Hi Alan,
Le Mon, 08 May 2006 17:06:40 +0100, Alan Cox a écrit :
> I've posted a new patch versus 2.6.17-rc3 up at the usual location.
>
> http://zeniv.linux.org.uk/~alan/IDE
>
Aren't there a bug in via cable detect ?
The via ide driver do
pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
for (i = 24; i >= 0; i -= 8)
if (((u >> i) & 0x10) ||
(((u >> i) & 0x20) &&
(((u >> i) & 7) < 6))) {
/* BIOS 80-wire bit or
* UDMA w/ < 60ns/cycle
*/
vdev->via_80w |= (1 << (1 - (i >> 4)));
}
80w = (vdev->via_80w >> hwif->channel) & 1;
upper bit are for channel 0 and lower bit for channel 1.
the pata driver do
pci_read_config_dword(pdev, 0x50, &ata66);
80w = ata66 & (0x1010 << (16 * ap->hard_port_no))
upper bit are for channel 1 and lower bit for channel 0.
at boot VIA_UDMA_TIMING is 0xf1f1e6e6 for a 80w cable on channel 0 and 40w
cable on channel 1.
Pata driver set my UDMA100 disk at UDMA33.
Matthieu.
PS : any idea in order to allow to work my cdrw drive, that don't return
interrupt when setting xfermode ?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
