This small patch gets rid of some magic numbers in the i2c parport
drivers, specifically wrt the control and status handling, using the
symbols already defined in parport.h
The patch produces the same binary objects for i2c-parport.c and
i2c-parport-simple.c as before.
Please apply.
Cheers,
Christopher.
[email protected]
[email protected]
Only in linux-2.6.16: .config
diff --exclude=scripts --exclude='*~' -aurp linux-2.6.16/drivers/i2c/busses/i2c-parport.h linux-2.6.16.i2c/drivers/i2c/busses/i2c-parport.h
--- linux-2.6.16/drivers/i2c/busses/i2c-parport.h 2006-03-19 21:53:29.000000000 -0800
+++ linux-2.6.16.i2c/drivers/i2c/busses/i2c-parport.h 2006-03-22 23:51:08.000000000 -0800
@@ -18,6 +18,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
+#include <linux/parport.h>
+
#ifdef DATA
#undef DATA
#endif
@@ -40,53 +42,62 @@ struct adapter_parm {
struct lineop init;
};
+#define LINEOP_DATA(val_, inverted_) \
+ { .val=(val_), .port = DATA, .inverted=(inverted_) }
+
+#define LINEOP_STATUS(val_, inverted_) \
+ { .val=(val_), .port = STAT, .inverted=(inverted_) }
+
+#define LINEOP_CONTROL(val_, inverted_) \
+ { .val=(val_), .port = CTRL, .inverted=(inverted_) }
+
static struct adapter_parm adapter_parm[] = {
/* type 0: Philips adapter */
{
- .setsda = { 0x80, DATA, 1 },
- .setscl = { 0x08, CTRL, 0 },
- .getsda = { 0x80, STAT, 0 },
- .getscl = { 0x08, STAT, 0 },
+ .setsda = LINEOP_DATA(0x80, 1),
+ .setscl = LINEOP_CONTROL(PARPORT_CONTROL_SELECT, 0),
+ .getsda = LINEOP_STATUS(PARPORT_STATUS_BUSY, 0),
+ .getscl = LINEOP_STATUS(PARPORT_STATUS_ERROR, 0)
},
/* type 1: home brew teletext adapter */
{
- .setsda = { 0x02, DATA, 0 },
- .setscl = { 0x01, DATA, 0 },
- .getsda = { 0x80, STAT, 1 },
+ .setsda = LINEOP_DATA(0x02, 0),
+ .setscl = LINEOP_DATA(0x01, 0),
+ .getsda = LINEOP_STATUS(PARPORT_STATUS_BUSY, 1)
},
/* type 2: Velleman K8000 adapter */
{
- .setsda = { 0x02, CTRL, 1 },
- .setscl = { 0x08, CTRL, 1 },
- .getsda = { 0x10, STAT, 0 },
+ .setsda = LINEOP_CONTROL(PARPORT_CONTROL_AUTOFD, 1),
+ .setscl = LINEOP_CONTROL(PARPORT_CONTROL_SELECT, 1),
+ .getsda = LINEOP_STATUS(PARPORT_STATUS_SELECT, 0)
},
/* type 3: ELV adapter */
{
- .setsda = { 0x02, DATA, 1 },
- .setscl = { 0x01, DATA, 1 },
- .getsda = { 0x40, STAT, 1 },
- .getscl = { 0x08, STAT, 1 },
+ .setsda = LINEOP_DATA(0x02, 1),
+ .setscl = LINEOP_DATA(0x01, 1),
+ .getsda = LINEOP_STATUS(PARPORT_STATUS_ACK, 1),
+ .getscl = LINEOP_STATUS(PARPORT_STATUS_ERROR, 1)
},
/* type 4: ADM1032 evaluation board */
{
- .setsda = { 0x02, DATA, 1 },
- .setscl = { 0x01, DATA, 1 },
- .getsda = { 0x10, STAT, 1 },
- .init = { 0xf0, DATA, 0 },
+ .setsda = LINEOP_DATA(0x02, 1),
+ .setscl = LINEOP_DATA(0x01, 1),
+ .getsda = LINEOP_STATUS(PARPORT_STATUS_SELECT, 1),
+ .init = LINEOP_DATA(0xf0,0)
},
/* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */
{
- .setsda = { 0x02, DATA, 1 },
- .setscl = { 0x01, DATA, 1 },
- .getsda = { 0x10, STAT, 1 },
+ .setsda = LINEOP_DATA(0x02, 1),
+ .setscl = LINEOP_DATA(0x01, 1),
+ .getsda = LINEOP_STATUS(PARPORT_STATUS_SELECT, 1)
},
/* type 6: Barco LPT->DVI (K5800236) adapter */
{
- .setsda = { 0x02, DATA, 1 },
- .setscl = { 0x01, DATA, 1 },
- .getsda = { 0x20, STAT, 0 },
- .getscl = { 0x40, STAT, 0 },
- .init = { 0xfc, DATA, 0 },
+ .setsda = LINEOP_DATA(0x02, 1),
+ .setscl = LINEOP_DATA(0x01, 1),
+ .getsda = LINEOP_STATUS(PARPORT_STATUS_PAPEROUT, 0),
+ .getscl = LINEOP_STATUS(PARPORT_STATUS_ACK, 0),
+ .init = LINEOP_DATA(0xfc, 0)
},
};
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
