PATCH (RFC): Rework the 8250 console fix

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Russell got various bits of mail showing the 8250 console fix broke some
setups with the assumptions it made. Based on this suggestion that we
actually need to just do the locking I've prepared an alternative
patch. 

The patch does one thing a little oddly. If an oops is in progress it
only attempts to take the port lock and continues regardless. In that
situation the oops will hit the console but things may be a bit odd
thereafter. Getting the oops out seems to be the important thing to do
in that situation.

There are two questions that I think make this an RFC not a final patch

1.	Should this be pushed up into serial/serial_core.c for all chips.

2.	Is the use of local_irq_save/spin_trylock spin_unlock_irqrestore
going to break any platforms that do weird stuff or do we need a
spin_trylock_irqsave ?


Alan

(no signed off by as it isn't yet appropriate to merge.. and if I don't
sign it off nobody can jump the gun 8))

--- drivers/serial/8250.c~	2006-05-02 14:28:05.430397240 +0100
+++ drivers/serial/8250.c	2006-05-02 14:28:05.430397240 +0100
@@ -2201,7 +2201,18 @@
 {
 	struct uart_8250_port *up = &serial8250_ports[co->index];
 	unsigned int ier;
+	unsigned long flags;
+	int locked = 1;
 
+	if (unlikely(oops_in_progress)) {
+		/* We want our private lock to be ignored during an oops. This
+		   might cause a serial console stall afterwards but the oops data
+		   is the critical information to get out */
+		local_irq_save(flags);
+		locked = spin_trylock(&up->port.lock);
+	} else
+		spin_lock_irqsave(&up->port.lock, flags);
+		
 	touch_nmi_watchdog();
 
 	/*
@@ -2221,8 +2232,12 @@
 	 *	and restore the IER
 	 */
 	wait_for_xmitr(up, BOTH_EMPTY);
-	up->ier |= UART_IER_THRI;
-	serial_out(up, UART_IER, ier | UART_IER_THRI);
+	serial_out(up, UART_IER, ier);
+	
+	if (locked)
+		spin_unlock_irqrestore(&up->port.lock, flags);
+	else
+		local_irq_restore(flags);
 }
 
 static int serial8250_console_setup(struct console *co, char *options)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux