sdio - ocr confusions

[Maximus <john.maximus@gmail.com>]

Hi,
 im trying to develop and sdio driver modifying the existing SD card driver.
 Im using an OMAP processor and a Wifi SDIO Card.

 I have send CMD 5 to get the OCR.

 i do get the EOC Status bit set.

 I do get the response resp[0] => 0x10fff000   (Contents of RSP6 & RSP7)


 According to this -> ocr => 0xfff000 (right most 24 bits)
                               mem present => 0
                               No of IO functions => 1

 I am using a Wifi SDIO Card - am not sure if these values are correct?.

 Am i doing something wrong here?


 I understand from the SDIO specs that only one of the bits (0-24) must be set.

 How do u interpreset an ocr of 0xfff000 ?.



 #define MMC_RSP_R4  (MMC_RSP_SHORT|MMC_RSP_CRC)
 #define SDIO_IO_SEND_OP_COND   (5)

   cmd.opcode = SDIO_IO_SEND_OP_COND ;
   cmd.arg = 0;
   cards.flags = MMC_RSP_R4

 Is this wrong?


Regards,
Jo

MMC1: set_ios: clock 0Hz busmode 1 powermode 0 Vdd 0.00
MMC1: set_ios: clock 0Hz busmode 1 powermode 0 Vdd 0.00
MMC1: set_ios: clock 400000Hz busmode 1 powermode 1 Vdd 0.21
MMC1: set_ios: clock 400000Hz busmode 1 powermode 1 Vdd 0.21
MMC1: set_ios: clock 400000Hz busmode 1 powermode 2 Vdd 0.21
MMC1: set_ios: clock 400000Hz busmode 1 powermode 2 Vdd 0.21

MMC: starting cmd 05 arg 00000000 flags 00000009
MMC1: CMD5, argument 0x00000000, 32-bit response, CRC
MMC IRQ 0001 (CMD 5): EOC
MMC1: Response 10fff000
MMC1: End request, err 0
MMC: req done (05): 0: 10fff000 00000000 00000000 00000000
 MC1: set_ios: clock 0Hz busmode 1 powermode 0 Vdd 0.00
MMC1: set_ios: clock 0Hz busmode 1 powermode 0 Vdd 0.00
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/