Re: 2.6.16-rc6-rt3

[Steven Rostedt <rostedt@goodmis.org>]

On Tue, 2006-03-14 at 07:36 -0600, K.R. Foley wrote:
> Ingo Molnar wrote:
> > i have released the 2.6.16-rc6-rt3 tree, which can be downloaded from 
> > the usual place:
> > 
> 
> This one doesn't want to boot on the old SMP box. Log and config attached.
> 

[...]

> Freeing unused kernel memory: 280k freed
> Could not allocate 8 bytes percpu data
> BUG: Unable to handle kernel paging request at virtual address f3010000
>  printing eip:
> c0131c79
> *pde = 00000000
> Oops: 0000 [#1]
> PREEMPT SMP 
> Modules linked in:
> CPU:    0
> EIP:    0060:[<c0131c79>]    Not tainted VLI
> EFLAGS: 00010297   (2.6.16-rc6-rt3 #19) 
> EIP is at __find_symbol+0x37/0x1da
> eax: ffffffff   ebx: 000004b0   ecx: c02fe964   edx: c02fab00
> esi: f3010000   edi: e08255d0   ebp: de78fe9c   esp: de78fe8c
> ds: 007b   es: 007b   ss: 0068   preempt: 00000001
> Process insmod (pid: 804, threadinfo=de78e000 task=de4f9840 stack_left=7768 worst_left=-1)
> Stack: <0>000004b0 e082adc0 e082bc80 e08255d0 de78fec8 c0132cc6 e08255d0 de78feb4 
>        de78feb8 00000001 00000000 e082adc0 e082adc0 00000370 00000032 de78fef0 
>        c013321c e0824930 0000000b e08255d0 e082bc80 00000000 e0824930 e082bc8d 
> Call Trace:
>  [<c01038fb>] show_stack_log_lvl+0xa5/0xad (44)
>  [<c0103a67>] show_registers+0x137/0x1a0 (44)
>  [<c0103c3b>] die+0xf3/0x16f (56)
>  [<c0111e19>] do_page_fault+0x36f/0x48a (88)
>  [<c010357f>] error_code+0x4f/0x54 (76)
>  [<c0132cc6>] resolve_symbol+0x22/0x5d (44)
>  [<c013321c>] simplify_symbols+0x81/0xf4 (40)
>  [<c0133e2d>] load_module+0x637/0x968 (168)
>  [<c01341c1>] sys_init_module+0x3d/0x1d3 (28)
>  [<c0102a1b>] sysenter_past_esp+0x54/0x75 (-8116)
> ---------------------------
> | preempt count: 00000001 ]

Hmm, you didn't do a make modules_install, then change some of the
config options, do a make install and forget to do a modules_install did
you?  That error looks like the error I get when I do something like
that.

If you have done more than one make and install, could you do a make
clean and start again?  Just to make sure it's not a incompatibility
between makes.

Thanks,

-- Steve


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/