Re: Generic SATA driver which works with Marvell SATA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?

A: No.
Q: Should I leave quotations after my reply?

On Thu, May 04, 2006 at 07:33:45PM +0530, Yogesh Pahilwan wrote:
> Even I tried loading sd_mod scsi disk driver; I am not able to see any SATA
> disks.
> 
> When I cat /proc/scsi/scsi it shows:
>  
> Attached devices:
> 
> I believe there must be some low level driver for the SATA devices (eg:
> mv_sata for Marvel SATA) which allows sd_mod to expose them as a scsi
> devices?


Yes. Oh, you meant a Marvell SATA controller? That's quite different
from a SATA disk. Just use sata_mv.

> I need a generic SATA driver to be used as replace of (eg: mv_sata) driver.

There is no such thing. The only driver that comes close is the AHCI
driver, but that needs AHCI compatible hardware. In your case: use
sata_mv, it should work fine. If not, see below.

> Please suggest.

1) Upgrade to the latest kernel (2.6.16.13 or 2.6.17-git9)
2) Try to recreate your problem
3) If it persists, read REPORTING-BUGS in your kernel tree and send in
   a bug report to the appropriate mailing list (linux-ide will do).


Erik

-- 
+-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux