This removes all the leading whitespace kconfig now warns about.
Signed-off-by: Roman Zippel <[email protected]>
---
drivers/mtd/Kconfig | 4 ++--
drivers/mtd/maps/Kconfig | 2 +-
drivers/scsi/Kconfig | 10 +++++-----
drivers/scsi/qla2xxx/Kconfig | 12 ++++++------
sound/oss/Kconfig | 2 +-
5 files changed, 15 insertions(+), 15 deletions(-)
Index: linux-2.6-git/drivers/mtd/Kconfig
===================================================================
--- linux-2.6-git.orig/drivers/mtd/Kconfig
+++ linux-2.6-git/drivers/mtd/Kconfig
@@ -86,14 +86,14 @@ config MTD_REDBOOT_DIRECTORY_BLOCK
block and "-2" means the penultimate block.
config MTD_REDBOOT_PARTS_UNALLOCATED
- bool " Include unallocated flash regions"
+ bool "Include unallocated flash regions"
depends on MTD_REDBOOT_PARTS
help
If you need to register each unallocated flash region as a MTD
'partition', enable this option.
config MTD_REDBOOT_PARTS_READONLY
- bool " Force read-only for RedBoot system images"
+ bool "Force read-only for RedBoot system images"
depends on MTD_REDBOOT_PARTS
help
If you need to force read-only for 'RedBoot', 'RedBoot Config' and
Index: linux-2.6-git/drivers/mtd/maps/Kconfig
===================================================================
--- linux-2.6-git.orig/drivers/mtd/maps/Kconfig
+++ linux-2.6-git/drivers/mtd/maps/Kconfig
@@ -212,7 +212,7 @@ config MTD_NETtel
Support for flash chips on NETtel/SecureEdge/SnapGear boards.
config MTD_ALCHEMY
- tristate ' AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support'
+ tristate "AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support"
depends on SOC_AU1X00
help
Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
Index: linux-2.6-git/drivers/scsi/Kconfig
===================================================================
--- linux-2.6-git.orig/drivers/scsi/Kconfig
+++ linux-2.6-git/drivers/scsi/Kconfig
@@ -1156,7 +1156,7 @@ config SCSI_NCR_Q720
you do not have this SCSI card, so say N.
config SCSI_NCR53C8XX_DEFAULT_TAGS
- int " default tagged command queue depth"
+ int "default tagged command queue depth"
depends on SCSI_ZALON || SCSI_NCR_Q720
default "8"
---help---
@@ -1182,7 +1182,7 @@ config SCSI_NCR53C8XX_DEFAULT_TAGS
There is no safe option other than using good SCSI devices.
config SCSI_NCR53C8XX_MAX_TAGS
- int " maximum number of queued commands"
+ int "maximum number of queued commands"
depends on SCSI_ZALON || SCSI_NCR_Q720
default "32"
---help---
@@ -1199,7 +1199,7 @@ config SCSI_NCR53C8XX_MAX_TAGS
There is no safe option and the default answer is recommended.
config SCSI_NCR53C8XX_SYNC
- int " synchronous transfers frequency in MHz"
+ int "synchronous transfers frequency in MHz"
depends on SCSI_ZALON || SCSI_NCR_Q720
default "20"
---help---
@@ -1233,7 +1233,7 @@ config SCSI_NCR53C8XX_SYNC
terminations and SCSI conformant devices.
config SCSI_NCR53C8XX_PROFILE
- bool " enable profiling"
+ bool "enable profiling"
depends on SCSI_ZALON || SCSI_NCR_Q720
help
This option allows you to enable profiling information gathering.
@@ -1244,7 +1244,7 @@ config SCSI_NCR53C8XX_PROFILE
The normal answer therefore is N.
config SCSI_NCR53C8XX_NO_DISCONNECT
- bool " not allow targets to disconnect"
+ bool "not allow targets to disconnect"
depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0
help
This option is only provided for safety if you suspect some SCSI
Index: linux-2.6-git/drivers/scsi/qla2xxx/Kconfig
===================================================================
--- linux-2.6-git.orig/drivers/scsi/qla2xxx/Kconfig
+++ linux-2.6-git/drivers/scsi/qla2xxx/Kconfig
@@ -30,7 +30,7 @@ config SCSI_QLA_FC
be removed from the kernel sources.
config SCSI_QLA2XXX_EMBEDDED_FIRMWARE
- bool " Use firmware-loader modules (DEPRECATED)"
+ bool "Use firmware-loader modules (DEPRECATED)"
depends on SCSI_QLA_FC
help
This option offers you the deprecated firmware-loader
@@ -38,33 +38,33 @@ config SCSI_QLA2XXX_EMBEDDED_FIRMWARE
Firmware Loader interface in the qla2xxx driver.
config SCSI_QLA21XX
- tristate " Build QLogic ISP2100 firmware-module"
+ tristate "Build QLogic ISP2100 firmware-module"
depends on SCSI_QLA_FC && SCSI_QLA2XXX_EMBEDDED_FIRMWARE
---help---
This driver supports the QLogic 21xx (ISP2100) host adapter family.
config SCSI_QLA22XX
- tristate " Build QLogic ISP2200 firmware-module"
+ tristate "Build QLogic ISP2200 firmware-module"
depends on SCSI_QLA_FC && SCSI_QLA2XXX_EMBEDDED_FIRMWARE
---help---
This driver supports the QLogic 22xx (ISP2200) host adapter family.
config SCSI_QLA2300
- tristate " Build QLogic ISP2300/ISP6312 firmware-module"
+ tristate "Build QLogic ISP2300/ISP6312 firmware-module"
depends on SCSI_QLA_FC && SCSI_QLA2XXX_EMBEDDED_FIRMWARE
---help---
This driver supports the QLogic 2300 (ISP2300, ISP2312 and
ISP6312) host adapter family.
config SCSI_QLA2322
- tristate " Build QLogic ISP2322/ISP6322 firmware-module"
+ tristate "Build QLogic ISP2322/ISP6322 firmware-module"
depends on SCSI_QLA_FC && SCSI_QLA2XXX_EMBEDDED_FIRMWARE
---help---
This driver supports the QLogic 2322 (ISP2322 and ISP6322) host
adapter family.
config SCSI_QLA24XX
- tristate " Build QLogic ISP24xx firmware-module"
+ tristate "Build QLogic ISP24xx firmware-module"
depends on SCSI_QLA_FC && SCSI_QLA2XXX_EMBEDDED_FIRMWARE
---help---
This driver supports the QLogic 24xx (ISP2422 and ISP2432) host
Index: linux-2.6-git/sound/oss/Kconfig
===================================================================
--- linux-2.6-git.orig/sound/oss/Kconfig
+++ linux-2.6-git/sound/oss/Kconfig
@@ -1130,6 +1130,6 @@ config SOUND_SH_DAC_AUDIO
depends on SOUND_PRIME && CPU_SH3
config SOUND_SH_DAC_AUDIO_CHANNEL
- int " DAC channel"
+ int "DAC channel"
default "1"
depends on SOUND_SH_DAC_AUDIO
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
