Re: Problem with a CD

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[email protected] wrote:
I have error messages in my logs:
on computer #1, they look like:
|hdc: command error: status=0x51 { DriveReady SeekComplete Error }
|hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
|ide: failed opcode was: unknown
|end_request: I/O error, dev hdc, sector 5008
|Buffer I/O error on device hdc, logical block 1252
on computer #2, they are simpler:
|end_request: I/O error, dev sr0, sector 5008
|Buffer I/O error on device sr0, logical block 1252

On both computers, I have the errors on the same sectors/blocks.

For the two offending files, the errors already occur on the beginings of
the files.

Of course, all of this point to a defective CD, except that on both
computers, I can read the files without any problem with windows XP
(well, actually, I have only read avseq01.dat, which is a video file. I
haven't tried the other troublesome file.)

What could be the problem ?

This is a VCD, right? Those use Mode 2 Form 2 which has weak error correction (like an audio CD). It's possible the drive is returning read errors and WinXP is ignoring the errors because it's a VCD, and Linux is not..

--
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux