Re: [PATCH 2/2] list.h doc: change "counter" to "control"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 19 May 2006 12:10:12 -0500 Scott Preece wrote:

> "cursor" is what I usually use in my own code...
> 
> On 5/19/06, Andrew Morton <[email protected]> wrote:
> >
> > "cursor"

OK, here's a patch to replace the other one.


From: Randy Dunlap <[email protected]>

Use loop "cursor" instead of loop "counter" for list iterator
descriptions.  They are not counters, they are cursors or
pointers or positions or locations.

Signed-off-by: Randy Dunlap <[email protected]>
---
 include/linux/list.h |   52 +++++++++++++++++++++++++--------------------------
 1 files changed, 26 insertions(+), 26 deletions(-)

--- linux-2617-rc4g6.orig/include/linux/list.h
+++ linux-2617-rc4g6/include/linux/list.h
@@ -328,7 +328,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each	-	iterate over a list
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
  */
 #define list_for_each(pos, head) \
@@ -337,7 +337,7 @@ static inline void list_splice_init(stru
 
 /**
  * __list_for_each	-	iterate over a list
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
  *
  * This variant differs from list_for_each() in that it's the
@@ -350,7 +350,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_prev	-	iterate over a list backwards
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
  */
 #define list_for_each_prev(pos, head) \
@@ -359,7 +359,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_safe - iterate over a list safe against removal of list entry
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @n:		another &struct list_head to use as temporary storage
  * @head:	the head for your list.
  */
@@ -369,7 +369,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry	-	iterate over list of given type
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  */
@@ -380,7 +380,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_reverse - iterate backwards over list of given type.
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  */
@@ -402,7 +402,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_continue - continue iteration over list of given type
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  *
@@ -416,7 +416,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_from - iterate over list of given type from the current point
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  *
@@ -428,7 +428,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
@@ -441,7 +441,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_safe_continue
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
@@ -457,7 +457,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_safe_from
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
@@ -472,7 +472,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_safe_reverse
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
@@ -488,7 +488,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_rcu	-	iterate over an rcu-protected list
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
  *
  * This list-traversal primitive may safely run concurrently with
@@ -507,7 +507,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_safe_rcu
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @n:		another &struct list_head to use as temporary storage
  * @head:	the head for your list.
  *
@@ -524,7 +524,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_entry_rcu	-	iterate over rcu list of given type
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  *
@@ -541,7 +541,7 @@ static inline void list_splice_init(stru
 
 /**
  * list_for_each_continue_rcu
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
  *
  * Iterate over an rcu-protected list, continuing after current point.
@@ -791,8 +791,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry	- iterate over list of given type
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the hlist_node within the struct.
  */
@@ -804,8 +804,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry_continue - iterate over a hlist continuing after current point
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
  * @member:	the name of the hlist_node within the struct.
  */
 #define hlist_for_each_entry_continue(tpos, pos, member)		 \
@@ -816,8 +816,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry_from - iterate over a hlist continuing from current point
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
  * @member:	the name of the hlist_node within the struct.
  */
 #define hlist_for_each_entry_from(tpos, pos, member)			 \
@@ -827,8 +827,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
  * @n:		another &struct hlist_node to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the hlist_node within the struct.
@@ -841,8 +841,8 @@ static inline void hlist_add_after_rcu(s
 
 /**
  * hlist_for_each_entry_rcu - iterate over rcu list of given type
- * @tpos:	the type * to use as a loop counter.
- * @pos:	the &struct hlist_node to use as a loop counter.
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the hlist_node within the struct.
  *

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux