Re: [RFT] major libata update

On 5/15/06, Jeff Garzik <[email protected]> wrote:

Avuton Olrich wrote:
> On 5/15/06, Jeff Garzik <[email protected]> wrote:
>> * sata_sil and ata_piix also need healthy re-testing of all basic
>> functionality.
>
> I'm testing it right now, but with 2.6.17-rc4-git2 I was getting:

Testing what?  sata_sil?  Please provide full dmesg, there's a lot of
missing information.


More followup, it did finally error out on me:

Not sure if it helps any, but this is a sata2 disk with a sata
interface. This is rc4-git2 with the libata patch from the beginning
of this thread, using sata_sil.

dmesg:
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: limiting speed to UDMA/66
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/66
ata1: EH complete
ata1.00: limiting speed to UDMA/44
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/44
ata1: EH complete
ata1.00: limiting speed to UDMA/33
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
sd 0:0:0:0: SCSI error: return code = 0x8000002
sda: Current: sense key=0xb
   ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 703661647
ata1: EH complete
ata1.00: limiting speed to UDMA/25
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/25
ata1: EH complete
NETDEV WATCHDOG: eth2: transmit timed out
ata1.00: limiting speed to UDMA/16
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/16
ata1: EH complete
ata1.00: limiting speed to PIO4
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for PIO4
ata1: EH complete
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
 diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
 Flags; bus-master 1, dirty 18790(6) current 18806(6)
 Transmit list 37e3c5c0 vs. f7e3c5c0.
 0: @f7e3c200  length 8000002a status 0000002a
 1: @f7e3c2a0  length 8000002a status 0000002a
 2: @f7e3c340  length 8000002a status 0000002a
 3: @f7e3c3e0  length 8000002a status 0000002a
 4: @f7e3c480  length 8000002a status 8000002a
 5: @f7e3c520  length 8000002a status 8000002a
 6: @f7e3c5c0  length 8000005f status 0000005f
 7: @f7e3c660  length 8000005f status 0000005f
 8: @f7e3c700  length 8000002a status 0000002a
 9: @f7e3c7a0  length 8000002a status 0000002a
 10: @f7e3c840  length 8000002a status 0000002a
 11: @f7e3c8e0  length 8000002a status 0000002a
 12: @f7e3c980  length 8000002a status 0000002a
 13: @f7e3ca20  length 8000002a status 0000002a
 14: @f7e3cac0  length 8000002a status 0000002a
 15: @f7e3cb60  length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
 diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
 Flags; bus-master 1, dirty 18790(6) current 18806(6)
 Transmit list 37e3c5c0 vs. f7e3c5c0.
 0: @f7e3c200  length 8000002a status 0000002a
 1: @f7e3c2a0  length 8000002a status 0000002a
 2: @f7e3c340  length 8000002a status 0000002a
 3: @f7e3c3e0  length 8000002a status 0000002a
 4: @f7e3c480  length 8000002a status 8000002a
 5: @f7e3c520  length 8000002a status 8000002a
 6: @f7e3c5c0  length 8000005f status 0000005f
 7: @f7e3c660  length 8000005f status 0000005f
 8: @f7e3c700  length 8000002a status 0000002a
 9: @f7e3c7a0  length 8000002a status 0000002a
 10: @f7e3c840  length 8000002a status 0000002a
 11: @f7e3c8e0  length 8000002a status 0000002a
 12: @f7e3c980  length 8000002a status 0000002a
 13: @f7e3ca20  length 8000002a status 0000002a
 14: @f7e3cac0  length 8000002a status 0000002a
 15: @f7e3cb60  length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
 diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
 Flags; bus-master 1, dirty 18790(6) current 18806(6)
 Transmit list 37e3c5c0 vs. f7e3c5c0.
 0: @f7e3c200  length 8000002a status 0000002a
 1: @f7e3c2a0  length 8000002a status 0000002a
 2: @f7e3c340  length 8000002a status 0000002a
 3: @f7e3c3e0  length 8000002a status 0000002a
 4: @f7e3c480  length 8000002a status 8000002a
 5: @f7e3c520  length 8000002a status 8000002a
 6: @f7e3c5c0  length 8000005f status 0000005f
 7: @f7e3c660  length 8000005f status 0000005f
 8: @f7e3c700  length 8000002a status 0000002a
 9: @f7e3c7a0  length 8000002a status 0000002a
 10: @f7e3c840  length 8000002a status 0000002a
 11: @f7e3c8e0  length 8000002a status 0000002a
 12: @f7e3c980  length 8000002a status 0000002a
 13: @f7e3ca20  length 8000002a status 0000002a
 14: @f7e3cac0  length 8000002a status 0000002a
 15: @f7e3cb60  length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
 diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
 Flags; bus-master 1, dirty 18790(6) current 18806(6)
 Transmit list 37e3c5c0 vs. f7e3c5c0.
 0: @f7e3c200  length 8000002a status 0000002a
 1: @f7e3c2a0  length 8000002a status 0000002a
 2: @f7e3c340  length 8000002a status 0000002a
 3: @f7e3c3e0  length 8000002a status 0000002a
 4: @f7e3c480  length 8000002a status 8000002a
 5: @f7e3c520  length 8000002a status 8000002a
 6: @f7e3c5c0  length 8000005f status 0000005f
 7: @f7e3c660  length 8000005f status 0000005f
 8: @f7e3c700  length 8000002a status 0000002a
 9: @f7e3c7a0  length 8000002a status 0000002a
 10: @f7e3c840  length 8000002a status 0000002a
 11: @f7e3c8e0  length 8000002a status 0000002a
 12: @f7e3c980  length 8000002a status 0000002a
 13: @f7e3ca20  length 8000002a status 0000002a
 14: @f7e3cac0  length 8000002a status 0000002a
 15: @f7e3cb60  length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
 diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
 Flags; bus-master 1, dirty 18790(6) current 18806(6)
 Transmit list 37e3c5c0 vs. f7e3c5c0.
 0: @f7e3c200  length 8000002a status 0000002a
 1: @f7e3c2a0  length 8000002a status 0000002a
 2: @f7e3c340  length 8000002a status 0000002a
 3: @f7e3c3e0  length 8000002a status 0000002a
 4: @f7e3c480  length 8000002a status 8000002a
 5: @f7e3c520  length 8000002a status 8000002a
 6: @f7e3c5c0  length 8000005f status 0000005f
 7: @f7e3c660  length 8000005f status 0000005f
 8: @f7e3c700  length 8000002a status 0000002a
 9: @f7e3c7a0  length 8000002a status 0000002a
 10: @f7e3c840  length 8000002a status 0000002a
 11: @f7e3c8e0  length 8000002a status 0000002a
 12: @f7e3c980  length 8000002a status 0000002a
 13: @f7e3ca20  length 8000002a status 0000002a
 14: @f7e3cac0  length 8000002a status 0000002a
 15: @f7e3cb60  length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
 diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
 Flags; bus-master 1, dirty 18790(6) current 18806(6)
 Transmit list 37e3c5c0 vs. f7e3c5c0.
 0: @f7e3c200  length 8000002a status 0000002a
 1: @f7e3c2a0  length 8000002a status 0000002a
 2: @f7e3c340  length 8000002a status 0000002a
 3: @f7e3c3e0  length 8000002a status 0000002a
 4: @f7e3c480  length 8000002a status 8000002a
 5: @f7e3c520  length 8000002a status 8000002a
 6: @f7e3c5c0  length 8000005f status 0000005f
 7: @f7e3c660  length 8000005f status 0000005f
 8: @f7e3c700  length 8000002a status 0000002a
 9: @f7e3c7a0  length 8000002a status 0000002a
 10: @f7e3c840  length 8000002a status 0000002a
 11: @f7e3c8e0  length 8000002a status 0000002a
 12: @f7e3c980  length 8000002a status 0000002a
 13: @f7e3ca20  length 8000002a status 0000002a
 14: @f7e3cac0  length 8000002a status 0000002a
 15: @f7e3cb60  length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.

lspci -vvv:
01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112
[SATALink/SATARaid] Serial ATA Controller (rev 01)
       Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium

TAbort- <TAbort- <MAbort- >SERR- <PERR-

       Latency: 32, Cache Line Size 08
       Interrupt: pin A routed to IRQ 19
       Region 0: I/O ports at 9c00 [size=8]
       Region 1: I/O ports at a000 [size=4]
       Region 2: I/O ports at a400 [size=8]
       Region 3: I/O ports at a800 [size=4]
       Region 4: I/O ports at ac00 [size=16]
       Region 5: Memory at e5006000 (32-bit, non-prefetchable)
[size=512]
       [virtual] Expansion ROM at e6800000 [disabled] [size=512K]
       Capabilities: [60] Power Management version 2
               Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=2 PME-

--
avuton
--
Anyone who quotes me in their sig is an idiot. -- Rusty Russell.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Follow-Ups:
- Re: [RFT] major libata update
  - From: Tejun Heo <[email protected]>
- Re: [RFT] major libata update
  - From: Jeff Garzik <[email protected]>

References:
- [RFT] major libata update
  - From: Jeff Garzik <[email protected]>
- Re: [RFT] major libata update
  - From: "Avuton Olrich" <[email protected]>
- Re: [RFT] major libata update
  - From: Jeff Garzik <[email protected]>

Prev by Date: Re: Panic in ipt_do_table with 2.6.16.13-xen
Next by Date: RE: GPL and NON GPL version modules
Previous by thread: Re: [RFT] major libata update
Next by thread: Re: [RFT] major libata update
Index(es):
- Date
- Thread

[Index of Archives] [Kernel Newbies] [Netfilter] [Bugtraq] [Photo] [Stuff] [Gimp] [Yosemite News] [MIPS Linux] [ARM Linux] [Linux Security] [Linux RAID] [Video 4 Linux] [Linux for the blind] [Linux Resources]