RE: Router stops routing after changing MAC Address

["Greg Scott" <GregScott@InfraSupportEtc.com>]

No - tried that earlier, no effect.  I also deleted and recreated all
the routes.  Again, no effect.  

- Greg
 

-----Original Message-----
From: Alan Cox [mailto:alan@lxorguk.ukuu.org.uk] 
Sent: Sunday, March 12, 2006 2:55 PM
To: Greg Scott
Cc: linux-kernel@vger.kernel.org; Bart Samwel
Subject: RE: Router stops routing after changing MAC Address

On Sul, 2006-03-12 at 13:38 -0600, Greg Scott wrote:
> I think the NICs on all the systems are 3c905b's.  The system with the
> 2.4 kernel on it has them and I think that is what I put in my 2.6-11 
> test system as well.  My 2.6 system doesn't have a modules.conf file 
> so I will need to dig a little deeper.  I suppose I could just open it

> up and look.  But I am almost sure I put 3c905b cards in both test
systems.

Humm - do they start routing correctly if you "ifconfig eth0 promisc"
(where eth0 is each interface whose mac you changed) ?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/