Hello,
When I try to burn CD's/DVD's my computer crashes.
It seems to be independently from the recording software and from the
drive. It occurs with cdrecord (cdrecord-clone version 2.01.01a01 from
debian) and growisofs (version 5.21 from debian), and with the drives
NEC ND-4550A and LG GMA-4020B.
The problem occurs at least with the kernels 2.6.14.7, 2.6.15.4 and
2.6.16-rc6 (The earlier verions I tested are very unstable. Mostly
it was not possible even to boot.)
Unfortunately I cant obtain any error messages, even with several debug
options turned on. Here is a screenshot :-) of crashed cdrecord, but
there is nothing unnormal to see:
http://www.simg.de/tmp10/cd-2.6.16-rc6.png
That is my .config:
http://www.simg.de/tmp10/2.6.16-rc6-config
My hardware is:
Mainboard: Tyan S2466 (AMD 760MPX Dual Athlon board, latest BIOS)
CPU's: 2 x Barton MP 2133 MHz
Memory: 2GB registred ECC
Drives: see below
PCI: see bolow
More Info is attached below. Please mail me, if you need more.
Best regards,
Stefan
----------------------------------------------------------------------------------
/proc/scsi:
Attached devices:
Host: scsi0 Channel: 01 Id: 00 Lun: 00
Vendor: MAXTOR Model: ATLAS15K2_73SCA Rev: JNZM
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 01 Id: 01 Lun: 00
Vendor: FUJITSU Model: MAN3367MP Rev: 0109
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: _NEC Model: DVD_RW ND-4550A Rev: 1.07
Type: CD-ROM ANSI SCSI revision: ffffffff
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: HL-DT-ST Model: DVDRAM GMA-4020B Rev: A109
Type: CD-ROM ANSI SCSI revision: ffffffff
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: Generic Model: STORAGE DEVICE Rev: 9317
Type: Direct-Access ANSI SCSI revision: 02
----------------------------------------------------------------------------------
ide/scsi boot messages:
Mar 13 20:33:39 ws2 kernel: ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
Mar 13 20:33:39 ws2 kernel: AMD7441: IDE controller at PCI slot 0000:00:07.1
Mar 13 20:33:39 ws2 kernel: AMD7441: chipset revision 4
Mar 13 20:33:39 ws2 kernel: AMD7441: not 100%% native mode: will probe
irqs later
Mar 13 20:33:39 ws2 kernel: AMD7441: 0000:00:07.1 (rev 04) UDMA100
controller
Mar 13 20:33:39 ws2 kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS
settings: hda:DMA, hdb:DMA
Mar 13 20:33:39 ws2 kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS
settings: hdc:DMA, hdd:DMA
Mar 13 20:33:39 ws2 kernel: hda: HDT722525DLAT80, ATA DISK drive
Mar 13 20:33:39 ws2 kernel: hdb: Pioneer DVD-ROM ATAPIModel DVD-106S
012, ATAPI CD/DVD-ROM drive
Mar 13 20:33:39 ws2 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 13 20:33:39 ws2 kernel: hdc: _NEC DVD_RW ND-4550A, ATAPI CD/DVD-ROM
drive
Mar 13 20:33:39 ws2 kernel: hdd: HL-DT-ST DVDRAM GMA-4020B, ATAPI
CD/DVD-ROM drive
Mar 13 20:33:39 ws2 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 13 20:33:39 ws2 kernel: hda: max request size: 1024KiB
Mar 13 20:33:39 ws2 kernel: hda: 488397168 sectors (250059 MB) w/7674KiB
Cache, CHS=30401/255/63, UDMA(100)
Mar 13 20:33:39 ws2 kernel: hda: cache flushes supported
Mar 13 20:33:39 ws2 kernel: hda: hda1 hda2 hda3
Mar 13 20:33:39 ws2 kernel: hdb: ATAPI 40X DVD-ROM drive, 256kB Cache,
UDMA(66)
Mar 13 20:33:39 ws2 kernel: Uniform CD-ROM driver Revision: 3.20
Mar 13 20:33:39 ws2 kernel: ide-cd: passing drive hdc to ide-scsi emulation.
Mar 13 20:33:39 ws2 kernel: ide-cd: passing drive hdd to ide-scsi emulation.
Mar 13 20:33:39 ws2 kernel: qla1280: QLA12160 found on PCI bus 0, dev 9
Mar 13 20:33:39 ws2 kernel: scsi(0): Reading NVRAM
Mar 13 20:33:39 ws2 kernel: scsi(0:0): Resetting SCSI BUS
Mar 13 20:33:39 ws2 kernel: scsi(0:1): Resetting SCSI BUS
Mar 13 20:33:39 ws2 kernel: scsi0 : QLogic QLA12160 PCI to SCSI Host Adapter
Mar 13 20:33:39 ws2 kernel: Firmware version: 10.04.42, Driver
version 3.25
Mar 13 20:33:39 ws2 kernel: Vendor: MAXTOR Model: ATLAS15K2_73SCA
Rev: JNZM
Mar 13 20:33:39 ws2 kernel: Type: Direct-Access
ANSI SCSI revision: 03
Mar 13 20:33:39 ws2 kernel: scsi(0:1:0:0): Sync: period 9, offset 24,
Wide, DT
Mar 13 20:33:39 ws2 kernel: Vendor: FUJITSU Model: MAN3367MP
Rev: 0109
Mar 13 20:33:39 ws2 kernel: Type: Direct-Access
ANSI SCSI revision: 03
Mar 13 20:33:39 ws2 kernel: scsi(0:1:1:0): Sync: period 9, offset 24,
Wide, DT
Mar 13 20:33:39 ws2 kernel: ide-scsi is deprecated for cd burning! Use
ide-cd and give dev=/dev/hdX as device
Mar 13 20:33:39 ws2 kernel: scsi1 : SCSI host adapter emulation for IDE
ATAPI devices
Mar 13 20:33:39 ws2 kernel: Vendor: _NEC Model: DVD_RW ND-4550A
Rev: 1.07
Mar 13 20:33:39 ws2 kernel: Type: CD-ROM
ANSI SCSI revision: 00
Mar 13 20:33:39 ws2 kernel: scsi2 : SCSI host adapter emulation for IDE
ATAPI devices
Mar 13 20:33:39 ws2 kernel: Vendor: HL-DT-ST Model: DVDRAM GMA-4020B
Rev: A109
Mar 13 20:33:39 ws2 kernel: Type: CD-ROM
ANSI SCSI revision: 00
Mar 13 20:33:39 ws2 kernel: SCSI device sda: 143374650 512-byte hdwr
sectors (73408 MB)
Mar 13 20:33:39 ws2 kernel: SCSI device sda: drive cache: write through
Mar 13 20:33:39 ws2 kernel: SCSI device sda: 143374650 512-byte hdwr
sectors (73408 MB)
Mar 13 20:33:39 ws2 kernel: SCSI device sda: drive cache: write through
Mar 13 20:33:39 ws2 kernel: sda: sda1 sda2 sda3 sda4
Mar 13 20:33:39 ws2 kernel: Attached scsi disk sda at scsi0, channel 1,
id 0, lun 0
Mar 13 20:33:39 ws2 kernel: SCSI device sdb: 71771688 512-byte hdwr
sectors (36747 MB)
Mar 13 20:33:39 ws2 kernel: SCSI device sdb: drive cache: write back
Mar 13 20:33:39 ws2 kernel: SCSI device sdb: 71771688 512-byte hdwr
sectors (36747 MB)
Mar 13 20:33:39 ws2 kernel: SCSI device sdb: drive cache: write back
Mar 13 20:33:39 ws2 kernel: sdb: sdb1 sdb2
Mar 13 20:33:39 ws2 kernel: Attached scsi disk sdb at scsi0, channel 1,
id 1, lun 0
Mar 13 20:33:39 ws2 kernel: sr0: scsi3-mmc drive: 0x/0x caddy
Mar 13 20:33:39 ws2 kernel: sr1: scsi3-mmc drive: 0x/0x caddy
Mar 13 20:33:39 ws2 kernel: Attached scsi generic sg0 at scsi0, channel
1, id 0, lun 0, type 0
Mar 13 20:33:39 ws2 kernel: Attached scsi generic sg1 at scsi0, channel
1, id 1, lun 0, type 0
Mar 13 20:33:39 ws2 kernel: Attached scsi generic sg2 at scsi1, channel
0, id 0, lun 0, type 5
Mar 13 20:33:39 ws2 kernel: Attached scsi generic sg3 at scsi2, channel
0, id 0, lun 0, type 5
----------------------------------------------------------------------------------
/proc/interrupts:
CPU0 CPU1
0: 503595 744635 IO-APIC-edge timer
1: 5040 7016 IO-APIC-edge i8042
2: 0 0 XT-PIC cascade
8: 2 2 IO-APIC-edge rtc
12: 159728 195845 IO-APIC-edge i8042
14: 28317 29306 IO-APIC-edge ide0
15: 0 13 IO-APIC-edge ide1
16: 15882 15870 IO-APIC-level bttv0, ehci_hcd:usb1
17: 44864 44277 IO-APIC-level qla1280, ohci1394
18: 8 8 IO-APIC-level ohci_hcd:usb2, Ensoniq AudioPCI
19: 19338 19233 IO-APIC-level saa7146 (0), ohci_hcd:usb3,
eth0
NMI: 64670 98880
LOC: 1248159 1248158
ERR: 0
MIS:
----------------------------------------------------------------------------------
/proc/iomem:
00000000-0009e3ff : System RAM
0009e400-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ccfff : Video ROM
000cd000-000cd7ff : Adapter ROM
000cd800-000cffff : Adapter ROM
000f0000-000fffff : System ROM
00100000-7fffffff : System RAM
00100000-0042edeb : Kernel code
0042edec-0055e44b : Kernel data
88000000-8801ffff : 0000:00:09.0
c0000000-c0000fff : 0000:00:09.0
c0100000-c01fffff : PCI Bus #01
c0100000-c010ffff : 0000:01:05.0
c0110000-c011ffff : 0000:01:05.1
c0120000-c013ffff : 0000:01:05.0
c0200000-c03fffff : PCI Bus #02
c0201000-c02011ff : 0000:02:07.0
c0201000-c02011ff : saa7146
c0201400-c020147f : 0000:02:08.0
c0300000-c03fffff : PCI Bus #03
c0300000-c0300fff : 0000:03:09.0
c0300000-c0300fff : ohci_hcd
c0301000-c0301fff : 0000:03:09.1
c0301000-c0301fff : ohci_hcd
c0302000-c03027ff : 0000:03:08.0
c0302000-c03027ff : ohci1394
c0302800-c03028ff : 0000:03:09.2
c0302800-c03028ff : ehci_hcd
c0600000-c0600fff : 0000:00:00.0
c4000000-c7ffffff : 0000:00:00.0
d0000000-efffffff : PCI Bus #01
d0000000-dfffffff : 0000:01:05.0
d0000000-dfffffff : vesafb
e0000000-efffffff : 0000:01:05.1
f0000000-f00fffff : PCI Bus #02
f0000000-f0000fff : 0000:02:04.0
f0000000-f0000fff : bttv0
f0001000-f0001fff : 0000:02:04.1
f0020000-f003ffff : 0000:02:08.0
fec00000-fec07fff : reserved
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
----------------------------------------------------------------------------------
/proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial
0c00-0c07 : w83627hf
0cf8-0cff : PCI conf1
1000-10ff : 0000:00:09.0
1410-1413 : 0000:00:00.0
2000-2fff : PCI Bus #01
2000-20ff : 0000:01:05.0
3000-4fff : PCI Bus #02
3000-307f : 0000:02:08.0
3000-307f : 0000:02:08.0
3080-30bf : 0000:02:06.0
3080-30bf : Ensoniq AudioPCI
4000-4fff : PCI Bus #03
4000-407f : 0000:03:08.0
80e0-80ef : amd756-smbus
f000-f00f : 0000:00:07.1
f000-f007 : ide0
f008-f00f : ide1
----------------------------------------------------------------------------------
/proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 10
model name : AMD Athlon(tm) MP 2800+
stepping : 0
cpu MHz : 2133.684
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 4276.53
processor : 1
vendor_id : AuthenticAMD
cpu family : 6
model : 10
model name : AMD Athlon(tm) Processor
stepping : 0
cpu MHz : 2133.684
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 4267.23
----------------------------------------------------------------------------------
lspci -vvv
0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP
[IGD4-2P] System Controller (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at c4000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at c0600000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at 1410 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit-
FW- Rate=x4
0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP
[IGD4-2P] AGP Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: d0000000-efffffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA
(rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus]
IDE (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at f000 [size=16]
0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI
(rev 03)
Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:09.0 SCSI storage controller: QLogic Corp. ISP12160 Dual Channel
Ultra3 SCSI Processor (rev 06)
Subsystem: QLogic Corp.: Unknown device 0007
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 88000000 [disabled] [size=128K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI
(rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=03, sec-latency=69
I/O behind bridge: 00003000-00004fff
Memory behind bridge: c0200000-c03fffff
Prefetchable memory behind bridge: f0000000-f00fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:01:05.0 VGA compatible controller: ATI Technologies Inc RV350 AP
[Radeon 9600] (prog-if 00 [VGA])
Subsystem: C.P. Technology Co. Ltd PowerColor R96A-C3N
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit-
FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:05.1 Display controller: ATI Technologies Inc RV350 AP [Radeon
9600] (Secondary)
Subsystem: C.P. Technology Co. Ltd: Unknown device 2065
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at c0110000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:04.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV Series
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=4K]
0000:02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV Series
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0001000 (32-bit, prefetchable) [size=4K]
0000:02:05.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge
(non-transparent mode) (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x10 (64 bytes)
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c0300000-c03fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [90] #06 [0080]
0000:02:06.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 3080 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:07.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: TERRATEC Electronic GmbH: Unknown device 1156
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0201000 (32-bit, non-prefetchable) [size=512]
0000:02:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M
[Tornado] (rev 78)
Subsystem: Tyan Computer Tiger MPX S2466 (3C920 Integrated Fast
Ethernet Controller)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 80 (2500ns min, 2500ns max), Cache Line Size: 0x10 (64
bytes)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 3000 [size=128]
Region 1: Memory at c0201400 (32-bit, non-prefetchable) [size=128]
Expansion ROM at f0020000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0000:03:08.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 46) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c0302000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at 4000 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:03:09.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10
[OHCI])
Subsystem: Unknown device 2098:2100
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 0x10 (64
bytes)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0300000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:03:09.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10
[OHCI])
Subsystem: Unknown device 2098:2100
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 0x10 (64
bytes)
Interrupt: pin B routed to IRQ 19
Region 0: Memory at c0301000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:03:09.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if
20 [EHCI])
Subsystem: Unknown device 2098:2000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 132 (4000ns min, 8500ns max), Cache Line Size: 0x10
(64 bytes)
Interrupt: pin C routed to IRQ 16
Region 0: Memory at c0302800 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
----------------------------------------------------------------------------------
ver_linux output (Debian 3.1 system)
Gnu C 3.3.5
Gnu make 3.80
binutils 2.15
util-linux 2.12p
mount 2.12p
module-init-tools 3.2-pre1
e2fsprogs 1.37
reiserfsprogs line
reiser4progs line
PPP 2.4.3
nfs-utils 1.0.6
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.2.1
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.2.1
Modules Loaded
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
