I've already posted same bug some weeks ago.
this is just a reminder and to confirm bug is still there.
00:0b.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
Alsa driver: 1370
1) if builtin in kernel, on resume it doesn't work any more.
2) if built as module on resume it works with no need to remove/readd
module.
in both situations dmesg shows:
pnp: Failed to activate device 00:0b.
Stopping tasks: ===========================================|
Shrinking memory... done (39214 pages freed)
pnp: Device 00:0c disabled.
pnp: Device 00:08 disabled.
swsusp: Need to copy 13752 pages
ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 9 (level, low)
-> IRQ 9
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 9 (level, low)
-> IRQ 9
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 9 (level, low)
-> IRQ 9
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKD] -> GSI 9 (level, low)
-> IRQ 9
ACPI: PCI Interrupt 0000:00:0a.2[C] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level,
low) -> IRQ 10
pnp: Device 00:08 activated.
pnp: Failed to activate device 00:0b.
pnp: Device 00:0c activated.
Restarting tasks... done
agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode
lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge (rev 03)
00:04.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:04.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:04.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:04.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
(rev 74)
00:0a.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 50)
00:0a.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 50)
00:0a.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
00:0b.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF/SG AGP
dmesg says 00:08 and 00:0c are activated..but i've no idea which devices
they are, lspci -vv shows nothing about that.
Ready to give more infos and test patches.
Patrizio Bassi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]