PROBLEM: usbstorage + radeon = resume from stdby screen garbled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




  Hi Folks, 


One line summary of the problem:    
When using usb 2.0 card reader and radeon module, suspend2r-resume-cycle behaves badly.


Full description of the problem/report:
Reproducingly connecting the card reader and a successive suspend-resume-cycle
collide. Suspend itself is ok as usual. Resume from suspend to ram works in sense of system resumes. X however cannot be used any more. Garbled screen, i. e. the mouse cursor is a colorful square. Nothing else may be recognized as X running. Switching to
console does not relieve. Console ist useless also. Single exit is reboot via 3-key-press..
Afterwards, when rebooting console screen shows (mainly green) vertical bars of the height of a pipe-sign. The bars clutter the screen with a kind of systematic pattern.


Keywords (i.e., modules, networking, kernel):
usbstorage, radeon, kernel 2.6.16.1, suspend, resume, X hangs with garbled screen


/proc/version:
--------------

Linux version 2.6.16tf (root@tadpole) (gcc version 3.3.6 (Debian 1:3.3.6-9)) #1 PREEMPT Mon Mar 20 14:07:05 CET 2006


Output of Oops.. message:
No Oops. X is unusable. Console also. System itself is working (disk/net). Reboot possible.

A small shell script or example program which triggers the problem:
Not applicable. Suspend-resume causes problem.

/usr/src/linux/scripts/ver_linux:
---------------------------------

If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
 
Linux tadpole 2.6.16tf #1 PREEMPT Mon Mar 20 14:07:05 CET 2006 i686 GNU/Linux
 
Gnu C                  4.0.3
Gnu make               3.80
binutils               2.16.91
util-linux             2.12p
mount                  2.12p
module-init-tools      3.2.2
e2fsprogs              1.39-WIP
reiserfsprogs          line
reiser4progs           line
Linux C Library        2.3.6
Dynamic linker (ldd)   2.3.6
Procps                 3.2.6
Net-tools              1.60
Kbd                    [opzione...]
Console-tools          0.2.3
Sh-utils               5.2.1
udev                   088
Modules Loaded         usb_storage libusual xt_state ipv6 eepro100 radeon drm snd_usb_audio snd_usb_lib snd_rawmidi snd_seq_device snd_hwdep pwc hci_usb usbhid yenta_socket rsrc_nonstatic pcmcia_core snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd uhci_hcd snd_page_alloc usbcore psmouse


/proc/cpuinfo:
--------------

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 15
model		: 2
model name	: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz
stepping	: 4
cpu MHz		: 1600.000
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips	: 3203.88



/proc/modules:
--------------

usb_storage 93840 0 - Live 0xf1a36000
libusual 13968 1 usb_storage, Live 0xf1994000
xt_state 1920 23 - Live 0xf193f000
ipv6 215424 22 - Live 0xf1a00000
eepro100 25744 0 - Live 0xf1959000
radeon 98336 1 - Live 0xf19a5000
drm 58900 2 radeon, Live 0xf197b000
snd_usb_audio 71488 0 - Live 0xf1968000
snd_usb_lib 13568 1 snd_usb_audio, Live 0xf193a000
snd_rawmidi 20128 1 snd_usb_lib, Live 0xf1902000
snd_seq_device 6924 1 snd_rawmidi, Live 0xf191a000
snd_hwdep 7556 1 snd_usb_audio, Live 0xf1917000
pwc 44796 0 - Live 0xf1943000
hci_usb 13332 2 - Live 0xf1908000
usbhid 32992 0 - Live 0xf190d000
yenta_socket 21772 0 - Live 0xf18e6000
rsrc_nonstatic 10496 1 yenta_socket, Live 0xf18e2000
pcmcia_core 33808 2 yenta_socket,rsrc_nonstatic, Live 0xf189a000
snd_intel8x0 26908 0 - Live 0xf18a4000
snd_ac97_codec 81952 1 snd_intel8x0, Live 0xf191e000
snd_ac97_bus 2048 1 snd_ac97_codec, Live 0xf086e000
snd_pcm_oss 49952 0 - Live 0xf18d4000
snd_mixer_oss 14976 1 snd_pcm_oss, Live 0xf087a000
snd_pcm 79240 4 snd_usb_audio,snd_intel8x0,snd_ac97_codec,snd_pcm_oss, Live 0xf18ed000
snd_timer 20868 1 snd_pcm, Live 0xf1893000
snd 47460 11 snd_usb_audio,snd_usb_lib,snd_rawmidi,snd_seq_device,snd_hwdep,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer, Live 0xf18c7000
uhci_hcd 27792 0 - Live 0xf188b000
snd_page_alloc 8456 2 snd_intel8x0,snd_pcm, Live 0xf0870000
usbcore 106116 9 usb_storage,libusual,snd_usb_audio,snd_usb_lib,pwc,hci_usb,usbhid,uhci_hcd, Live 0xf18ac000
psmouse 33160 0 - Live 0xf1881000


/proc/ioports:
--------------

0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03bc-03be : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
1000-107f : 0000:00:1f.0
  1000-107f : motherboard
    1000-1003 : PM1a_EVT_BLK
    1004-1005 : PM1a_CNT_BLK
    1008-100b : PM_TMR
    1010-1015 : ACPI CPU throttle
    1020-1020 : PM2_CNT_BLK
    1028-102b : GPE0_BLK
    102c-102f : GPE1_BLK
1180-11bf : 0000:00:1f.0
  1180-11bf : motherboard
15e0-15ef : motherboard
1600-167f : motherboard
1800-181f : 0000:00:1d.0
  1800-181f : uhci_hcd
1820-183f : 0000:00:1d.1
  1820-183f : uhci_hcd
1840-185f : 0000:00:1d.2
  1840-185f : uhci_hcd
1860-186f : 0000:00:1f.1
  1860-1867 : ide0
  1868-186f : ide1
1880-189f : 0000:00:1f.3
18c0-18ff : 0000:00:1f.5
  18c0-18ff : Intel 82801CA-ICH3
1c00-1cff : 0000:00:1f.5
  1c00-1cff : Intel 82801CA-ICH3
2000-207f : 0000:00:1f.6
2400-24ff : 0000:00:1f.6
3000-3fff : PCI Bus #01
  3000-30ff : 0000:01:00.0
4000-8fff : PCI Bus #02
  4000-40ff : PCI CardBus #03
  4400-44ff : PCI CardBus #03
  4800-48ff : PCI CardBus #07
  4c00-4cff : PCI CardBus #07
  8000-803f : 0000:02:08.0
    8000-803f : eepro100


/proc/iomem:
------------

00000000-0009efff : System RAM
0009f000-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cffff : Video ROM
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-2ff6ffff : System RAM
  00100000-0055afa2 : Kernel code
  0055afa3-0076a46b : Kernel data
2ff70000-2ff7dfff : ACPI Tables
2ff7e000-2ff7ffff : ACPI Non-volatile Storage
2ff80000-2fffffff : reserved
40000000-400003ff : 0000:00:1f.1
50000000-50000fff : 0000:02:00.0
  50000000-50000fff : yenta_socket
50100000-50100fff : 0000:02:00.1
  50100000-50100fff : yenta_socket
d0100000-d01fffff : PCI Bus #01
  d0100000-d010ffff : 0000:01:00.0
    d0100000-d010ffff : radeonfb mmio
  d0120000-d013ffff : 0000:01:00.0
d0200000-dfffffff : PCI Bus #02
  d0200000-d0200fff : 0000:02:08.0
    d0200000-d0200fff : eepro100
  d2000000-d3ffffff : PCI CardBus #03
  d4000000-d5ffffff : PCI CardBus #07
e0000000-e3ffffff : 0000:00:00.0
e8000000-efffffff : PCI Bus #01
  e8000000-efffffff : 0000:01:00.0
    e8000000-efffffff : radeonfb framebuffer
f0000000-f80fffff : PCI Bus #02
  f0000000-f1ffffff : PCI CardBus #03
  f2000000-f3ffffff : PCI CardBus #07
  f8000000-f8000fff : 0000:02:02.0
ff800000-ffffffff : reserved


lspci -vvv:
-----------

0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
	Capabilities: <available only to root>

0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 96
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: d0100000-d01fffff
	Prefetchable memory behind bridge: e8000000-efffffff
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad A/T/X Series
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 4: I/O ports at 1800 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad A/T/X Series
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 1820 [size=32]

0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad A/T/X Series
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 11
	Region 4: I/O ports at 1840 [size=32]

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 42) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
	I/O behind bridge: 00004000-00008fff
	Memory behind bridge: d0200000-dfffffff
	Prefetchable memory behind bridge: f0000000-f80fffff
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

0000:00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: IBM ThinkPad A/T/X Series
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at <ignored>
	Region 1: I/O ports at <ignored>
	Region 2: I/O ports at <ignored>
	Region 3: I/O ports at <ignored>
	Region 4: I/O ports at 1860 [size=16]
	Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
	Subsystem: IBM ThinkPad A/T/X Series
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 1880 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio Controller (rev 02)
	Subsystem: IBM ThinkPad T30
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 11
	Region 0: I/O ports at 1c00 [size=256]
	Region 1: I/O ports at 18c0 [size=64]

0000:00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem Controller (rev 02) (prog-if 00 [Generic])
	Subsystem: IBM: Unknown device 0227
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 11
	Region 0: I/O ports at 2400 [size=256]
	Region 1: I/O ports at 2000 [size=128]

0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] (prog-if 00 [VGA])
	Subsystem: IBM: Unknown device 0509
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 66 (2000ns min), Cache Line Size: 0x08 (32 bytes)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 3000 [size=256]
	Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at d0120000 [disabled] [size=128K]
	Capabilities: <available only to root>

0000:02:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
	Subsystem: IBM ThinkPad A/T/X Series
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
	Memory window 0: f0000000-f1fff000 (prefetchable)
	Memory window 1: d2000000-d3fff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

0000:02:00.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
	Subsystem: IBM ThinkPad A/T/X Series
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=07, subordinate=07, sec-latency=176
	Memory window 0: f2000000-f3fff000 (prefetchable)
	Memory window 1: d4000000-d5fff000
	I/O window 0: 00004800-000048ff
	I/O window 1: 00004c00-00004cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

0000:02:02.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
	Subsystem: Actiontec Electronics Inc: Unknown device 0406
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, Cache Line Size: 0x08 (32 bytes)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=4K]
	Capabilities: <available only to root>

0000:02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
	Subsystem: IBM ThinkPad A/T/X Series
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 0x08 (32 bytes)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at 8000 [size=64]
	Capabilities: <available only to root>



/proc/scsi/scsi:
----------------

Attached devices:
usb 2.0 card reader, usbview:
T:  Bus=02 Lev=02 Prnt=03 Port=01 Cnt=02 Dev#=  8 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0dda ProdID=2005 Rev= 1.9c
S:  Manufacturer=Hama Card Reader
S:  Product=Hama Card Reader
S:  SerialNumber=ABCD12345683
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms


/proc/cmdline:
--------------

root=/dev/hda1 acpi=on vga=ext ro video=force_sleep,mirror,radeon_force_sleep=1 acpi_sleep=s3_bios

Changing boot options (video=...) does not have influence on this problem.


/proc/interrupts:
-----------------

           CPU0       
  0:     831424          XT-PIC  timer
  1:         14          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  8:          4          XT-PIC  rtc
  9:      10557          XT-PIC  acpi
 11:     878891          XT-PIC  uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, Intel 82801CA-ICH3, yenta, yenta, eth0, radeon@pci:0000:01:00.0
 12:        149          XT-PIC  i8042
 14:      46202          XT-PIC  ide0
 15:         37          XT-PIC  ide1
NMI:          0 
LOC:          0 
ERR:          0
MIS:          0


cat /proc/config.gz | grep "[y|m]":
-----------------------------------

# Automatically generated make config: don't edit
CONFIG_X86_32=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
# Code maturity level options
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_UID16=y
CONFIG_VM86=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
# Loadable module support
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
# Block layer
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
CONFIG_DEFAULT_IOSCHED="anticipatory"
# Processor type and features
CONFIG_X86_PC=y
CONFIG_MPENTIUM4=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# Firmware Drivers
CONFIG_NOHIGHMEM=y
CONFIG_VMSPLIT_3G=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_MTRR=y
CONFIG_SECCOMP=y
CONFIG_HZ_250=y
CONFIG_DOUBLEFAULT=y
# Power management options (ACPI, APM)
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_SWSUSP_ENCRYPT=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_SLEEP_PROC_SLEEP=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_IBM=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# APM (Advanced Power Management) BIOS Support
CONFIG_APM=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_RTC_IS_GMT=y
CONFIG_APM_ALLOW_INTS=y
CONFIG_APM_REAL_MODE_POWER_OFF=y
# CPU Frequency scaling
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# Executable file formats
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_BRIDGE_NETFILTER=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_FTP=y
CONFIG_IP_NF_IRC=y
CONFIG_IP_NF_TFTP=y
CONFIG_IP_NF_AMANDA=y
CONFIG_IP_NF_PPTP=y
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_MATCH_ADDRTYPE=y
CONFIG_IP_NF_MATCH_HASHLIMIT=y
CONFIG_IP_NF_MATCH_POLICY=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
CONFIG_IP_NF_NAT_SNMP_BASIC=y
CONFIG_IP_NF_NAT_IRC=y
CONFIG_IP_NF_NAT_FTP=y
CONFIG_IP_NF_NAT_TFTP=y
CONFIG_IP_NF_NAT_AMANDA=y
CONFIG_IP_NF_NAT_PPTP=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_POLICY=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_HMAC_MD5=y
CONFIG_BRIDGE=y
CONFIG_VLAN_8021Q=y
CONFIG_LLC=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y
CONFIG_IRDA=y
CONFIG_IRLAN=y
CONFIG_IRNET=y
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
CONFIG_IRTTY_SIR=y
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=y
CONFIG_ACTISYS_DONGLE=y
CONFIG_TEKRAM_DONGLE=y
CONFIG_LITELINK_DONGLE=y
CONFIG_MA600_DONGLE=y
CONFIG_GIRBIL_DONGLE=y
CONFIG_MCP2120_DONGLE=y
CONFIG_OLD_BELKIN_DONGLE=y
CONFIG_ACT200L_DONGLE=y
CONFIG_IRPORT_SIR=y
CONFIG_DONGLE_OLD=y
CONFIG_ESI_DONGLE_OLD=y
CONFIG_ACTISYS_DONGLE_OLD=y
CONFIG_TEKRAM_DONGLE_OLD=y
CONFIG_GIRBIL_DONGLE_OLD=y
CONFIG_LITELINK_DONGLE_OLD=y
CONFIG_MCP2120_DONGLE_OLD=y
CONFIG_OLD_BELKIN_DONGLE_OLD=y
CONFIG_USB_IRDA=m
CONFIG_NSC_FIR=y
CONFIG_WINBOND_FIR=y
CONFIG_TOSHIBA_FIR=y
CONFIG_SMC_IRCC_FIR=y
CONFIG_ALI_FIR=y
CONFIG_VLSI_FIR=y
CONFIG_VIA_FIR=y
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=y
CONFIG_BT_HIDP=y
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=y
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
CONFIG_IEEE80211_CRYPT_TKIP=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_CONNECTOR=m
# Memory Technology Devices (MTD)
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_1284=y
# Plug and Play support
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
# Please see Documentation/ide.txt for help/info on IDE drives
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
# SCSI support type (disk, tape, CD-ROM)
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=y
CONFIG_IEEE1394=y
# Subsystem Options
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=y
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_ETH1394=y
CONFIG_IEEE1394_DV1394=y
CONFIG_IEEE1394_RAWIO=y
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
CONFIG_NETDEVICES=y
CONFIG_IFB=y
CONFIG_DUMMY=y
CONFIG_BONDING=y
CONFIG_TUN=y
CONFIG_PHYLIB=m
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# Tulip family network device support
CONFIG_NET_PCI=y
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_SKGE=m
# Wireless LAN (non-hamradio)
CONFIG_NET_RADIO=y
CONFIG_STRIP=m
# Wireless 802.11 Frequency Hopping cards support
CONFIG_PCMCIA_RAYCS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2200=m
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
# Wireless 802.11b Pcmcia/Cardbus cards support
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
CONFIG_PRISM54=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_NET_WIRELESS=y
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_SHAPER=y
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# ISDN subsystem
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
# ISDN feature submodules
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DIVERSION=m
CONFIG_ISDN_DRV_HISAX=m
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_DEBUG=y
# HiSax PCMCIA card service modules
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
# HiSax sub driver modules
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
# CAPI subsystem
CONFIG_ISDN_CAPI=y
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=y
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=y
CONFIG_ISDN_CAPI_CAPIDRV=m
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=y
# Telephony Support
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=y
CONFIG_RTC=y
# Ftape, the floppy tape device driver
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_DRM=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_MWAVE=m
CONFIG_HANGCHECK_TIMER=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
# I2C Algorithms
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
CONFIG_I2C_I810=y
CONFIG_I2C_ISA=m
CONFIG_SENSORS_DS1374=m
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
CONFIG_W1=y
CONFIG_W1_DS9490=m
CONFIG_W1_DS9490_BRIDGE=m
CONFIG_W1_THERM=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_HDAPS=m
CONFIG_IBM_ASM=y
# Multimedia Capabilities Port drivers
# Multimedia devices
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
CONFIG_FB_I810=y
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
CONFIG_FB_RADEON_OLD=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_DEBUG=y
# Console display driver support
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_SUN8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_DEVICE=y
CONFIG_SOUND=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_DETECT=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_USB_AUDIO=m
# Open Sound System
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
CONFIG_USB_DEVICEFS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# may also be needed; see USB_STORAGE Help for more information
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_LIBUSUAL=y
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_KEYSPAN_REMOTE=m
# USB Imaging devices
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# USB Multimedia devices
CONFIG_USB_DABUSB=m
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_STV680=m
CONFIG_USB_W9968CF=m
CONFIG_USB_PWC=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_MON=y
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYTHERM=m
# USB DSL modem support
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_WBSD=y
# File systems
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_FS_POSIX_ACL=y
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
# CD-ROM/DVD Filesystems
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
# DOS/FAT/NT Filesystems
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
# Pseudo filesystems
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
CONFIG_CONFIGFS_FS=y
# Miscellaneous filesystems
CONFIG_CRAMFS=y
CONFIG_HPFS_FS=y
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
# Network File Systems
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_CIFS=y
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_AFS_FS=y
CONFIG_RXRPC=y
# Partition Types
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
# Instrumentation Support
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FORCED_INLINING=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# Page alloc debug is incompatible with Software Suspend on i386
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# Security options
# Cryptographic options
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_TEST=y
# Hardware crypto devices
# Library routines
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y


Other notes, patches, fixes, workarounds:
Not yet known.


uptime:
-------

 12:30:27 up 55 min,  7 users,  load average: 0.20, 0.17, 0.09


free:
-----

             total       used       free     shared    buffers     cached
Mem:        771476     690436      81040          0     132968     289388
-/+ buffers/cache:     268080     503396
Swap:            0          0          0


dmesg:
------

usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[17182884.152000] usb-storage: Status code 0; transferred 31/31
[17182884.152000] usb-storage: -- transfer complete
[17182884.152000] usb-storage: Bulk command transfer result=0
[17182884.152000] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
[17182884.152000] usb-storage: Status code 0; transferred 18/18
[17182884.152000] usb-storage: -- transfer complete
[17182884.152000] usb-storage: Bulk data transfer result 0x0
[17182884.152000] usb-storage: Attempting to get CSW...
[17182884.152000] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[17182884.156000] usb-storage: Status code 0; transferred 13/13
[17182884.156000] usb-storage: -- transfer complete
[17182884.156000] usb-storage: Bulk status result = 0
[17182884.156000] usb-storage: Bulk Status S 0x53425355 T 0x90 R 0 Stat 0x0
[17182884.156000] usb-storage: -- Result from auto-sense is 0
[17182884.156000] usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[17182884.156000] usb-storage: Not Ready: Medium not present
[17182884.156000] usb-storage: scsi cmd done, result=0x2
[17182884.156000] usb-storage: *** thread sleeping.
[17182884.156000] usb-storage: queuecommand called
[17182884.156000] usb-storage: *** thread awakened.
[17182884.156000] usb-storage: Command TEST_UNIT_READY (6 bytes)
[17182884.156000] usb-storage:  00 20 00 00 00 00
[17182884.156000] usb-storage: Bulk Command S 0x43425355 T 0x91 L 0 F 0 Trg 0 LUN 1 CL 6
[17182884.156000] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[17182884.156000] usb-storage: Status code 0; transferred 31/31
[17182884.156000] usb-storage: -- transfer complete
[17182884.156000] usb-storage: Bulk command transfer result=0
[17182884.156000] usb-storage: Attempting to get CSW...
[17182884.156000] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[17182884.156000] usb-storage: Status code 0; transferred 13/13
[17182884.156000] usb-storage: -- transfer complete
[17182884.156000] usb-storage: Bulk status result = 0
[17182884.156000] usb-storage: Bulk Status S 0x53425355 T 0x91 R 0 Stat 0x1
[17182884.156000] usb-storage: -- transport indicates command failure
[17182884.156000] usb-storage: Issuing auto-REQUEST_SENSE
[17182884.156000] usb-storage: Bulk Command S 0x43425355 T 0x92 L 18 F 128 Trg 0 LUN 1 CL 6
[17182884.156000] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[17182884.160000] usb-storage: Status code 0; transferred 31/31
[17182884.160000] usb-storage: -- transfer complete
[17182884.160000] usb-storage: Bulk command transfer result=0
[17182884.160000] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
[17182884.160000] usb-storage: Status code 0; transferred 18/18
[17182884.160000] usb-storage: -- transfer complete
[17182884.160000] usb-storage: Bulk data transfer result 0x0
[17182884.160000] usb-storage: Attempting to get CSW...
[17182884.160000] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[17182884.160000] usb-storage: Status code 0; transferred 13/13
[17182884.160000] usb-storage: -- transfer complete
[17182884.160000] usb-storage: Bulk status result = 0
[17182884.160000] usb-storage: Bulk Status S 0x53425355 T 0x92 R 0 Stat 0x0
[17182884.160000] usb-storage: -- Result from auto-sense is 0
[17182884.160000] usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[17182884.160000] usb-storage: Not Ready: Medium not present
[17182884.160000] usb-storage: scsi cmd done, result=0x2
[17182884.160000] usb-storage: *** thread sleeping.
[17182884.160000] usb-storage: queuecommand called
[17182884.160000] usb-storage: *** thread awakened.
[17182884.160000] usb-storage: Command TEST_UNIT_READY (6 bytes)
[17182884.160000] usb-storage:  00 20 00 00 00 00
[17182884.160000] usb-storage: Bulk Command S 0x43425355 T 0x93 L 0 F 0 Trg 0 LUN 1 CL 6
[17182884.160000] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[17182884.164000] usb-storage: Status code 0; transferred 31/31
[17182884.164000] usb-storage: -- transfer complete
[17182884.164000] usb-storage: Bulk command transfer result=0
[17182884.164000] usb-storage: Attempting to get CSW...
[17182884.164000] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[17182884.164000] usb-storage: Status code 0; transferred 13/13
[17182884.164000] usb-storage: -- transfer complete
[17182884.164000] usb-storage: Bulk status result = 0
[17182884.164000] usb-storage: Bulk Status S 0x53425355 T 0x93 R 0 Stat 0x1
[17182884.164000] usb-storage: -- transport indicates command failure
[17182884.164000] usb-storage: Issuing auto-REQUEST_SENSE
[17182884.164000] usb-storage: Bulk Command S 0x43425355 T 0x94 L 18 F 128 Trg 0 LUN 1 CL 6
[17182884.164000] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[17182884.164000] usb-storage: Status code 0; transferred 31/31
[17182884.164000] usb-storage: -- transfer complete
[17182884.164000] usb-storage: Bulk command transfer result=0
[17182884.164000] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
[17182884.164000] usb-storage: Status code 0; transferred 18/18
[17182884.164000] usb-storage: -- transfer complete
[17182884.164000] usb-storage: Bulk data transfer result 0x0
[17182884.164000] usb-storage: Attempting to get CSW...
[17182884.164000] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[17182884.168000] usb-storage: Status code 0; transferred 13/13
[17182884.168000] usb-storage: -- transfer complete
[17182884.168000] usb-storage: Bulk status result = 0
[17182884.168000] usb-storage: Bulk Status S 0x53425355 T 0x94 R 0 Stat 0x0
[17182884.168000] usb-storage: -- Result from auto-sense is 0
[17182884.168000] usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[17182884.168000] usb-storage: Not Ready: Medium not present
[17182884.168000] usb-storage: scsi cmd done, result=0x2
[17182884.168000] usb-storage: *** thread sleeping.
[17182885.176000] usb-storage: queuecommand called
[17182885.176000] usb-storage: *** thread awakened.
[17182885.176000] usb-storage: Command TEST_UNIT_READY (6 bytes)
[17182885.176000] usb-storage:  00 20 00 00 00 00
[17182885.176000] usb-storage: Bulk Command S 0x43425355 T 0x95 L 0 F 0 Trg 0 LUN 1 CL 6
[17182885.176000] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[17182885.176000] usb-storage: Status code 0; transferred 31/31
[17182885.176000] usb-storage: -- transfer complete
[17182885.176000] usb-storage: Bulk command transfer result=0
[17182885.176000] usb-storage: Attempting to get CSW...
[17182885.176000] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[17182885.180000] usb-storage: Status code 0; transferred 13/13
[17182885.180000] usb-storage: -- transfer complete
[17182885.180000] usb-storage: Bulk status result = 0
[17182885.180000] usb-storage: Bulk Status S 0x53425355 T 0x95 R 0 Stat 0x1
[17182885.180000] usb-storage: -- transport indicates command failure
[17182885.180000] usb-storage: Issuing auto-REQUEST_SENSE
[17182885.180000] usb-storage: Bulk Command S 0x43425355 T 0x96 L 18 F 128 Trg 0 LUN 1 CL 6
[17182885.180000] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[17182885.180000] usb-storage: Status code 0; transferred 31/31
[17182885.180000] usb-storage: -- transfer complete
[17182885.180000] usb-storage: Bulk command transfer result=0
[17182885.180000] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
[17182885.180000] usb-storage: Status code 0; transferred 18/18
[17182885.180000] usb-storage: -- transfer complete
[17182885.180000] usb-storage: Bulk data transfer result 0x0
[17182885.180000] usb-storage: Attempting to get CSW...
[17182885.180000] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[17182885.180000] usb-storage: Status code 0; transferred 13/13
[17182885.180000] usb-storage: -- transfer complete
[17182885.180000] usb-storage: Bulk status result = 0
[17182885.180000] usb-storage: Bulk Status S 0x53425355 T 0x96 R 0 Stat 0x0
[17182885.180000] usb-storage: -- Result from auto-sense is 0
[17182885.180000] usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[17182885.180000] usb-storage: Not Ready: Medium not present
[17182885.180000] usb-storage: scsi cmd done, result=0x2
[17182885.180000] usb-storage: *** thread sleeping.
[17182885.180000] usb-storage: queuecommand called
[17182885.180000] usb-storage: *** thread awakened.
[17182885.180000] usb-storage: Command TEST_UNIT_READY (6 bytes)
[17182885.180000] usb-storage:  00 20 00 00 00 00
[17182885.180000] usb-storage: Bulk Command S 0x43425355 T 0x97 L 0 F 0 Trg 0 LUN 1 CL 6
[17182885.180000] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[17182885.184000] usb-storage: Status code 0; transferred 31/31
[17182885.184000] usb-storage: -- transfer complete
[17182885.184000] usb-storage: Bulk command transfer result=0
[17182885.184000] usb-storage: Attempting to get CSW...
[17182885.184000] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[17182885.184000] usb-storage: Status code 0; transferred 13/13
[17182885.184000] usb-storage: -- transfer complete
[17182885.184000] usb-storage: Bulk status result = 0
[17182885.184000] usb-storage: Bulk Status S 0x53425355 T 0x97 R 0 Stat 0x1
[17182885.184000] usb-storage: -- transport indicates command failure
[17182885.184000] usb-storage: Issuing auto-REQUEST_SENSE
[17182885.184000] usb-storage: Bulk Command S 0x43425355 T 0x98 L 18 F 128 Trg 0 LUN 1 CL 6
[17182885.184000] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[17182885.184000] usb-storage: Status code 0; transferred 31/31
[17182885.184000] usb-storage: -- transfer complete
[17182885.184000] usb-storage: Bulk command transfer result=0
[17182885.184000] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
[17182885.184000] usb-storage: Status code 0; transferred 18/18
[17182885.184000] usb-storage: -- transfer complete
[17182885.184000] usb-storage: Bulk data transfer result 0x0
[17182885.184000] usb-storage: Attempting to get CSW...
[17182885.184000] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[17182885.188000] usb-storage: Status code 0; transferred 13/13
[17182885.188000] usb-storage: -- transfer complete
[17182885.188000] usb-storage: Bulk status result = 0
[17182885.188000] usb-storage: Bulk Status S 0x53425355 T 0x98 R 0 Stat 0x0
[17182885.188000] usb-storage: -- Result from auto-sense is 0
[17182885.188000] usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[17182885.188000] usb-storage: Not Ready: Medium not present
[17182885.188000] usb-storage: scsi cmd done, result=0x2
[17182885.188000] usb-storage: *** thread sleeping.
[17182885.188000] usb-storage: queuecommand called
[17182885.188000] usb-storage: *** thread awakened.
[17182885.188000] usb-storage: Command TEST_UNIT_READY (6 bytes)
[17182885.188000] usb-storage:  00 20 00 00 00 00
[17182885.188000] usb-storage: Bulk Command S 0x43425355 T 0x99 L 0 F 0 Trg 0 LUN 1 CL 6
[17182885.188000] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[17182885.188000] usb-storage: Status code 0; transferred 31/31
[17182885.188000] usb-storage: -- transfer complete
[17182885.188000] usb-storage: Bulk command transfer result=0
[17182885.188000] usb-storage: Attempting to get CSW...
[17182885.188000] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[17182885.188000] usb-storage: Status code 0; transferred 13/13
[17182885.188000] usb-storage: -- transfer complete
[17182885.188000] usb-storage: Bulk status result = 0
[17182885.188000] usb-storage: Bulk Status S 0x53425355 T 0x99 R 0 Stat 0x1
[17182885.188000] usb-storage: -- transport indicates command failure
[17182885.188000] usb-storage: Issuing auto-REQUEST_SENSE
[17182885.188000] usb-storage: Bulk Command S 0x43425355 T 0x9a L 18 F 128 Trg 0 LUN 1 CL 6
[17182885.188000] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[17182885.188000] usb-storage: Status code 0; transferred 31/31
[17182885.188000] usb-storage: -- transfer complete
[17182885.188000] usb-storage: Bulk command transfer result=0
[17182885.188000] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
[17182885.192000] usb-storage: Status code 0; transferred 18/18
[17182885.192000] usb-storage: -- transfer complete
[17182885.192000] usb-storage: Bulk data transfer result 0x0
[17182885.192000] usb-storage: Attempting to get CSW...
[17182885.192000] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[17182885.192000] usb-storage: Status code 0; transferred 13/13
[17182885.192000] usb-storage: -- transfer complete
[17182885.192000] usb-storage: Bulk status result = 0
[17182885.192000] usb-storage: Bulk Status S 0x53425355 T 0x9a R 0 Stat 0x0
[17182885.192000] usb-storage: -- Result from auto-sense is 0
[17182885.192000] usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[17182885.192000] usb-storage: Not Ready: Medium not present
[17182885.192000] usb-storage: scsi cmd done, result=0x2
[17182885.192000] usb-storage: *** thread sleeping.
[17182885.192000] usb-storage: queuecommand called
[17182885.192000] usb-storage: *** thread awakened.
[17182885.192000] usb-storage: Command TEST_UNIT_READY (6 bytes)
[17182885.192000] usb-storage:  00 20 00 00 00 00
[17182885.192000] usb-storage: Bulk Command S 0x43425355 T 0x9b L 0 F 0 Trg 0 LUN 1 CL 6
[17182885.192000] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[17182885.192000] usb-storage: Status code 0; transferred 31/31
[17182885.192000] usb-storage: -- transfer complete
[17182885.192000] usb-storage: Bulk command transfer result=0
[17182885.192000] usb-storage: Attempting to get CSW...
[17182885.192000] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[17182885.192000] usb-storage: Status code 0; transferred 13/13
[17182885.192000] usb-storage: -- transfer complete
[17182885.192000] usb-storage: Bulk status result = 0
[17182885.192000] usb-storage: Bulk Status S 0x53425355 T 0x9b R 0 Stat 0x1
[17182885.192000] usb-storage: -- transport indicates command failure
[17182885.192000] usb-storage: Issuing auto-REQUEST_SENSE
[17182885.192000] usb-storage: Bulk Command S 0x43425355 T 0x9c L 18 F 128 Trg 0 LUN 1 CL 6
[17182885.192000] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[17182885.196000] usb-storage: Status code 0; transferred 31/31
[17182885.196000] usb-storage: -- transfer complete
[17182885.196000] usb-storage: Bulk command transfer result=0
[17182885.196000] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
[17182885.196000] usb-storage: Status code 0; transferred 18/18
[17182885.196000] usb-storage: -- transfer complete
[17182885.196000] usb-storage: Bulk data transfer result 0x0
[17182885.196000] usb-storage: Attempting to get CSW...
[17182885.196000] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[17182885.196000] usb-storage: Status code 0; transferred 13/13
[17182885.196000] usb-storage: -- transfer complete
[17182885.196000] usb-storage: Bulk status result = 0
[17182885.196000] usb-storage: Bulk Status S 0x53425355 T 0x9c R 0 Stat 0x0
[17182885.196000] usb-storage: -- Result from auto-sense is 0
[17182885.196000] usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[17182885.196000] usb-storage: Not Ready: Medium not present
[17182885.196000] usb-storage: scsi cmd done, result=0x2
[17182885.196000] usb-storage: *** thread sleeping.
[17182886.144000] usb 2-2.2: USB disconnect, address 7
[17182886.144000] usb-storage: storage_disconnect() called
[17182886.144000] usb-storage: usb_stor_stop_transport called
[17182886.148000] usb-storage: -- usb_stor_release_resources
[17182886.148000] usb-storage: -- sending exit command to thread
[17182886.148000] usb-storage: -- dissociate_dev
[17182886.148000] usb-storage: *** thread awakened.
[17182886.148000] usb-storage: -- exiting


### EOF
### vim:tw=256:et:sts=2:st=2:sw=2:com+=b\:###:fo+=cqtr:tags=ctags:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux