Hi I was wondering if the patch for sata_nv to hanlde the lost interrupts has been submitted for inclussion in the kernel. I have sort of been following this thread, were it seems that the interrupt problem has been fixed, but they were also going to fix the adma problem as well. I did a quick check of 2.6.16 changelog and see no mention for sata_nv. I seem to suffere from this issue quite often - doing dvd burns across a network..... Thanks On Mon, Mar 27, 2006 at 05:00:53PM -0500, Matt Heler wrote: > I forgot to include this.. but here's my bios version > > Vendor: Phoenix Technologies, LTD > Version: 6.00 PG > Release Date: 06/23/2005 > > On Monday 27 March 2006 4:46 pm, Matt Heler wrote: > > Hey Bill, > > > > I spoke abit to soon though regarding that stability.. After booting up X > > and running Azerues and kde, my system stalled and locked. However it > > lasted much longer then Jeff's version. > > > > I'm running the DFI Lanparty with an Athlon 4400. I also have the following > > setup > > > > 2x300gb seagate drives 7200.8 in a raid0 format with ext3 > > 2x400gb seagate drives 7200.9 again in a raid0 format with ext3 > > > > and lspci gives me the following :: > > > > 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) > > 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev > > a3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller > > (rev a3) > > > > On Monday 27 March 2006 11:08 am, Bill Rugolsky Jr. wrote: > > > On Sun, Mar 26, 2006 at 08:14:35PM -0500, Matt Heler wrote: > > > > Using Bill's original patch I was able to boot up perfectly with adma > > > > support enabled on my workstation. Even after several stress tests ( > > > > tar -cf /dev/null . , and dd if=/dev/sda of=/dev/null ), everything > > > > seems to be a-ok. However when I tried the sata_nv.c file that you sent > > > > to Bill, I kept on getting hardlocks, and thus was unable to stress > > > > test your version. > > > > > > > > Also for note, I heve not received any of the timeout problems reported > > > > by Bill. Nor have I had any latency problems with adma enabled. > > > > > > Matt, > > > > > > Nice to see some value falling out of this sata_nv thread. Did you see > > > latency problems before enabling ADMA? > > > > > > Would you provide some specifics on your setup? > > > > > > Which motherboard, #CPUs, BIOS revision, kernel, MD/LVM2/fs? > > > > > > On two of my Tyan S2895 machines, including the one that I'm using for > > > testing, lspci says: > > > > > > 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) > > > 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller > > > (rev f3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA > > > Controller (rev f3) > > > > > > and dmidecode says: > > > > > > BIOS Information > > > Vendor: Phoenix Technologies Ltd. > > > Version: 2004Q3 > > > Release Date: 10/12/2005 > > > > > > The other, where I first had lost tick problems, says: > > > > > > 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) > > > 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller > > > (rev a3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA > > > Controller (rev a3) > > > > > > BIOS Information > > > Vendor: Phoenix Technologies Ltd. > > > Version: 2004Q3 > > > Release Date: 06/07/2005 > > > > > > > > > Thanks, > > > > > > Bill > > > > - > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > the body of a message to [email protected] > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ >
Attachment:
signature.asc
Description: Digital signature
- References:
- [PATCH][INCOMPLETE] sata_nv: merge ADMA support
- From: "Bill Rugolsky Jr." <[email protected]>
- Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
- From: "Bill Rugolsky Jr." <[email protected]>
- Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
- From: Matt Heler <[email protected]>
- Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
- From: Matt Heler <[email protected]>
- [PATCH][INCOMPLETE] sata_nv: merge ADMA support
- Prev by Date: Re: Correction: 2.6.16-git12 killed networking -- 3c900 card
- Next by Date: Re: [spi-devel-general] SPI bus driver synchronous support
- Previous by thread: Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
- Next by thread: [PATCH 1/14] RTC: Remove RTC UIP synchronization on x86
- Index(es):