ACKed-By: Kylie Hall <[email protected]>
On Wed, 2006-04-12 at 17:09 +0200, Marcel Selhorst wrote:
> Dear LKML,
>
> this patch applies the latest changes in the TPM interface to the Infineon TPM-driver
> (as posted by Kylene Hall yesterday - see below)
>
> > Kylene Jo Hall wrote:
> > To assist with chip management and better support the possibility of
> > having multiple TPMs in the system of the same kind, the struct
> > tpm_vendor_specific member of the tpm_chip was changed from a pointer to
> > an instance. This patch changes that declaration and fixes up all
> > accesses to the structure member except in tpm_infineon which is coming
> > in a patch from Marcel Selhorst.
> >
> > Changes in the 1.2 TPM Specification make it necessary to update some
> > fields of the chip structure in the initialization function after it is
> > registered with tpm.c thus tpm_register_hardware was modified to return
> > a pointer to the structure. This patch makes that change and the
> > associated changes in tpm_atmel and tpm_nsc. The changes to
> > tpm_infineon will be coming in a patch from Marcel Selhorst.
>
> Signed-off-by: Marcel Selhorst <[email protected]>
> ---
> --- linux-old/drivers/char/tpm/tpm_infineon.c 2006-03-20 05:53:29.000000000 +0000
> +++ linux-2.6.16-rc3/drivers/char/tpm/tpm_infineon.c 2006-04-06 11:37:24.000000000 +0000
> @@ -104,7 +104,7 @@ static int empty_fifo(struct tpm_chip *c
>
> if (clear_wrfifo) {
> for (i = 0; i < 4096; i++) {
> - status = inb(chip->vendor->base + WRFIFO);
> + status = inb(chip->vendor.base + WRFIFO);
> if (status == 0xff) {
> if (check == 5)
> break;
> @@ -124,8 +124,8 @@ static int empty_fifo(struct tpm_chip *c
> */
> i = 0;
> do {
> - status = inb(chip->vendor->base + RDFIFO);
> - status = inb(chip->vendor->base + STAT);
> + status = inb(chip->vendor.base + RDFIFO);
> + status = inb(chip->vendor.base + STAT);
> i++;
> if (i == TPM_MAX_TRIES)
> return -EIO;
> @@ -138,7 +138,7 @@ static int wait(struct tpm_chip *chip, i
> int status;
> int i;
> for (i = 0; i < TPM_MAX_TRIES; i++) {
> - status = inb(chip->vendor->base + STAT);
> + status = inb(chip->vendor.base + STAT);
> /* check the status-register if wait_for_bit is set */
> if (status & 1 << wait_for_bit)
> break;
> @@ -157,7 +157,7 @@ static int wait(struct tpm_chip *chip, i
> static void wait_and_send(struct tpm_chip *chip, u8 sendbyte)
> {
> wait(chip, STAT_XFE);
> - outb(sendbyte, chip->vendor->base + WRFIFO);
> + outb(sendbyte, chip->vendor.base + WRFIFO);
> }
>
> /* Note: WTX means Waiting-Time-Extension. Whenever the TPM needs more
> @@ -204,7 +204,7 @@ recv_begin:
> ret = wait(chip, STAT_RDA);
> if (ret)
> return -EIO;
> - buf[i] = inb(chip->vendor->base + RDFIFO);
> + buf[i] = inb(chip->vendor.base + RDFIFO);
> }
>
> if (buf[0] != TPM_VL_VER) {
> @@ -219,7 +219,7 @@ recv_begin:
>
> for (i = 0; i < size; i++) {
> wait(chip, STAT_RDA);
> - buf[i] = inb(chip->vendor->base + RDFIFO);
> + buf[i] = inb(chip->vendor.base + RDFIFO);
> }
>
> if ((size == 0x6D00) && (buf[1] == 0x80)) {
> @@ -268,7 +268,7 @@ static int tpm_inf_send(struct tpm_chip
> u8 count_high, count_low, count_4, count_3, count_2, count_1;
>
> /* Disabling Reset, LP and IRQC */
> - outb(RESET_LP_IRQC_DISABLE, chip->vendor->base + CMD);
> + outb(RESET_LP_IRQC_DISABLE, chip->vendor.base + CMD);
>
> ret = empty_fifo(chip, 1);
> if (ret) {
> @@ -319,7 +319,7 @@ static void tpm_inf_cancel(struct tpm_ch
>
> static u8 tpm_inf_status(struct tpm_chip *chip)
> {
> - return inb(chip->vendor->base + STAT);
> + return inb(chip->vendor.base + STAT);
> }
>
> static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
> @@ -346,7 +346,7 @@ static struct file_operations inf_ops =
> .release = tpm_release,
> };
>
> -static struct tpm_vendor_specific tpm_inf = {
> +static const struct tpm_vendor_specific tpm_inf = {
> .recv = tpm_inf_recv,
> .send = tpm_inf_send,
> .cancel = tpm_inf_cancel,
> @@ -375,6 +375,7 @@ static int __devinit tpm_inf_pnp_probe(s
> int version[2];
> int productid[2];
> char chipname[20];
> + struct tpm_chip *chip;
>
> /* read IO-ports through PnP */
> if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
> @@ -395,14 +396,13 @@ static int __devinit tpm_inf_pnp_probe(s
> goto err_last;
> }
> /* publish my base address and request region */
> - tpm_inf.base = TPM_INF_BASE;
> if (request_region
> - (tpm_inf.base, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) {
> + (TPM_INF_BASE, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) {
> rc = -EINVAL;
> goto err_last;
> }
> - if (request_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN,
> - "tpm_infineon0") == NULL) {
> + if (request_region
> + (TPM_INF_ADDR, TPM_INF_ADDR_LEN, "tpm_infineon0") == NULL) {
> rc = -EINVAL;
> goto err_last;
> }
> @@ -442,9 +442,9 @@ static int __devinit tpm_inf_pnp_probe(s
>
> /* configure TPM with IO-ports */
> outb(IOLIMH, TPM_INF_ADDR);
> - outb(((tpm_inf.base >> 8) & 0xff), TPM_INF_DATA);
> + outb(((TPM_INF_BASE >> 8) & 0xff), TPM_INF_DATA);
> outb(IOLIML, TPM_INF_ADDR);
> - outb((tpm_inf.base & 0xff), TPM_INF_DATA);
> + outb((TPM_INF_BASE & 0xff), TPM_INF_DATA);
>
> /* control if IO-ports are set correctly */
> outb(IOLIMH, TPM_INF_ADDR);
> @@ -452,10 +452,10 @@ static int __devinit tpm_inf_pnp_probe(s
> outb(IOLIML, TPM_INF_ADDR);
> iol = inb(TPM_INF_DATA);
>
> - if ((ioh << 8 | iol) != tpm_inf.base) {
> + if ((ioh << 8 | iol) != TPM_INF_BASE) {
> dev_err(&dev->dev,
> - "Could not set IO-ports to 0x%lx\n",
> - tpm_inf.base);
> + "Could not set IO-ports to 0x%x\n",
> + TPM_INF_BASE);
> rc = -EIO;
> goto err_release_region;
> }
> @@ -466,15 +466,15 @@ static int __devinit tpm_inf_pnp_probe(s
> outb(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
>
> /* disable RESET, LP and IRQC */
> - outb(RESET_LP_IRQC_DISABLE, tpm_inf.base + CMD);
> + outb(RESET_LP_IRQC_DISABLE, TPM_INF_BASE + CMD);
>
> /* Finally, we're done, print some infos */
> dev_info(&dev->dev, "TPM found: "
> "config base 0x%x, "
> "io base 0x%x, "
> - "chip version %02x%02x, "
> - "vendor id %x%x (Infineon), "
> - "product id %02x%02x"
> + "chip version 0x%02x%02x, "
> + "vendor id 0x%x%x (Infineon), "
> + "product id 0x%02x%02x"
> "%s\n",
> TPM_INF_ADDR,
> TPM_INF_BASE,
> @@ -482,11 +482,10 @@ static int __devinit tpm_inf_pnp_probe(s
> vendorid[0], vendorid[1],
> productid[0], productid[1], chipname);
>
> - rc = tpm_register_hardware(&dev->dev, &tpm_inf);
> - if (rc < 0) {
> - rc = -ENODEV;
> + if (!(chip = tpm_register_hardware(&dev->dev, &tpm_inf))) {
> goto err_release_region;
> }
> + chip->vendor.base = TPM_INF_BASE;
> return 0;
> } else {
> rc = -ENODEV;
> @@ -494,7 +493,7 @@ static int __devinit tpm_inf_pnp_probe(s
> }
>
> err_release_region:
> - release_region(tpm_inf.base, TPM_INF_PORT_LEN);
> + release_region(TPM_INF_BASE, TPM_INF_PORT_LEN);
> release_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN);
>
> err_last:
> @@ -506,7 +505,8 @@ static __devexit void tpm_inf_pnp_remove
> struct tpm_chip *chip = pnp_get_drvdata(dev);
>
> if (chip) {
> - release_region(chip->vendor->base, TPM_INF_PORT_LEN);
> + release_region(TPM_INF_BASE, TPM_INF_PORT_LEN);
> + release_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN);
> tpm_remove_hardware(chip->dev);
> }
> }
> @@ -538,5 +538,5 @@ module_exit(cleanup_inf);
>
> MODULE_AUTHOR("Marcel Selhorst <[email protected]>");
> MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
> -MODULE_VERSION("1.7");
> +MODULE_VERSION("1.8");
> MODULE_LICENSE("GPL");
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]