On Fri, 12 May 2006 22:24:37 +0900, Tejun Heo wrote:
> ahci: new EH, irq-pio, NCQ, hotplug
Should suspend-to-RAM work now on AHCI? It produces lots of messages now
but does not work either now.
# ls
ata1.00: exception Emask 0x10 SAct 0x1 SEra 0x4050000 action 0x3 frozen
ata1.00 tag 0 cmd 0x60 Emask 0x14 stat 0x40 err 0x0 (ATA bus error)
ata1: soft resetting port
ata1: softreset failed (1st FIS failed)
ata1: softreset failed, retrying in 5 secs
ata1: hard resettinq port
ata1: port is slow to respond, please be patient
ata1: port failed to respond (30 secs)
ata1: COMRESET failed (device not ready)
ata1: hardreset failed, retrying in 5 secs
ata1: hard resettinq port
ata1: port is slow to respond, please be patient
ata1: port failed to respond (30 secs)
ata1: COMRESET failed (device not ready)
ata1: reset failed, giving up
ata1.00: disabled
ata1: EH complete
sd 0:0:0:0: SCSI error: return code = 0x40000
...
It produces lots of more SCSI errors (I did not want to write all those
down...) but no ata1-errors any more.
Michael
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]