Junio routinely posts these nice "What's in git.git" messages to the git
mailing list. These posts are a useful guide to what's upcoming.
Since libata-dev.git contains a number of branches for ongoing
development projects, I thought a "What's in libata-dev.git" message
would be useful.
------------------------------------------------------------------------
branch: upstream (pending for 2.6.18)
parent: master
------------------------------------------------------------------------
Albert Lee:
libata: convert ATAPI_ENABLE_DMADIR to module parameter
Jeff Garzik:
[libata] kill bogus cut-n-pasted comments in three drivers
[libata] bump versions
libata: Fix EH merge difference between this branch and upstream.
libata: Add helper ata_shost_to_port()
Tejun Heo:
libata: fix ata_set_mode() return value
libata: make ata_bus_probe() return negative errno on failure
libata: separate out ata_spd_string()
libata: convert do_probe_reset() to ata_do_reset()
libata: implement ata_dev_enabled and disabled()
libata: make ata_set_mode() handle no-device case properly
libata: reorganize ata_set_mode()
libata: don't disable devices from ata_set_mode()
libata: preserve SATA SPD setting over hard resets
libata: implement ata_dev_absent()
libata: implement ap->sata_spd_limit and helpers
libata: use SATA speed down in ata_drive_probe_reset()
libata: add 5s sleep between resets
libata: implement ata_down_xfermask_limit()
libata: improve ata_bus_probe()
libata: consider disabled devices in ata_dev_xfermask()
libata: report device number when PIO fails
libata: ata_dev_revalidate() printk update
libata: ATA_FLAG_IN_EH is not used, kill it
libata: clean up constants
libata: rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED
libata: clear only affected flags during ata_dev_configure()
libata: clear ATA_DFLAG_PIO before setting it
libata: add ATA_QCFLAG_IO
libata: pass qc around intead of ap during PIO
libata: always generate sense if qc->err_mask is non-zero
libata: don't read TF directly from sense generation functions
libata: add @cdb to ata_exec_internal()
libata: dec scmd->retries for qcs with zero err_mask
libata: separate out libata-eh.c
libata: make some libata-core routines extern
libata: print SControl in SATA link status info message
ahci: do not fail softreset if PHY reports no device
libata: set default cbl in probeinit
libata: kill @verbose from ata_reset_fn_t
libata: make reset methods complain when they fail
sata_sil24: fix timeout calculation in sil24_softreset
sata_sil24: better error message from softreset
libata: implement ata_wait_register()
ahci: use ata_wait_register()
sata_sil24: use ata_wait_register()
libata: disable failed devices only once in ata_bus_probe()
libata: cosmetic update to ata_bus_probe()
libata: export ata_set_sata_spd()
sata_sil24: typo fix
sata_sil24: rename PORT_IRQ_SDB_FIS to PORT_IRQ_SDB_NOTIFY
sata_sil24: add more constants
sata_sil24: consolidate host flags into SIL24_COMMON_FLAGS
sata_sil24: implement loss of completion interrupt on PCI-X errta fix
sata_sil24: implement sil24_init_port()
sata_sil24: put port into known state before softresetting
sata_sil24: kill 10ms sleep in softreset
sata_sil24: reimplement hardreset
sata_sil24: don't do hardreset during driver initialization
sata_sil24: fix on-memory structure byteorder
sata_sil24: enable 64bit
------------------------------------------------------------------------
branch: sii-m15w (update Mod15Write blacklist, now that errata is
handled better)
parent: upstream
------------------------------------------------------------------------
Tejun Heo:
sata_sil: remove unaffected drives from m15w blacklist
------------------------------------------------------------------------
branch: sii-lbt (improve DMA handling, eliminate 64k legacy limits)
parent: sii-m15w
------------------------------------------------------------------------
Jeff Garzik:
[libata sata_sil] Greatly improve DMA handling
------------------------------------------------------------------------
branch: sii-irq (use sii-specific interrupt handler)
parent: sii-m15w
------------------------------------------------------------------------
Jeff Garzik:
[libata sata_sil] improved interrupt handling
[libata sata_sil] update for new ata_qc_complete() 1-arg API
libata: sata_sil build fix
------------------------------------------------------------------------
branch: promise-sata-pata (support for Promise PATA ports on SATA cards)
parent: upstream
------------------------------------------------------------------------
Erik Benada:
[libata sata_promise] support PATA ports on SATA controllers
Jeff Garzik:
[libata sata_promise] fix build breakage due to bad merge
------------------------------------------------------------------------
branch: pata-drivers (PATA drivers from Alan and Albert)
parent: upstream
------------------------------------------------------------------------
Alan Cox:
Add libata CMD/SI680 driver
[libata] Add PATA driver for Compaq Triflex
[libata] Add PATA VIA driver.
[libata] Add driver for PATA AMD/NVIDIA chips.
libata: Update the AMD driver to support the AMD CS5536.
libata: Add enablebits support to the triflex driver
libata: Add enablebits to via driver
[libata] Add new PATA driver pata_opti
libata: AMD pata fixes
libata: Fix opti pci enable bits as with the AMD bug
libata: Fix enable bits for triflex
libata: Clean up and fix the VIA PATA libata driver
libata: Update TODO list for pata_amd
libata: Updates to the MPIIX driver
Albert Lee:
[libata] add driver for Promise PATA 2027x
libata-dev-2.6: pdc2027x add ata_scsi_ioctl
libata-dev-2.6: pdc2027x change comments
libata-dev-2.6: pdc2027x move the PLL counter reading code
libata-dev-2.6: pdc2027x PLL input clock detection fix
libata-dev: Convert pdc2027x from PIO to MMIO
libata-dev: pdc2027x use "long" for counter data type
libata-dev: pdc2027x ATAPI DMA lost irq problem workaround
libata: pata_pdc2027x minor fix
libata: convert pata_pdc2027x to the new reset mechanism
Andrew Morton:
pata_opti needs PCI
Jeff Garzik:
[libata] pata_pdc2027x: update for recent ->host_stop() API changes
[libata pata_pdc2027x] add documentation ref in header; trim trailing whitespace
[libata pata_sil680] add to Makefile/Kconfig
libata: Add makefile rules for pata_via driver.
[libata] minor updates to PATA drivers
[libata] constify PCI tables in PATA drivers
[libata pata_via] fix warning
libata: Add Intel MPIIX and "old PIIX" PATA drivers.
[libata pata drivers] trim trailing whitespace
[libata] remove 'ordered_flush' member from PATA drivers
[libata pata] fix lingering old-style qc_issue_prot function declarations
[libata pata_pdc2027x] use pci_iomap(), kzalloc() where appropriate
[libata] s/ata_dev_present/ata_dev_enabled/ for several PATA drivers
[libata pata] update for removal of .eh_strategy_handler from Scsi_Host_Template
------------------------------------------------------------------------
branch: nv-adma (ADMA version of sata_nv)
parent: upstream
------------------------------------------------------------------------
Jeff Garzik:
[libata] ADMA version from sata_nv
[libata] sata_nv: cleanups
[libata] sata_nv: more cleanups
[libata] sata_nv: fix ADMA qc_issue prototype for latest libata API
[libata sata_nv] update for movement of eh_strategy_handler
------------------------------------------------------------------------
branch: max-sect (increase LBA48 max sectors)
parent: upstream
------------------------------------------------------------------------
Tejun Heo:
libata: increase LBA48 max sectors to 65535
------------------------------------------------------------------------
branch: irq-pio (IRQ-driven PIO)
parent: upstream
------------------------------------------------------------------------
Albert Lee:
libata: interrupt driven pio for libata-core
libata: interrupt driven pio for LLD
libata irq-pio: add comments and cleanup
libata irq-pio: rename atapi_packet_task() and comments
libata irq-pio: simplify if condition in ata_dataout_task()
libata irq-pio: cleanup ata_qc_issue_prot()
libata: move atapi_send_cdb() and ata_dataout_task()
[libata irq-pio] reorganize ata_pio_sector() and __atapi_pio_bytes()
[libata irq-pio] reorganize "buf + offset" in ata_pio_sector()
[libata irq-pio] use PageHighMem() to optimize the kmap_atomic() usage
libata irq-pio: misc fixes
libata irq-pio: merge the ata_dataout_task workqueue with ata_pio_task workqueue
libata irq-pio: eliminate unnecessary queuing in ata_pio_first_block()
libata irq-pio: add read/write multiple support
libata-dev: determine err_mask when error is found
libata-dev: filter out noisy ATAPI error messages
libata-dev: Fix array index value in ata_rwcmd_protocol()
libata-dev: Use new ata_queue_pio_task() for PIO polling task
libata-dev: Use new AC_ERR_* flags
libata-dev: Minor comment fix
libata-dev: recognize WRITE_MULTI_FUA_EXT for r/w multiple
libata-dev: Remove trailing whitespaces
libata-dev: Fix merge problem with upstream
libata-dev: Remove atapi_packet_task()
libata-dev: Move out the HSM code from ata_host_intr()
libata-dev: Minor fix for ata_hsm_move() to work with ata_host_intr()
libata-dev: Let ata_hsm_move() work with both irq-pio and polling pio
libata-dev: Convert ata_pio_task() to use the new ata_hsm_move()
libata-dev: Cleanup unused enums/functions
libata-dev: ata_check_atapi_dma() fix for ATA_FLAG_PIO_POLLING LLDDs
libata-dev: Make the the in_wq check as an inline function
libata-dev: irq-pio minor fixes (respin)
libata-dev: fix the device err check sequence (respin)
libata-dev: wait idle after reading the last data block
libata-dev: print out information for ATAPI devices with CDB interrupts
libata-dev: handle DRQ=1 ERR=1 (revised)
libata-dev: irq-pio minor fix
libata-dev: irq-pio minor fix 2
Jeff Garzik:
[libata irq-pio] build fix
[libata pdc_adma] update for removal of ATA_FLAG_NOINTR
[libata pdc_adma] fix for new irq-driven PIO code
[libata sata_mv] IRQ PIO build fix
[libata] irq-pio: fix breakage related to err_mask merge
[libata sata_promise] irq_pio: fix merge bug
[libata] build fix after merging some pre-packet_task-removal code
[libata irq-pio] s/assert/WARN_ON/
[libata] build fix after cdb_len move
sata_vsc build fix
libata: irq-pio build fixes
[libata] irq-pio: fix build breakage
[libata] irq-pio: Fix merge mistake
------------------------------------------------------------------------
branch: iomap (use lib/iomap in libata)
parent: git-merge-base iomap master
------------------------------------------------------------------------
Older work converting libata to use iomap.
------------------------------------------------------------------------
branch: ALL (merge of all useful libata-dev.git branches)
parent: upstream, sii-m15w, promise-sata-pata, pata-drivers, max-sect
------------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
