David,
It is better to address such questions to v4l ml or to dvb ml. Is it
possible to make it work with your help.
Cheers,
Mauro.
Em Sáb, 2006-03-04 às 09:31 +0100, David Kredba escreveu:
> Hello.
>
> I got PCI card Genius VideoWonder DVB-T and I am trying to get it to work.
>
> The card is using SAA7134H, TDA 10046HT and TDA 8274 chips.
>
> My system is Gentoo (Base System version 1.6.14), kernel 2.6.15.
>
> The card is, by lspci, visible as :
>
> 02:03.0 Multimedia controller: Philips Semiconductors SAA7134 Video
> Broadcast Decoder (rev 01)
> Subsystem: KYE Systems Corporation Unknown device 0301
> Flags: bus master, medium devsel, latency 32, IRQ 19
> Memory at ffdffc00 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [40] Power Management version 1
>
> If I tried to load saa7134-dvb module it loads and loads all of the
> other needed modules, but it ignores the card and the module saa7134
> reports the card as V4L2 device and not the DVB.
>
> There is /usr/lib/hotplug/firmware dvb-fe-tda10046.fw firmware.
>
> The state before saa7134-dvb loaded :
>
> Module Size Used by
> w83627hf 24080 0
> hwmon_vid 2432 1 w83627hf
> i2c_isa 3840 1 w83627hf
> snd_seq_midi 7072 0
> snd_emu10k1_synth 7040 0
> snd_emux_synth 35456 1 snd_emu10k1_synth
> snd_seq_virmidi 6272 1 snd_emux_synth
> snd_seq_midi_emul 7040 1 snd_emux_synth
> snd_pcm_oss 48800 0
> snd_mixer_oss 17280 1 snd_pcm_oss
> snd_seq_oss 33152 0
> snd_seq_midi_event 6144 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss
> snd_seq 50448 8
> snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event
> hci_usb 14100 5
> emu10k1_gp 3072 0
> snd_emu10k1 116388 2 snd_emu10k1_synth
> snd_rawmidi 20896 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
> snd_seq_device 7308 7
> snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi
> snd_ac97_codec 91040 1 snd_emu10k1
> snd_pcm 80772 3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec
> snd_timer 21636 3 snd_seq,snd_emu10k1,snd_pcm
> snd_ac97_bus 2176 1 snd_ac97_codec
> snd_page_alloc 8584 2 snd_emu10k1,snd_pcm
> snd_util_mem 3584 2 snd_emux_synth,snd_emu10k1
> snd_hwdep 7456 2 snd_emux_synth,snd_emu10k1
> snd 48356 15
> snd_emux_synth,snd_seq_virmidi,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep
> soundcore 8032 1 snd
> video_buf 17284 0
> ir_kbd_i2c 6924 0
> ir_common 8324 1 ir_kbd_i2c
> videodev 7680 0
> i2c_i801 8076 0
> i2c_core 17536 4 w83627hf,i2c_isa,ir_kbd_i2c,i2c_i801
> intel_agp 20380 1
> agpgart 28880 1 intel_agp
> r8169 23816 0
>
>
> The state after the saa7134-dvb loaded :
>
> saa7134_dvb 10500 0
> mt352 6276 1 saa7134_dvb
> saa7134 108896 1 saa7134_dvb
> v4l2_common 4992 1 saa7134
> v4l1_compat 13700 1 saa7134
> video_buf_dvb 4868 1 saa7134_dvb
> dvb_core 76584 1 video_buf_dvb
> nxt200x 14724 1 saa7134_dvb
> dvb_pll 9092 2 saa7134_dvb,nxt200x
> tda1004x 15108 1 saa7134_dvb
> firmware_class 8320 3 saa7134_dvb,nxt200x,tda1004x
> w83627hf 24080 0
> hwmon_vid 2432 1 w83627hf
> i2c_isa 3840 1 w83627hf
> snd_seq_midi 7072 0
> snd_emu10k1_synth 7040 0
> snd_emux_synth 35456 1 snd_emu10k1_synth
> snd_seq_virmidi 6272 1 snd_emux_synth
> snd_seq_midi_emul 7040 1 snd_emux_synth
> snd_pcm_oss 48800 0
> snd_mixer_oss 17280 1 snd_pcm_oss
> snd_seq_oss 33152 0
> snd_seq_midi_event 6144 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss
> snd_seq 50448 8
> snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event
> hci_usb 14100 5
> emu10k1_gp 3072 0
> snd_emu10k1 116388 2 snd_emu10k1_synth
> snd_rawmidi 20896 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
> snd_seq_device 7308 7
> snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi
> snd_ac97_codec 91040 1 snd_emu10k1
> snd_pcm 80772 3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec
> snd_timer 21636 3 snd_seq,snd_emu10k1,snd_pcm
> snd_ac97_bus 2176 1 snd_ac97_codec
> snd_page_alloc 8584 2 snd_emu10k1,snd_pcm
> snd_util_mem 3584 2 snd_emux_synth,snd_emu10k1
> snd_hwdep 7456 2 snd_emux_synth,snd_emu10k1
> snd 48356 15
> snd_emux_synth,snd_seq_virmidi,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep
> soundcore 8032 1 snd
> video_buf 17284 3 saa7134_dvb,saa7134,video_buf_dvb
> ir_kbd_i2c 6924 1 saa7134
> ir_common 8324 2 saa7134,ir_kbd_i2c
> videodev 7680 1 saa7134
> i2c_i801 8076 0
> i2c_core 17536 9
> saa7134_dvb,mt352,saa7134,nxt200x,tda1004x,w83627hf,i2c_isa,ir_kbd_i2c,i2c_i801
> intel_agp 20380 1
> agpgart 28880 1 intel_agp
> r8169 23816 0
>
> There is this and only this message, coming from saa7134, in teh
> /var/log/messages file :
>
> saa7130/34: v4l2 driver version 0.2.14 loaded
> ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
> saa7134[0]: found at 0000:02:03.0, rev: 1, irq: 19, latency: 32, mmio:
> 0xffdffc00
> saa7134[0]: subsystem: 1489:0301, board: UNKNOWN/GENERIC
> [card=0,autodetected]
> saa7134[0]: board init: gpio is 10000
> saa7134[0]: i2c eeprom 00: 89 14 01 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 01 03 08 ff 01 ec ff ff ff ff
> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 40: ff 1b 00 c0 ff 10 ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: registered device video0 [v4l2]
> saa7134[0]: registered device vbi0
>
> There is no support for that card at linuxtv.org site.
>
> Is there possibility to get the card working?
>
> Thank you very much, David Kredba
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
Cheers,
Mauro.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
