Ed Sweetman wrote:
I'm using 2.6.16-rc6-ide1 (alan's patchset) and using the sata_nv and
pata_amd drivers. I have all UDMA drives except a CF disk -> IDE
interface, which should be running in PIO mode4. Libata detects the
device, but spits out a message about "no dma" and then says it's not
supported and is ignoring it. Is this device not supported because
it's not using dma or for some other reason?
It's the only device on it's channel (secondary pata)
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
ata6: dev 0 cfg 49:0e00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000
88:0000
ata6: no dma
ata6: dev 0 not supported, ignoring
scsi5 : pata_amd
Delete the "no dma" check, and debug from there... PIO support is in
there, just needs a few final fixes.
Jeff
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
