Different ipath hardware types have different numbers of buffers
available, so we decide on the counts ourselves unless we are specifically
overridden with a module parameter.
Signed-off-by: Bryan O'Sullivan <[email protected]>
diff -r 49f2286e0bdc -r 8e724d49e74b drivers/infiniband/hw/ipath/ipath_init_chip.c
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c Wed Apr 19 15:24:36 2006 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c Wed Apr 19 15:24:36 2006 -0700
@@ -53,13 +53,19 @@ MODULE_PARM_DESC(cfgports, "Set max numb
/*
* Number of buffers reserved for driver (layered drivers and SMA
- * send). Reserved at end of buffer list.
+ * send). Reserved at end of buffer list. Initialized based on
+ * number of PIO buffers if not set via module interface.
+ * The problem with this is that it's global, but we'll use different
+ * numbers for different chip types. So the default value is not
+ * very useful. I've redefined it for the 1.3 release so that it's
+ * zero unless set by the user to something else, in which case we
+ * try to respect it.
*/
-static ushort ipath_kpiobufs = 32;
+static ushort ipath_kpiobufs;
static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp);
-module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_uint,
+module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort,
&ipath_kpiobufs, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver");
@@ -531,8 +537,11 @@ static int init_housekeeping(struct ipat
* Don't clear ipath_flags as 8bit mode was set before
* entering this func. However, we do set the linkstate to
* unknown, so we can watch for a transition.
- */
- dd->ipath_flags |= IPATH_LINKUNK;
+ * PRESENT is set because we want register reads to work,
+ * and the kernel infrastructure saw it in config space;
+ * We clear it if we have failures.
+ */
+ dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT;
dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED |
IPATH_LINKDOWN | IPATH_LINKINIT);
@@ -560,6 +569,7 @@ static int init_housekeeping(struct ipat
|| (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
ipath_dev_err(dd, "Register read failures from chip, "
"giving up initialization\n");
+ dd->ipath_flags &= ~IPATH_PRESENT;
ret = -ENODEV;
goto done;
}
@@ -682,16 +692,14 @@ int ipath_init_chip(struct ipath_devdata
*/
dd->ipath_pioavregs = ALIGN(val, sizeof(u64) * BITS_PER_BYTE / 2)
/ (sizeof(u64) * BITS_PER_BYTE / 2);
- if (!ipath_kpiobufs) /* have to have at least 1, for SMA */
- kpiobufs = ipath_kpiobufs = 1;
- else if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) <
- (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT)) {
- dev_info(&dd->pcidev->dev, "Too few PIO buffers (%u) "
- "for %u ports to have %u each!\n",
- dd->ipath_piobcnt2k + dd->ipath_piobcnt4k,
- dd->ipath_cfgports, IPATH_MIN_USER_PORT_BUFCNT);
- kpiobufs = 1; /* reserve just the minimum for SMA/ether */
- } else
+ if (ipath_kpiobufs == 0) {
+ /* not set by user, or set explictly to default */
+ if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) > 128)
+ kpiobufs = 32;
+ else
+ kpiobufs = 16;
+ }
+ else
kpiobufs = ipath_kpiobufs;
if (kpiobufs >
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
