1. One line summary: On x86, sound applications oops when I refresh the browser. 2. Full description: I'm seeing oopses from the sound applications (audacious, also a realplayer binary) when I open firefox or refresh a tab. At first, I didn't realise it was the browser, so I spent some time just playing sound without problems. Then I happened to refresh the current tab in firefox and it happened again. After rebooting, it is trivially easy to cause by starting to play a sound file and then opening firefox or refreshing an open tab. Remaining data follows, config is attached. Ken 3. Keywords: alsa snd_via82xxx 4. Kernel Version: 2.6.17-rc1 5. Most recent version without the bug: 2.6.16.1 6. Oops message: This is the latest, I rebooted after each previous oops. Apr 3 21:14:26 ac30 kernel: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000098 Apr 3 21:14:26 ac30 kernel: printing eip: Apr 3 21:14:26 ac30 kernel: c02c627c Apr 3 21:14:26 ac30 kernel: *pde = 00000000 Apr 3 21:14:26 ac30 kernel: Oops: 0000 [#1] Apr 3 21:14:26 ac30 kernel: Modules linked in: via_velocity crc_ccitt Apr 3 21:14:26 ac30 kernel: CPU: 0 Apr 3 21:14:26 ac30 kernel: EIP: 0060:[<c02c627c>] Not tainted VLI Apr 3 21:14:26 ac30 kernel: EFLAGS: 00010046 (2.6.17-rc1 #1) Apr 3 21:14:26 ac30 kernel: EIP is at snd_pcm_oss_poll+0x4e/0x192 Apr 3 21:14:26 ac30 kernel: eax: f4ef1201 ebx: c1a92480 ecx: 000000a4 edx: c02c6200 Apr 3 21:14:26 ac30 kernel: esi: 00000000 edi: 00000000 ebp: 00000000 esp: f4e54b5c Apr 3 21:14:26 ac30 kernel: ds: 007b es: 007b ss: 0068 Apr 3 21:14:26 ac30 kernel: Process audacious (pid: 3105, threadinfo=f4e54000 task=f4e9a030) Apr 3 21:14:26 ac30 kernel: Stack: <0>f4ef12c0 00000000 ffff537e 00000000 00200200 00000000 f351e240 00000009 Apr 3 21:14:26 ac30 kernel: 00000200 c0150883 f351e240 00000000 ffccddec 00000000 f4e54e58 f4e54e5c Apr 3 21:14:26 ac30 kernel: f4e54e60 f4e54e50 f4e54e54 f4e54e58 00000000 00000200 00000000 00000200 Apr 3 21:14:26 ac30 kernel: Call Trace: Apr 3 21:14:26 ac30 kernel: <c0150883> do_select+0x268/0x41e <c0150564> __pollwait+0x0/0xb7 Apr 3 21:14:26 ac30 kernel: <c01109a4> default_wake_function+0x0/0x15 <c010426e> do_IRQ+0x48/0x50 Apr 3 21:14:26 ac30 kernel: <c0102b82> common_interrupt+0x1a/0x20 <c010a7e1> delay_pmtmr+0xd/0x15 Apr 3 21:14:26 ac30 kernel: <c02d7d5f> snd_via82xx_codec_read+0xe1/0xf2 <c010426e> do_IRQ+0x48/0x50 Apr 3 21:14:26 ac30 kernel: <c0102b82> common_interrupt+0x1a/0x20 <c02d7d88> snd_via82xx_codec_ready+0x18/0x53 Apr 3 21:14:26 ac30 kernel: <c02bdbb6> snd_pcm_update_hw_ptr+0x14d/0x15b <c02ba828> snd_pcm_common_ioctl1+0x7d8/0xc9d Apr 3 21:14:26 ac30 kernel: <c033c54c> __mutex_unlock_slowpath+0x10d/0x134 <c02bacb7> snd_pcm_common_ioctl1+0xc67/0xc9d Apr 3 21:14:26 ac30 kernel: <c0150c1c> core_sys_select+0x1e3/0x2ac <c010426e> do_IRQ+0x48/0x50 Apr 3 21:14:26 ac30 kernel: <c01d8503> copy_from_user+0x3c/0x6e <c02bc069> snd_pcm_lib_write_transfer+0x5b/0x70 Apr 3 21:14:26 ac30 kernel: <c02be241> snd_pcm_lib_write1+0x284/0x37d <c02bb38f> snd_pcm_playback_ioctl1+0x33f/0x355 Apr 3 21:14:26 ac30 kernel: <c01d8721> copy_to_user+0x3c/0x57 <c02c71eb> snd_pcm_oss_ioctl+0x8dc/0x995 Apr 3 21:14:26 ac30 kernel: <c0150fd6> sys_select+0x9a/0x164 <c01500b9> sys_ioctl+0x2b/0x46 Apr 3 21:14:26 ac30 kernel: <c010294f> sysenter_past_esp+0x54/0x75 Apr 3 21:14:26 ac30 kernel: Code: db 0f 84 9e 00 00 00 8b 7b 5c 85 ed 0f 95 c2 89 f9 81 c1 a4 00 00 00 0f 95 c0 84 d0 74 0c 55 51 ff 74 24 30 ff 55 00 83 c4 0c fa <8b> 97 98 00 00 00 8b 02 83 f8 05 74 5a 8b 02 83 f8 03 75 5d 8b 7. How to trigger: play sound, then open or refresh firefox. 8. Environment: ken@ac30 ~ $cat ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux ac30 2.6.17-rc1 #1 Mon Apr 3 17:58:39 BST 2006 i686 athlon-4 i386 GNU/Linux Gnu C 4.0.3 Gnu make 3.80 binutils 2.16.1 util-linux 2.12r mount 2.12r module-init-tools 3.2.2 e2fsprogs 1.38 reiserfsprogs line reiser4progs line Linux C Library 2.3.6 Dynamic linker (ldd) 2.3.6 Linux C++ Library 6.0.7 Procps 3.2.6 Kbd 1.12 Sh-utils 5.94 udev 088 Modules Loaded via_velocity crc_ccitt ken@ac30 ~ $cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 39 model name : AMD Athlon(tm) 64 Processor 4000+ stepping : 1 cpu MHz : 2451.950 cache size : 1024 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts fid vid ttp tm stc bogomips : 4909.80 ken@ac30 ~ $cat /proc/modules via_velocity 25632 - - Live 0xf98e7000 crc_ccitt 1592 - - Live 0xf8874000 ken@ac30 ~ $cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 0376-0376 : ide1 03c0-03df : vga+ 03f8-03ff : serial 4000-407f : motherboard 4000-4003 : PM1a_EVT_BLK 4004-4005 : PM1a_CNT_BLK 4008-400b : PM_TMR 4020-4023 : GPE0_BLK 5000-500f : motherboard a000-afff : PCI Bus #01 a000-a0ff : 0000:01:00.0 b000-b07f : 0000:00:07.0 b400-b4ff : 0000:00:0e.0 b400-b4ff : via-velocity b800-b807 : 0000:00:0f.0 b800-b807 : sata_via bc00-bc03 : 0000:00:0f.0 bc00-bc03 : sata_via c000-c007 : 0000:00:0f.0 c000-c007 : sata_via c400-c403 : 0000:00:0f.0 c400-c403 : sata_via c800-c80f : 0000:00:0f.0 c800-c80f : sata_via cc00-ccff : 0000:00:0f.0 cc00-ccff : sata_via d000-d00f : 0000:00:0f.1 d000-d007 : ide0 d008-d00f : ide1 d400-d41f : 0000:00:10.0 d400-d41f : uhci_hcd d800-d81f : 0000:00:10.1 d800-d81f : uhci_hcd dc00-dc1f : 0000:00:10.2 dc00-dc1f : uhci_hcd e000-e01f : 0000:00:10.3 e000-e01f : uhci_hcd e400-e4ff : 0000:00:11.5 e400-e4ff : VIA8237 ken@ac30 ~ $cat /proc/iomem 00000000-0009efff : System RAM 0009f000-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cbfff : Video ROM 000f0000-000fffff : System ROM 00100000-3ffeffff : System RAM 00100000-0033db90 : Kernel code 0033db91-0041229f : Kernel data 3fff0000-3fff2fff : ACPI Non-volatile Storage 3fff3000-3fffffff : ACPI Tables 50000000-5001ffff : 0000:00:0e.0 e8000000-efffffff : 0000:00:00.0 e8000000-efffffff : aperture f0000000-f7ffffff : PCI Bus #01 f0000000-f7ffffff : 0000:01:00.0 f0000000-f7ffffff : radeonfb framebuffer f8000000-f80fffff : PCI Bus #01 f8000000-f801ffff : 0000:01:00.0 f8020000-f802ffff : 0000:01:00.0 f8020000-f802ffff : radeonfb mmio f8120000-f81200ff : 0000:00:0e.0 f8120000-f81200ff : via-velocity f8121000-f81217ff : 0000:00:07.0 f8121000-f81217ff : ohci1394 f8122000-f81220ff : 0000:00:10.4 f8122000-f81220ff : ehci_hcd fec00000-fec00fff : reserved fee00000-fee00fff : reserved ffff0000-ffffffff : reserved ken@ac30 ~ $cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD740GD-00FL Rev: 33.0 Type: Direct-Access ANSI SCSI revision: 05 output from lspci: 00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge Subsystem: ABIT Computer Corp. Unknown device 1415 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 8 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] Capabilities: [80] AGP version 3.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1 Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] HyperTransport: Slave or Primary Interface !!! Possibly incomplete decoding Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit Revision ID: 1.02 Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration 00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: f8000000-f80fffff Prefetchable memory behind bridge: f0000000-f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) (prog-if 10 [OHCI]) Subsystem: ABIT Computer Corp. Unknown device 1415 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at f8121000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at b000 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0e.0 Ethernet controller: VIA Technologies, Inc. VT6120/VT6121/VT6122 Gigabit Ethernet Adapter (rev 11) Subsystem: ABIT Computer Corp. Unknown device 1415 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (750ns min, 2000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at b400 [size=256] Region 1: Memory at f8120000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at 50000000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) Subsystem: ABIT Computer Corp. Unknown device 1415 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin B routed to IRQ 11 Region 0: I/O ports at b800 [size=8] Region 1: I/O ports at bc00 [size=4] Region 2: I/O ports at c000 [size=8] Region 3: I/O ports at c400 [size=4] Region 4: I/O ports at c800 [size=16] Region 5: I/O ports at cc00 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: ABIT Computer Corp. Unknown device 1415 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at d000 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp. Unknown device 1415 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp. Unknown device 1415 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at d800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp. Unknown device 1415 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at dc00 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp. Unknown device 1415 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at e000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI]) Subsystem: ABIT Computer Corp. Unknown device 1415 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size 10 Interrupt: pin C routed to IRQ 11 Region 0: Memory at f8122000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] Subsystem: ABIT Computer Corp. Unknown device 1415 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) Subsystem: ABIT Computer Corp. Unknown device 1415 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 11 Region 0: I/O ports at e400 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW [Radeon 7500] (prog-if 00 [VGA]) Subsystem: Hightech Information System Ltd. Unknown device 0207 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min) Interrupt: pin A routed to IRQ 11 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at a000 [size=256] Region 2: Memory at f8020000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at f8000000 [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1 Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- -- das eine Mal als Tragödie, das andere Mal als Farce
Attachment:
config-2.6.17-rc1.bz2
Description: Binary data
- Follow-Ups:
- Slab corruptions & Re: 2.6.17-rc1: Oops in sound applications
- From: Jan Niehusmann <[email protected]>
- Slab corruptions & Re: 2.6.17-rc1: Oops in sound applications
- Prev by Date: 2.6.16 error on a 8 core system
- Next by Date: Re: lkml traffic (was:: [PATCH] unify PFN_* macros)
- Previous by thread: 2.6.16 error on a 8 core system
- Next by thread: Slab corruptions & Re: 2.6.17-rc1: Oops in sound applications
- Index(es):
![]() |