Re: using usblp with ppdev?

[wixor <wixorpeek@gmail.com>]

>
> What is the output of /proc/bus/usb/devices with your device plugged in?
>
T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12 MaxCh=0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P: Vendor=067b ProdID=2305 Rev= 2.02
S: Manufacturer=Proliftic Technology Inc.
D: Product=IEEE-1284 Controller
C:* #Ifs=1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=07(print) Sub=01 Prot=01 Driver=usblp
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I: If#=0 Alt=1 #EPs=2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E:  Ad=01(O) Atr=02(Bulk) MaxPS=64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MaxPS=64 Ivl=0ms
I: If#=0 Alt=2 #EPs=3 Cls=ff(vend.) Sub=00 Prot=ff Driver=usblp
E:  Ad=01(O) Atr=02(Bulk) MaxPS=64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MaxPS=64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MaxPS=4 Ivl=1ms
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/