17-rc4/drivers/edac/e752x_edac.c 2006-05-15 16:01:36.000000000 -0600
@@ -25,6 +25,8 @@
#include <linux/slab.h>
#include "edac_mc.h"
+#define E752X_REVISION " Ver: 2.0.0 " __DATE__
+
static int force_function_unhide;
#define e752x_printk(level, fmt, arg...) \
@@ -819,8 +821,8 @@
EDAC_FLAG_S4ECD4ED;
/* FIXME - what if different memory types are in different csrows? */
mci->mod_name = EDAC_MOD_STR;
- mci->mod_ver = "$Revision: 1.5.2.11 $";
- mci->pdev = pdev;
+ mci->mod_ver = E752X_REVISION;
+ mci->dev = &pdev->dev;
debugf3("%s(): init pvt\n", __func__);
pvt = (struct e752x_pvt *) mci->pvt_info;
@@ -864,7 +866,7 @@
struct csrow_info *csrow = &mci->csrows[index];
mem_dev = (mem_dev == 2);
- pci_read_config_byte(mci->pdev, E752X_DRB + index, &value);
+ pci_read_config_byte(pdev, E752X_DRB + index, &value);
/* convert a 128 or 64 MiB DRB to a page size. */
cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
@@ -904,8 +906,7 @@
u8 row = 0;
for (index = 0; index < 8; index += 2) {
- pci_read_config_byte(mci->pdev, E752X_DRB + index,
- &value);
+ pci_read_config_byte(pdev, E752X_DRB + index, &value);
/* test if there is a dimm in this slot */
if (value == last) {
@@ -918,7 +919,7 @@
last = value;
/* test the next value to see if the dimm is
double sided */
- pci_read_config_byte(mci->pdev,
+ pci_read_config_byte(pdev,
E752X_DRB + index + 1,
&value);
pvt->map[index + 1] = (value == last) ?
@@ -935,18 +936,18 @@
}
/* set the map type. 1 = normal, 0 = reversed */
- pci_read_config_byte(mci->pdev, E752X_DRM, &stat8);
+ pci_read_config_byte(pdev, E752X_DRM, &stat8);
pvt->map_type = ((stat8 & 0x0f) > ((stat8 >> 4) & 0x0f));
mci->edac_cap |= EDAC_FLAG_NONE;
debugf3("%s(): tolm, remapbase, remaplimit\n", __func__);
/* load the top of low memory, remap base, and remap limit vars */
- pci_read_config_word(mci->pdev, E752X_TOLM, &pci_data);
+ pci_read_config_word(pdev, E752X_TOLM, &pci_data);
pvt->tolm = ((u32) pci_data) << 4;
- pci_read_config_word(mci->pdev, E752X_REMAPBASE, &pci_data);
+ pci_read_config_word(pdev, E752X_REMAPBASE, &pci_data);
pvt->remapbase = ((u32) pci_data) << 14;
- pci_read_config_word(mci->pdev, E752X_REMAPLIMIT, &pci_data);
+ pci_read_config_word(pdev, E752X_REMAPLIMIT, &pci_data);
pvt->remaplimit = ((u32) pci_data) << 14;
e752x_printk(KERN_INFO,
"tolm = %x, remapbase = %x, remaplimit = %x\n", pvt->tolm,
@@ -1015,7 +1016,7 @@
debugf0("%s()\n", __func__);
- if ((mci = edac_mc_del_mc(pdev)) == NULL)
+ if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
return;
pvt = (struct e752x_pvt *) mci->pvt_info;
Index: linux-2.6.17-rc4/drivers/edac/e7xxx_edac.c
===================================================================
--- linux-2.6.17-rc4.orig/drivers/edac/e7xxx_edac.c 2006-05-15 15:50:32.000000000
-0600
+++ linux-2.6.17-rc4/drivers/edac/e7xxx_edac.c 2006-05-15 16:01:36.000000000 -0600
@@ -30,6 +30,8 @@
#include <linux/slab.h>
#include "edac_mc.h"
+#define E7XXX_REVISION " Ver: 2.0.0 " __DATE__
+
#define e7xxx_printk(level, fmt, arg...) \
edac_printk(level, "e7xxx", fmt, ##arg)
@@ -373,8 +375,8 @@
EDAC_FLAG_S4ECD4ED;
/* FIXME - what if different memory types are in different csrows? */
mci->mod_name = EDAC_MOD_STR;
- mci->mod_ver = "$Revision: 1.5.2.9 $";
- mci->pdev = pdev;
+ mci->mod_ver = E7XXX_REVISION;
+ mci->dev = &pdev->dev;
debugf3("%s(): init pvt\n", __func__);
pvt = (struct e7xxx_pvt *) mci->pvt_info;
@@ -411,7 +413,7 @@
int mem_dev = (dra >> (index * 4 + 3)) & 0x1;
struct csrow_info *csrow = &mci->csrows[index];
- pci_read_config_byte(mci->pdev, E7XXX_DRB + index, &value);
+ pci_read_config_byte(pdev, E7XXX_DRB + index, &value);
/* convert a 64 or 32 MiB DRB to a page size. */
cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
@@ -448,11 +450,11 @@
debugf3("%s(): tolm, remapbase, remaplimit\n", __func__);
/* load the top of low memory, remap base, and remap limit vars */
- pci_read_config_word(mci->pdev, E7XXX_TOLM, &pci_data);
+ pci_read_config_word(pdev, E7XXX_TOLM, &pci_data);
pvt->tolm = ((u32) pci_data) << 4;
- pci_read_config_word(mci->pdev, E7XXX_REMAPBASE, &pci_data);
+ pci_read_config_word(pdev, E7XXX_REMAPBASE, &pci_data);
pvt->remapbase = ((u32) pci_data) << 14;
- pci_read_config_word(mci->pdev, E7XXX_REMAPLIMIT, &pci_data);
+ pci_read_config_word(pdev, E7XXX_REMAPLIMIT, &pci_data);
pvt->remaplimit = ((u32) pci_data) << 14;
e7xxx_printk(KERN_INFO,
"tolm = %x, remapbase = %x, remaplimit = %x\n", pvt->tolm,
@@ -498,7 +500,7 @@
debugf0("%s()\n", __func__);
- if ((mci = edac_mc_del_mc(pdev)) == NULL)
+ if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
return;
pvt = (struct e7xxx_pvt *) mci->pvt_info;
Index: linux-2.6.17-rc4/drivers/edac/edac_mc.c
===================================================================
--- linux-2.6.17-rc4.orig/drivers/edac/edac_mc.c 2006-05-15 15:50:33.000000000 -0600
+++ linux-2.6.17-rc4/drivers/edac/edac_mc.c 2006-05-15 16:01:36.000000000 -0600
@@ -54,16 +54,17 @@
static int panic_on_ue;
static int poll_msec = 1000;
-static int check_pci_parity = 0; /* default YES check PCI parity */
-static int panic_on_pci_parity; /* default no panic on PCI Parity */
-static atomic_t pci_parity_count = ATOMIC_INIT(0);
-
/* lock to memory controller's control array */
static DECLARE_MUTEX(mem_ctls_mutex);
static struct list_head mc_devices = LIST_HEAD_INIT(mc_devices);
static struct task_struct *edac_thread;
+#ifdef CONFIG_PCI
+static int check_pci_parity = 0; /* default YES check PCI parity */
+static int panic_on_pci_parity; /* default no panic on PCI Parity */
+static atomic_t pci_parity_count = ATOMIC_INIT(0);
+
/* Structure of the whitelist and blacklist arrays */
struct edac_pci_device_list {
unsigned int vendor; /* Vendor ID */
@@ -79,6 +80,7 @@
/* List of PCI devices (vendor-id:device-id) that should be scanned */
static struct edac_pci_device_list pci_whitelist[MAX_LISTED_PCI_DEVICES];
static int pci_whitelist_count ;
+#endif
/* START sysfs data and methods */
@@ -132,13 +134,17 @@
* /sys/devices/system/edac/pci
*/
static struct kobject edac_memctrl_kobj;
+#ifdef CONFIG_PCI
static struct kobject edac_pci_kobj;
+#endif
/* We use these to wait for the reference counts on edac_memctrl_kobj and
* edac_pci_kobj to reach 0.
*/
static struct completion edac_memctrl_kobj_complete;
+#ifdef CONFIG_PCI
static struct completion edac_pci_kobj_complete;
+#endif
/*
* /sys/devices/system/edac/mc;
@@ -324,6 +330,8 @@
#endif /* DISABLE_EDAC_SYSFS */
}
+#ifdef CONFIG_PCI
+
#ifndef DISABLE_EDAC_SYSFS
/*
@@ -624,6 +632,8 @@
#endif
}
+#endif /* CONFIG_PCI */
+
#ifndef DISABLE_EDAC_SYSFS
/* EDAC sysfs CSROW data structures and methods */
@@ -1132,7 +1142,7 @@
return err;
/* create a symlink for the device */
- err = sysfs_create_link(edac_mci_kobj, &mci->pdev->dev.kobj,
+ err = sysfs_create_link(edac_mci_kobj, &mci->dev->kobj,
EDAC_DEVICE_SYMLINK);
if (err)
@@ -1238,7 +1248,7 @@
debugf4("\tmci->edac_check = %p\n", mci->edac_check);
debugf3("\tmci->nr_csrows = %d, csrows = %p\n",
mci->nr_csrows, mci->csrows);
- debugf3("\tpdev = %p\n", mci->pdev);
+ debugf3("\tdev = %p\n", mci->dev);
debugf3("\tmod_name:ctl_name = %s:%s\n",
mci->mod_name, mci->ctl_name);
debugf3("\tpvt_info = %p\n\n", mci->pvt_info);
@@ -1363,7 +1373,7 @@
}
EXPORT_SYMBOL_GPL(edac_mc_free);
-static struct mem_ctl_info *find_mci_by_pdev(struct pci_dev *pdev)
+static struct mem_ctl_info *find_mci_by_dev(struct device *dev)
{
struct mem_ctl_info *mci;
struct list_head *item;
@@ -1373,7 +1383,7 @@
list_for_each(item, &mc_devices) {
mci = list_entry(item, struct mem_ctl_info, link);
- if (mci->pdev == pdev)
+ if (mci->dev == dev)
return mci;
}
@@ -1390,12 +1400,12 @@
mci->mc_idx = 0;
insert_before = &mc_devices;
} else {
- if (find_mci_by_pdev(mci->pdev)) {
+ if (find_mci_by_dev(mci->dev)) {
edac_printk(KERN_WARNING, EDAC_MC,
"%s (%s) %s %s already assigned %d\n",
- mci->pdev->dev.bus_id,
- pci_name(mci->pdev), mci->mod_name,
- mci->ctl_name, mci->mc_idx);
+ mci->dev->bus_id, dev_name(mci->dev),
+ mci->mod_name, mci->ctl_name,
+ mci->mc_idx);
return 1;
}
@@ -1486,8 +1496,8 @@
}
/* Report action taken */
- edac_mc_printk(mci, KERN_INFO, "Giving out device to %s %s: PCI %s\n",
- mci->mod_name, mci->ctl_name, pci_name(mci->pdev));
+ edac_mc_printk(mci, KERN_INFO, "Giving out device to %s %s: DEV %s\n",
+ mci->mod_name, mci->ctl_name, dev_name(mci->dev));
up(&mem_ctls_mutex);
return 0;
@@ -1504,18 +1514,18 @@
/**
* edac_mc_del_mc: Remove sysfs entries for specified mci structure and
* remove mci structure from global list
- * @pdev: Pointer to 'struct pci_dev' representing mci structure to remove.
+ * @pdev: Pointer to 'struct device' representing mci structure to remove.
*
* Return pointer to removed mci structure, or NULL if device not found.
*/
-struct mem_ctl_info * edac_mc_del_mc(struct pci_dev *pdev)
+struct mem_ctl_info * edac_mc_del_mc(struct device *dev)
{
struct mem_ctl_info *mci;
debugf0("MC: %s()\n", __func__);
down(&mem_ctls_mutex);
- if ((mci = find_mci_by_pdev(pdev)) == NULL) {
+ if ((mci = find_mci_by_dev(dev)) == NULL) {
up(&mem_ctls_mutex);
return NULL;
}
@@ -1524,8 +1534,8 @@
del_mc_from_global_list(mci);
up(&mem_ctls_mutex);
edac_printk(KERN_INFO, EDAC_MC,
- "Removed device %d for %s %s: PCI %s\n", mci->mc_idx,
- mci->mod_name, mci->ctl_name, pci_name(mci->pdev));
+ "Removed device %d for %s %s: DEV %s\n", mci->mc_idx,
+ mci->mod_name, mci->ctl_name, dev_name(mci->dev));
return mci;
}
EXPORT_SYMBOL_GPL(edac_mc_del_mc);
@@ -2051,6 +2061,7 @@
return -ENODEV;
}
+#ifdef CONFIG_PCI
/* Create the PCI parity sysfs entries */
if (edac_sysfs_pci_setup()) {
edac_sysfs_memctrl_teardown();
@@ -2058,6 +2069,7 @@
"EDAC PCI: Error initializing sysfs code\n");
return -ENODEV;
}
+#endif
/* create our kernel thread */
edac_thread = kthread_run(edac_kernel_thread, NULL, "kedac");
@@ -2065,7 +2077,9 @@
if (IS_ERR(edac_thread)) {
/* remove the sysfs entries */
edac_sysfs_memctrl_teardown();
+#ifdef CONFIG_PCI
edac_sysfs_pci_teardown();
+#endif
return PTR_ERR(edac_thread);
}
@@ -2083,7 +2097,9 @@
/* tear down the sysfs device */
edac_sysfs_memctrl_teardown();
+#ifdef CONFIG_PCI
edac_sysfs_pci_teardown();
+#endif
}
module_init(edac_mc_init);
@@ -2096,10 +2112,12 @@
module_param(panic_on_ue, int, 0644);
MODULE_PARM_DESC(panic_on_ue, "Panic on uncorrected error: 0=off 1=on");
+#ifdef CONFIG_PCI
module_param(check_pci_parity, int, 0644);
MODULE_PARM_DESC(check_pci_parity, "Check for PCI bus parity errors: 0=off 1=on");
module_param(panic_on_pci_parity, int, 0644);
MODULE_PARM_DESC(panic_on_pci_parity, "Panic on PCI Bus Parity error: 0=off 1=on");
+#endif
module_param(log_ue, int, 0644);
MODULE_PARM_DESC(log_ue, "Log uncorrectable error to console: 0=off 1=on");
module_param(log_ce, int, 0644);
Index: linux-2.6.17-rc4/drivers/edac/i82860_edac.c
===================================================================
--- linux-2.6.17-rc4.orig/drivers/edac/i82860_edac.c 2006-05-15 15:50:32.000000000
-0600
+++ linux-2.6.17-rc4/drivers/edac/i82860_edac.c 2006-05-15 16:01:36.000000000 -0600
@@ -17,6 +17,8 @@
#include <linux/slab.h>
#include "edac_mc.h"
+#define I82860_REVISION " Ver: 2.0.0 " __DATE__
+
#define i82860_printk(level, fmt, arg...) \
edac_printk(level, "i82860", fmt, ##arg)
@@ -63,17 +65,21 @@
static void i82860_get_error_info(struct mem_ctl_info *mci,
struct i82860_error_info *info)
{
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(mci->dev);
+
/*
* This is a mess because there is no atomic way to read all the
* registers at once and the registers can transition from CE being
* overwritten by UE.
*/
- pci_read_config_word(mci->pdev, I82860_ERRSTS, &info->errsts);
- pci_read_config_dword(mci->pdev, I82860_EAP, &info->eap);
- pci_read_config_word(mci->pdev, I82860_DERRCTL_STS, &info->derrsyn);
- pci_read_config_word(mci->pdev, I82860_ERRSTS, &info->errsts2);
+ pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts);
+ pci_read_config_dword(pdev, I82860_EAP, &info->eap);
+ pci_read_config_word(pdev, I82860_DERRCTL_STS, &info->derrsyn);
+ pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts2);
- pci_write_bits16(mci->pdev, I82860_ERRSTS, 0x0003, 0x0003);
+ pci_write_bits16(pdev, I82860_ERRSTS, 0x0003, 0x0003);
/*
* If the error is the same for both reads then the first set of reads
@@ -84,8 +90,8 @@
return;
if ((info->errsts ^ info->errsts2) & 0x0003) {
- pci_read_config_dword(mci->pdev, I82860_EAP, &info->eap);
- pci_read_config_word(mci->pdev, I82860_DERRCTL_STS,
+ pci_read_config_dword(pdev, I82860_EAP, &info->eap);
+ pci_read_config_word(pdev, I82860_DERRCTL_STS,
&info->derrsyn);
}
}
@@ -151,7 +157,7 @@
return -ENOMEM;
debugf3("%s(): init mci\n", __func__);
- mci->pdev = pdev;
+ mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
@@ -160,12 +166,12 @@
/* adjust FLAGS */
mci->mod_name = EDAC_MOD_STR;
- mci->mod_ver = "$Revision: 1.1.2.6 $";
+ mci->mod_ver = I82860_REVISION;
mci->ctl_name = i82860_devs[dev_idx].ctl_name;
mci->edac_check = i82860_check;
mci->ctl_page_to_phys = NULL;
- pci_read_config_word(mci->pdev, I82860_MCHCFG, &mchcfg_ddim);
+ pci_read_config_word(pdev, I82860_MCHCFG, &mchcfg_ddim);
mchcfg_ddim = mchcfg_ddim & 0x180;
/*
@@ -179,7 +185,7 @@
u32 cumul_size;
struct csrow_info *csrow = &mci->csrows[index];
- pci_read_config_word(mci->pdev, I82860_GBA + index * 2,
+ pci_read_config_word(pdev, I82860_GBA + index * 2,
&value);
cumul_size = (value & I82860_GBA_MASK) <<
@@ -240,7 +246,7 @@
debugf0("%s()\n", __func__);
- if ((mci = edac_mc_del_mc(pdev)) == NULL)
+ if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
return;
edac_mc_free(mci);
Index: linux-2.6.17-rc4/drivers/edac/i82875p_edac.c
===================================================================
--- linux-2.6.17-rc4.orig/drivers/edac/i82875p_edac.c 2006-05-15 15:50:32.000000000
-0600
+++ linux-2.6.17-rc4/drivers/edac/i82875p_edac.c 2006-05-15 16:01:36.000000000 -0600
@@ -21,6 +21,8 @@
#include <linux/slab.h>
#include "edac_mc.h"
+#define I82875P_REVISION " Ver: 2.0.0 " __DATE__
+
#define i82875p_printk(level, fmt, arg...) \
edac_printk(level, "i82875p", fmt, ##arg)
@@ -185,18 +187,22 @@
static void i82875p_get_error_info(struct mem_ctl_info *mci,
struct i82875p_error_info *info)
{
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(mci->dev);
+
/*
* This is a mess because there is no atomic way to read all the
* registers at once and the registers can transition from CE being
* overwritten by UE.
*/
- pci_read_config_word(mci->pdev, I82875P_ERRSTS, &info->errsts);
- pci_read_config_dword(mci->pdev, I82875P_EAP, &info->eap);
- pci_read_config_byte(mci->pdev, I82875P_DES, &info->des);
- pci_read_config_byte(mci->pdev, I82875P_DERRSYN, &info->derrsyn);
- pci_read_config_word(mci->pdev, I82875P_ERRSTS, &info->errsts2);
+ pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts);
+ pci_read_config_dword(pdev, I82875P_EAP, &info->eap);
+ pci_read_config_byte(pdev, I82875P_DES, &info->des);
+ pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn);
+ pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts2);
- pci_write_bits16(mci->pdev, I82875P_ERRSTS, 0x0081, 0x0081);
+ pci_write_bits16(pdev, I82875P_ERRSTS, 0x0081, 0x0081);
/*
* If the error is the same then we can for both reads then
@@ -208,9 +214,9 @@
return;
if ((info->errsts ^ info->errsts2) & 0x0081) {
- pci_read_config_dword(mci->pdev, I82875P_EAP, &info->eap);
- pci_read_config_byte(mci->pdev, I82875P_DES, &info->des);
- pci_read_config_byte(mci->pdev, I82875P_DERRSYN,
+ pci_read_config_dword(pdev, I82875P_EAP, &info->eap);
+ pci_read_config_byte(pdev, I82875P_DES, &info->des);
+ pci_read_config_byte(pdev, I82875P_DERRSYN,
&info->derrsyn);
}
}
@@ -337,14 +343,14 @@
}
debugf3("%s(): init mci\n", __func__);
- mci->pdev = pdev;
+ mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
mci->edac_cap = EDAC_FLAG_UNKNOWN;
/* adjust FLAGS */
mci->mod_name = EDAC_MOD_STR;
- mci->mod_ver = "$Revision: 1.5.2.11 $";
+ mci->mod_ver = I82875P_REVISION;
mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
mci->edac_check = i82875p_check;
mci->ctl_page_to_phys = NULL;
@@ -437,7 +443,7 @@
debugf0("%s()\n", __func__);
- if ((mci = edac_mc_del_mc(pdev)) == NULL)
+ if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
return;
pvt = (struct i82875p_pvt *) mci->pvt_info;
Index: linux-2.6.17-rc4/drivers/edac/r82600_edac.c
===================================================================
--- linux-2.6.17-rc4.orig/drivers/edac/r82600_edac.c 2006-05-15 15:50:32.000000000
-0600
+++ linux-2.6.17-rc4/drivers/edac/r82600_edac.c 2006-05-15 16:01:36.000000000 -0600
@@ -23,6 +23,8 @@
#include <linux/slab.h>
#include "edac_mc.h"
+#define R82600_REVSION " Ver: 2.0.0 " __DATE__
+
#define r82600_printk(level, fmt, arg...) \
edac_printk(level, "r82600", fmt, ##arg)
@@ -134,17 +136,20 @@
static void r82600_get_error_info (struct mem_ctl_info *mci,
struct r82600_error_info *info)
{
- pci_read_config_dword(mci->pdev, R82600_EAP, &info->eapr);
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(mci->dev);
+ pci_read_config_dword(pdev, R82600_EAP, &info->eapr);
if (info->eapr & BIT(0))
/* Clear error to allow next error to be reported [p.62] */
- pci_write_bits32(mci->pdev, R82600_EAP,
+ pci_write_bits32(pdev, R82600_EAP,
((u32) BIT(0) & (u32) BIT(1)),
((u32) BIT(0) & (u32) BIT(1)));
if (info->eapr & BIT(1))
/* Clear error to allow next error to be reported [p.62] */
- pci_write_bits32(mci->pdev, R82600_EAP,
+ pci_write_bits32(pdev, R82600_EAP,
((u32) BIT(0) & (u32) BIT(1)),
((u32) BIT(0) & (u32) BIT(1)));
}
@@ -232,7 +237,7 @@
}
debugf0("%s(): mci = %p\n", __func__, mci);
- mci->pdev = pdev;
+ mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
/* FIXME try to work out if the chip leads have been used for COM2
@@ -253,7 +258,7 @@
mci->edac_cap = EDAC_FLAG_NONE;
mci->mod_name = EDAC_MOD_STR;
- mci->mod_ver = "$Revision: 1.1.2.6 $";
+ mci->mod_ver = R82600_REVISION;
mci->ctl_name = "R82600";
mci->edac_check = r82600_check;
mci->ctl_page_to_phys = NULL;
@@ -265,7 +270,7 @@
u32 row_base;
/* find the DRAM Chip Select Base address and mask */
- pci_read_config_byte(mci->pdev, R82600_DRBA + index, &drbar);
+ pci_read_config_byte(pdev, R82600_DRBA + index, &drbar);
debugf1("MC%d: %s() Row=%d DRBA = %#0x\n", mci->mc_idx,
__func__, index, drbar);
@@ -309,7 +314,7 @@
if (disable_hardware_scrub) {
debugf3("%s(): Disabling Hardware Scrub (scrub on error)\n",
__func__);
- pci_write_bits32(mci->pdev, R82600_EAP, BIT(31), BIT(31));
+ pci_write_bits32(pdev, R82600_EAP, BIT(31), BIT(31));
}
debugf3("%s(): success\n", __func__);
@@ -338,7 +343,7 @@
debugf0("%s()\n", __func__);
- if ((mci = edac_mc_del_mc(pdev)) == NULL)
+ if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
return;
edac_mc_free(mci);
"If you think Education is expensive, just try Ignorance"
"Don't tell people HOW to do things, tell them WHAT you
want and they will surprise you with their ingenuity."
Gen George Patton
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
