Re: [2.6.16] saa7134 disable_ir oops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sergey Vlasov wrote:
On Fri, 24 Mar 2006 14:00:46 -0800 David Liontooth wrote:

On 2.6.16 mainline, I get an oops when inserting the saa7134 module with the option "disable_ir=1", whether for a single card or several.

Gigabyte K8NS Ultra-939, LifeView FlyVideo-3000FM NTSC, athlon64 x2 3800+, Debian sid. All four cards work great otherwise. The new saa7134-alsa does not appear to be involved in the oops.

Issued:

sudo modprobe saa7134 card=2,2,2,2 tuner=43,43,43,43 video_nr=1,2,3,4
vbi_nr=1,2,3,4 radio_nr=1,2,3,4 alsa=1,1,1,1 disable_ir=1,1,1,1
sudo modprobe saa7134-alsa index=1,2,3,4

Got in dmesg:

Unable to handle kernel NULL pointer dereference at 0000000000000260 RIP:
<ffffffff880d5a95>{:saa7134:saa7134_initdev+1452}
PGD 3e607067 PUD 3b0b6067 PMD 0
Oops: 0000 [1] SMP
CPU 0
Modules linked in: saa7134 video_buf compat_ioctl32 v4l2_common
v4l1_compat ir_kbd_i2c ir_common videodev xfs exportfs snd_intel8x0
snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd soundcore sk98lin
snd_page_alloc psmouse pcspkr evdev parport_pc parport ehci_hcd
i2c_nforce2 ohci_hcd i2c_core unix
Pid: 7134, comm: modprobe Not tainted 2.6.16 #1
RIP: 0010:[<ffffffff880d5a95>]
<ffffffff880d5a95>{:saa7134:saa7134_initdev+1452}
[skip]

Other people algo get oops with disable_ir=1:

http://lkml.org/lkml/2006/2/20/122

Does the following patch fix things?
The patch fixes the oops -- thank you! Yet the ir modules get loaded in spite of the "disable_ir=1" parameter:

# sudo modprobe -vvv saa7134 card=2 tuner=43 disable_ir=1
insmod /lib/modules/2.6.16/kernel/drivers/media/common/ir-common.ko
insmod /lib/modules/2.6.16/kernel/drivers/media/video/ir-kbd-i2c.ko
insmod /lib/modules/2.6.16/kernel/drivers/media/video/video-buf.ko
insmod /lib/modules/2.6.16/kernel/drivers/media/video/saa7134/saa7134.ko card=2 tuner=43 disable_ir=1

David
---

saa7134: Fix oops with disable_ir=1

When disable_ir=1 parameter is used, or when saa7134_input_init1()
fails for any other reason, dev->remote will remain NULL, and the
driver will oops in saa7134_hwinit2().  Therefore dev->remote must be
checked before dereferencing.

Signed-off-by: Sergey Vlasov <[email protected]>

--- linux-2.6.16.orig/drivers/media/video/saa7134/saa7134-core.c	2006-03-20 08:53:29 +0300
+++ linux-2.6.16/drivers/media/video/saa7134/saa7134-core.c	2006-04-06 20:00:56 +0400
@@ -543,6 +543,8 @@ static irqreturn_t saa7134_irq(int irq, if (report & SAA7134_IRQ_REPORT_GPIO16) {
 			switch (dev->has_remote) {
 				case SAA7134_REMOTE_GPIO:
+					if (!dev->remote)
+						break;
 					if  (dev->remote->mask_keydown & 0x10000) {
 						saa7134_input_irq(dev);
 					}
@@ -559,6 +561,8 @@ static irqreturn_t saa7134_irq(int irq, if (report & SAA7134_IRQ_REPORT_GPIO18) {
 			switch (dev->has_remote) {
 				case SAA7134_REMOTE_GPIO:
+					if (!dev->remote)
+						break;
 					if ((dev->remote->mask_keydown & 0x40000) ||
 					    (dev->remote->mask_keyup & 0x40000)) {
 						saa7134_input_irq(dev);
@@ -671,7 +675,7 @@ static int saa7134_hwinit2(struct saa713
 		SAA7134_IRQ2_INTE_PE      |
 		SAA7134_IRQ2_INTE_AR;
- if (dev->has_remote == SAA7134_REMOTE_GPIO) {
+	if (dev->has_remote == SAA7134_REMOTE_GPIO && dev->remote) {
 		if (dev->remote->mask_keydown & 0x10000)
 			irq2_mask |= SAA7134_IRQ2_INTE_GPIO16;
 		else if (dev->remote->mask_keydown & 0x40000)



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux