Re: [Sdhci-devel] [2.6.16-rc6-mm1] sdhci driver purrrfect

[Giuseppe Castagna <Giuseppe.Castagna@ens.fr>]

I confirm,

  I have the same machine and the same mm-kernel, and it works perfectly also with
pny technology sd-cards (128M and 1Gb).

--Beppe--


vido@ldh.org wrote:
> I'm sending this on behalf the SDHCI-devel people. I tested today the
> latest SDHCI driver on my Thinkpad X40 with the 2.6.16-rc6-mm1 kernel.
>
> The SD card reader itself is a Ricoh :
> 0000:02:00.1 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
>
>
> The initialisation part is normal, here is the dmesg portion :
>
> sdhci: Secure Digital Host Controller Interface driver, 0.11
> sdhci: Copyright(c) Pierre Ossman
> PCI: Found IRQ 5 for device 0000:02:00.1
> PCI: Sharing IRQ 5 with 0000:00:1f.3
> PCI: Sharing IRQ 5 with 0000:00:1f.5
> PCI: Sharing IRQ 5 with 0000:00:1f.6
> cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x370-0x377
> cs: IO port probe 0x800-0x8ff: clean.
> cs: IO port probe 0xc00-0xcff: clean.
> cs: IO port probe 0xa00-0xaff: clean.
> mmc0: SDHCI at 0xd0210000 irq 5 PIO
>
>
> I tested with 5 different SD card models (no MMC), correctly identified
> upon insertion as shown below :
> - Hagiwara "Super High Speed" 1 Gb (ac41 SK01G 967680KiB)
> - Kingmax "Platinum" 1 Gb (b368 SD01G 999936KiB)
> - SanDisk 512 Mb (a95c SD512 495488KiB)
> - Generic 128 Mb (cdef SD128 118272KiB)
> - Toshiba 16 Mb (6f52 SD016 14560KiB)
>
> I found no problem to read, write or delete.
>
> My opinion is that this patch is mature enough to become part of
> the regular Linux kernel. 
> Andrew please consider pushing the code to Linus in time for 2.6.16,
> as it's a device with no current driver.
>
> Regards,

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/