[RFC PATCH 21/35] subarch TLB support

[Chris Wright <chrisw@sous-sol.org>]

Paravirtualize TLB flushes by using the flush interfaces provided by
the hypervisor. These hide the details of cross-CPU shootdowns and
allow significant optimisations (for example, by avoiding shooting
down on virtual CPUs that are descheduled). This is considerably
faster in most cases than performing virtual IPIs in the guest kernel.

Signed-off-by: Ian Pratt <ian.pratt@xensource.com>
Signed-off-by: Christian Limpach <Christian.Limpach@cl.cam.ac.uk>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
---
 include/asm-i386/mach-default/mach_tlbflush.h |   59 ++++++++++++++++++++++++++
 include/asm-i386/mach-xen/mach_tlbflush.h     |   25 +++++++++++
 include/asm-i386/tlbflush.h                   |   55 ------------------------
 3 files changed, 85 insertions(+), 54 deletions(-)

--- xen-subarch-2.6.orig/include/asm-i386/tlbflush.h
+++ xen-subarch-2.6/include/asm-i386/tlbflush.h
@@ -5,64 +5,11 @@
 #include <linux/mm.h>
 #include <asm/processor.h>
 
-#define __flush_tlb()							\
-	do {								\
-		unsigned int tmpreg;					\
-									\
-		__asm__ __volatile__(					\
-			"movl %%cr3, %0;              \n"		\
-			"movl %0, %%cr3;  # flush TLB \n"		\
-			: "=r" (tmpreg)					\
-			:: "memory");					\
-	} while (0)
-
-/*
- * Global pages have to be flushed a bit differently. Not a real
- * performance problem because this does not happen often.
- */
-#define __flush_tlb_global()						\
-	do {								\
-		unsigned int tmpreg, cr4, cr4_orig;			\
-									\
-		__asm__ __volatile__(					\
-			"movl %%cr4, %2;  # turn off PGE     \n"	\
-			"movl %2, %1;                        \n"	\
-			"andl %3, %1;                        \n"	\
-			"movl %1, %%cr4;                     \n"	\
-			"movl %%cr3, %0;                     \n"	\
-			"movl %0, %%cr3;  # flush TLB        \n"	\
-			"movl %2, %%cr4;  # turn PGE back on \n"	\
-			: "=&r" (tmpreg), "=&r" (cr4), "=&r" (cr4_orig)	\
-			: "i" (~X86_CR4_PGE)				\
-			: "memory");					\
-	} while (0)
-
 extern unsigned long pgkern_mask;
 
-# define __flush_tlb_all()						\
-	do {								\
-		if (cpu_has_pge)					\
-			__flush_tlb_global();				\
-		else							\
-			__flush_tlb();					\
-	} while (0)
-
 #define cpu_has_invlpg	(boot_cpu_data.x86 > 3)
 
-#define __flush_tlb_single(addr) \
-	__asm__ __volatile__("invlpg %0": :"m" (*(char *) addr))
-
-#ifdef CONFIG_X86_INVLPG
-# define __flush_tlb_one(addr) __flush_tlb_single(addr)
-#else
-# define __flush_tlb_one(addr)						\
-	do {								\
-		if (cpu_has_invlpg)					\
-			__flush_tlb_single(addr);			\
-		else							\
-			__flush_tlb();					\
-	} while (0)
-#endif
+#include <mach_tlbflush.h>
 
 /*
  * TLB flushing:
--- /dev/null
+++ xen-subarch-2.6/include/asm-i386/mach-default/mach_tlbflush.h
@@ -0,0 +1,59 @@
+#ifndef __ASM_MACH_TLBFLUSH_H
+#define __ASM_MACH_TLBFLUSH_H
+
+#define __flush_tlb()							\
+	do {								\
+		unsigned int tmpreg;					\
+									\
+		__asm__ __volatile__(					\
+			"movl %%cr3, %0;              \n"		\
+			"movl %0, %%cr3;  # flush TLB \n"		\
+			: "=r" (tmpreg)					\
+			:: "memory");					\
+	} while (0)
+
+/*
+ * Global pages have to be flushed a bit differently. Not a real
+ * performance problem because this does not happen often.
+ */
+#define __flush_tlb_global()						\
+	do {								\
+		unsigned int tmpreg, cr4, cr4_orig;			\
+									\
+		__asm__ __volatile__(					\
+			"movl %%cr4, %2;  # turn off PGE     \n"	\
+			"movl %2, %1;                        \n"	\
+			"andl %3, %1;                        \n"	\
+			"movl %1, %%cr4;                     \n"	\
+			"movl %%cr3, %0;                     \n"	\
+			"movl %0, %%cr3;  # flush TLB        \n"	\
+			"movl %2, %%cr4;  # turn PGE back on \n"	\
+			: "=&r" (tmpreg), "=&r" (cr4), "=&r" (cr4_orig)	\
+			: "i" (~X86_CR4_PGE)				\
+			: "memory");					\
+	} while (0)
+
+#define __flush_tlb_all()						\
+	do {								\
+		if (cpu_has_pge)					\
+			__flush_tlb_global();				\
+		else							\
+			__flush_tlb();					\
+	} while (0)
+
+#define __flush_tlb_single(addr) \
+	__asm__ __volatile__("invlpg %0": :"m" (*(char *) addr))
+
+#ifdef CONFIG_X86_INVLPG
+# define __flush_tlb_one(addr) __flush_tlb_single(addr)
+#else
+# define __flush_tlb_one(addr)						\
+	do {								\
+		if (cpu_has_invlpg)					\
+			__flush_tlb_single(addr);			\
+		else							\
+			__flush_tlb();					\
+	} while (0)
+#endif
+
+#endif /* __ASM_MACH_TLBFLUSH_H */
--- /dev/null
+++ xen-subarch-2.6/include/asm-i386/mach-xen/mach_tlbflush.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_MACH_TLBFLUSH_H
+#define __ASM_MACH_TLBFLUSH_H
+
+static inline void xen_tlb_flush(void)
+{
+        struct mmuext_op op;
+        op.cmd = MMUEXT_TLB_FLUSH_LOCAL;
+        BUG_ON(HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF) < 0);
+}
+
+static inline void xen_invlpg(unsigned long ptr)
+{
+        struct mmuext_op op;
+        op.cmd = MMUEXT_INVLPG_LOCAL;
+        op.arg1.linear_addr = ptr & PAGE_MASK;
+        BUG_ON(HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF) < 0);
+}
+
+#define __flush_tlb() xen_tlb_flush()
+#define __flush_tlb_global() xen_tlb_flush()
+#define __flush_tlb_all() xen_tlb_flush()
+#define __flush_tlb_single(addr) xen_invlpg(addr)
+#define __flush_tlb_one(addr) __flush_tlb_single(addr)
+
+#endif /* __ASM_MACH_TLBFLUSH_H */

--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/