Here's another attempt .
- Reworked all the very long lines in that block (this drivers full of them though)
- Returns an error in three places that it didn't before.
- Properly clean up after a scsi_add_host() failure .
Signed-Off-By: Daniel Walker <[email protected]>
Index: linux-2.6.16/drivers/scsi/BusLogic.c
===================================================================
--- linux-2.6.16.orig/drivers/scsi/BusLogic.c
+++ linux-2.6.16/drivers/scsi/BusLogic.c
@@ -2177,6 +2177,7 @@ static int __init BusLogic_init(void)
{
int BusLogicHostAdapterCount = 0, DriverOptionsIndex = 0, ProbeIndex;
struct BusLogic_HostAdapter *PrototypeHostAdapter;
+ int ret = 0;
#ifdef MODULE
if (BusLogic)
@@ -2282,26 +2283,50 @@ static int __init BusLogic_init(void)
Create the Initial CCBs, Initialize the Host Adapter, and finally
perform Target Device Inquiry.
*/
- if (BusLogic_ReadHostAdapterConfiguration(HostAdapter) &&
- BusLogic_ReportHostAdapterConfiguration(HostAdapter) && BusLogic_AcquireResources(HostAdapter) && BusLogic_CreateInitialCCBs(HostAdapter) && BusLogic_InitializeHostAdapter(HostAdapter) && BusLogic_TargetDeviceInquiry(HostAdapter)) {
+ if (BusLogic_ReadHostAdapterConfiguration(HostAdapter) &&
+ BusLogic_ReportHostAdapterConfiguration(HostAdapter) &&
+ BusLogic_AcquireResources(HostAdapter) &&
+ BusLogic_CreateInitialCCBs(HostAdapter) &&
+ BusLogic_InitializeHostAdapter(HostAdapter) &&
+ BusLogic_TargetDeviceInquiry(HostAdapter)) {
/*
Initialization has been completed successfully. Release and
re-register usage of the I/O Address range so that the Model
Name of the Host Adapter will appear, and initialize the SCSI
Host structure.
*/
- release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
- if (!request_region(HostAdapter->IO_Address, HostAdapter->AddressCount, HostAdapter->FullModelName)) {
- printk(KERN_WARNING "BusLogic: Release and re-register of " "port 0x%04lx failed \n", (unsigned long) HostAdapter->IO_Address);
+ release_region(HostAdapter->IO_Address,
+ HostAdapter->AddressCount);
+ if (!request_region(HostAdapter->IO_Address,
+ HostAdapter->AddressCount,
+ HostAdapter->FullModelName)) {
+ printk(KERN_WARNING
+ "BusLogic: Release and re-register of "
+ "port 0x%04lx failed \n",
+ (unsigned long)HostAdapter->IO_Address);
BusLogic_DestroyCCBs(HostAdapter);
BusLogic_ReleaseResources(HostAdapter);
list_del(&HostAdapter->host_list);
scsi_host_put(Host);
+ ret = -ENOMEM;
} else {
- BusLogic_InitializeHostStructure(HostAdapter, Host);
- scsi_add_host(Host, HostAdapter->PCI_Device ? &HostAdapter->PCI_Device->dev : NULL);
- scsi_scan_host(Host);
- BusLogicHostAdapterCount++;
+ BusLogic_InitializeHostStructure(HostAdapter,
+ Host);
+ if (scsi_add_host(Host, HostAdapter->PCI_Device
+ ? &HostAdapter->PCI_Device->dev
+ : NULL)) {
+ printk(KERN_WARNING
+ "BusLogic: scsi_add_host()"
+ "failed!\n");
+ BusLogic_DestroyCCBs(HostAdapter);
+ BusLogic_ReleaseResources(HostAdapter);
+ list_del(&HostAdapter->host_list);
+ scsi_host_put(Host);
+ ret = -ENODEV;
+ } else {
+ scsi_scan_host(Host);
+ BusLogicHostAdapterCount++;
+ }
}
} else {
/*
@@ -2316,12 +2341,13 @@ static int __init BusLogic_init(void)
BusLogic_ReleaseResources(HostAdapter);
list_del(&HostAdapter->host_list);
scsi_host_put(Host);
+ ret = -ENODEV;
}
}
kfree(PrototypeHostAdapter);
kfree(BusLogic_ProbeInfoList);
BusLogic_ProbeInfoList = NULL;
- return 0;
+ return ret;
}
@@ -2955,6 +2981,7 @@ static int BusLogic_QueueCommand(struct
}
+#if 0
/*
BusLogic_AbortCommand aborts Command if possible.
*/
@@ -3025,6 +3052,7 @@ static int BusLogic_AbortCommand(struct
return SUCCESS;
}
+#endif
/*
BusLogic_ResetHostAdapter resets Host Adapter if possible, marking all
currently executing SCSI Commands as having been Reset.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
