Re: IDE CDROM - No DMA

[Parag Warudkar <kernel-stuff@comcast.net>]

On Sunday 12 March 2006 14:29, Parag Warudkar wrote:
> Funny situation - I cannot figure what my root device is. Earlier without
> the patch it was /dev/sda3 and now I try everything (hda3, hdb3, hdc3,
> hdd3, sda3, sdb3...) but it panics - not able to mount rootfs.
Never mind - I am dumb enough to not realize I needed SCSI Disk in built or as 
modules copied over to proper place :)

It boots but I don't think DMA is in effect on the CDROM drive though - (I get  
3Mb/s transfer speeds from it.  LS of a 1500 file directory is too slow).  
dmesg says ata2  configured for UDMA/33 but doesn't seem like it has 
actually.

Memory: 2065588k/2087756k available (2495k kernel code, 21676k reserved, 722k 
data, 216k init, 0k highmem)
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05-ac7
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
ata1: dev 0 cfg 49:2f00 82:746b 83:7f09 84:6023 85:7469 86:3e09 87:6023 
88:203f
ata1: dev 0 ATA-6, max UDMA/100, 153356490 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
ata2: dev 0 cfg 49:0f00 82:0210 83:4011 84:4000 85:0000 86:0001 87:4000 
88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2(0): applying bridge limits
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
EXT3-fs: mounted filesystem with ordered data mode.

Hard disk is fine - gives around 31 Mb/S. 

Parag
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/