On Wed, 26 Apr 2006 23:46:27 +0200 (CEST), Karel Gardas <[email protected]> wrote:
>
>Hello,
>
>I'm trying to get working linux with Xircom RealPort CardBus Ethernet
>10/100+Modem 56 PCMCIA card. I only need ethernet working. The problem
>with this is that I'm losing too many packets while syslog is filled with
>messages like:
>
>Apr 26 23:17:31 thinkpad kernel: pccard: CardBus card inserted into slot 1
>Apr 26 23:18:13 thinkpad kernel: PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
>Apr 26 23:18:13 thinkpad kernel: PCI: Setting latency timer of device 0000:06:00.0 to 64
>Apr 26 23:18:13 thinkpad kernel: eth1: Xircom cardbus revision 3 at irq 11
>Apr 26 23:19:31 thinkpad kernel: xircom cardbus adaptor found, registering as eth1, using irq 11
>Apr 26 23:19:52 thinkpad kernel: xircom_cb: Link status has changed
>Apr 26 23:19:52 thinkpad kernel: xircom_cb: Link is 100 mbit
I use same driver with Xircom RBE-100, no problems, .config + dmesg on
http://bugsplatter.mine.nu/test/boxen/tosh/
The xircom_cb driver on 2.6.16.11 is okay here.
Grant.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]