Re: Lock-up with modprobe sdhci after suspending to ram

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jani-Matti Hätinen wrote:
>
> Ok, this is what I get on Loglevel 9.
>   If I try to suspend with the module loaded and with a card in the reader I 
> get:
> Stopping tasks: ================================|
> ipw2200: Failed to send CARD_DISABLE: Command timed out
> ACPI: PCI interrupt for device 0000:01:05.0 disabled
> sdhci [sdhci_suspend()]: Suspending...
> MMC: starting cmd 07 arg 00000000 flags 00000000
> sdhci [sdhci_send_command()]: Sending cmd (7)
>
> And if I modprobe sdhci after suspend&resume I get the following:
>   First from the modprobe (not all of it is visible):
> sdhci: Sys addr: 0xffffffff | Version:  0x0000ffff
> sdhci: Blk size: 0x0000ffff | Blk cnt:  0x0000ffff
> sdhci: Argument: 0xffffffff | Trn mode: 0x0000ffff
> sdhci: Present:  0xffffffff | Host ctl: 0x000000ff
> sdhci: Power:    0x000000ff | Blk gap:  0x000000ff
> sdhci: Wake-up:  0x000000ff | Clock:    0x0000ffff
> sdhci: Timeout:  0x000000ff | Int stat: 0xffffffff
> sdhci: Int enab: 0xffffffff | Sig enab: 0xffffffff
> sdhci: AC12 err: 0x0000ffff | Slot int: 0x0000ffff
> sdhci: Caps:     0xffffffff | Max curr: 0xffffffff
> sdhci: ===========================================
>   

Now this is horribly broken and would explain why things go south. I
guess the chip needs a reset early in the detection sequence to function
properly. Try putting:

    sdhci_reset(host, SDHCI_RESET_ALL);

just before the driver does a readl() on the capabilities register (in
sdhci_probe_slot()).

>   Also I just noticed that if the machine has been through at least one 
> suspend&resume cycle, rebooting no longer works. All processes exit cleanly, 
> but the system just hangs when it should shut down.
>   

That's just probably a broken ACPI. Laptops tend to be buggy as hell.
File a report with the ACPI guys.

Rgds
Pierre

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux