Perform the following name substitutions on all source files:
sed 's/BS_MOD_STR/EDAC_MOD_STR/g'
sed 's/bs_thread_info/edac_thread_info/g'
sed 's/bs_thread/edac_thread/g'
sed 's/bs_xstr/edac_xstr/g'
sed 's/bs_str/edac_str/g'
The names that start with BS_ or bs_ are artifacts of when the code
was called "bluesmoke".
Signed-Off-By: David S. Peterson <[email protected]> <[email protected]>
---
Index: linux-2.6.16-rc5-edac/drivers/edac/amd76x_edac.c
===================================================================
--- linux-2.6.16-rc5-edac.orig/drivers/edac/amd76x_edac.c 2006-02-27 16:58:41.000000000 -0800
+++ linux-2.6.16-rc5-edac/drivers/edac/amd76x_edac.c 2006-02-27 16:58:41.000000000 -0800
@@ -233,7 +233,7 @@ static int amd76x_probe1(struct pci_dev
mci->edac_cap = ems_mode ?
(EDAC_FLAG_EC | EDAC_FLAG_SECDED) : EDAC_FLAG_NONE;
- mci->mod_name = BS_MOD_STR;
+ mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.4.2.5 $";
mci->ctl_name = amd76x_devs[dev_idx].ctl_name;
mci->edac_check = amd76x_check;
@@ -339,7 +339,7 @@ MODULE_DEVICE_TABLE(pci, amd76x_pci_tbl)
static struct pci_driver amd76x_driver = {
- .name = BS_MOD_STR,
+ .name = EDAC_MOD_STR,
.probe = amd76x_init_one,
.remove = __devexit_p(amd76x_remove_one),
.id_table = amd76x_pci_tbl,
Index: linux-2.6.16-rc5-edac/drivers/edac/e752x_edac.c
===================================================================
--- linux-2.6.16-rc5-edac.orig/drivers/edac/e752x_edac.c 2006-02-27 16:58:41.000000000 -0800
+++ linux-2.6.16-rc5-edac/drivers/edac/e752x_edac.c 2006-02-27 16:58:41.000000000 -0800
@@ -788,7 +788,7 @@ static int e752x_probe1(struct pci_dev *
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED |
EDAC_FLAG_S4ECD4ED;
/* FIXME - what if different memory types are in different csrows? */
- mci->mod_name = BS_MOD_STR;
+ mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.5.2.11 $";
mci->pdev = pdev;
@@ -1043,7 +1043,7 @@ MODULE_DEVICE_TABLE(pci, e752x_pci_tbl);
static struct pci_driver e752x_driver = {
- .name = BS_MOD_STR,
+ .name = EDAC_MOD_STR,
.probe = e752x_init_one,
.remove = __devexit_p(e752x_remove_one),
.id_table = e752x_pci_tbl,
Index: linux-2.6.16-rc5-edac/drivers/edac/e7xxx_edac.c
===================================================================
--- linux-2.6.16-rc5-edac.orig/drivers/edac/e7xxx_edac.c 2006-02-27 16:58:41.000000000 -0800
+++ linux-2.6.16-rc5-edac/drivers/edac/e7xxx_edac.c 2006-02-27 16:58:41.000000000 -0800
@@ -383,7 +383,7 @@ static int e7xxx_probe1(struct pci_dev *
mci->edac_ctl_cap =
EDAC_FLAG_NONE | EDAC_FLAG_SECDED | EDAC_FLAG_S4ECD4ED;
/* FIXME - what if different memory types are in different csrows? */
- mci->mod_name = BS_MOD_STR;
+ mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.5.2.9 $";
mci->pdev = pdev;
@@ -536,7 +536,7 @@ MODULE_DEVICE_TABLE(pci, e7xxx_pci_tbl);
static struct pci_driver e7xxx_driver = {
- .name = BS_MOD_STR,
+ .name = EDAC_MOD_STR,
.probe = e7xxx_init_one,
.remove = __devexit_p(e7xxx_remove_one),
.id_table = e7xxx_pci_tbl,
Index: linux-2.6.16-rc5-edac/drivers/edac/edac_mc.h
===================================================================
--- linux-2.6.16-rc5-edac.orig/drivers/edac/edac_mc.h 2006-02-27 16:58:41.000000000 -0800
+++ linux-2.6.16-rc5-edac/drivers/edac/edac_mc.h 2006-02-27 16:58:41.000000000 -0800
@@ -80,9 +80,9 @@ extern int edac_debug_level;
#endif /* !CONFIG_EDAC_DEBUG */
-#define bs_xstr(s) bs_str(s)
-#define bs_str(s) #s
-#define BS_MOD_STR bs_xstr(KBUILD_BASENAME)
+#define edac_xstr(s) edac_str(s)
+#define edac_str(s) #s
+#define EDAC_MOD_STR edac_xstr(KBUILD_BASENAME)
#define BIT(x) (1 << (x))
Index: linux-2.6.16-rc5-edac/drivers/edac/i82860_edac.c
===================================================================
--- linux-2.6.16-rc5-edac.orig/drivers/edac/i82860_edac.c 2006-02-27 16:58:41.000000000 -0800
+++ linux-2.6.16-rc5-edac/drivers/edac/i82860_edac.c 2006-02-27 16:58:41.000000000 -0800
@@ -162,7 +162,7 @@ static int i82860_probe1(struct pci_dev
mci->edac_cap = EDAC_FLAG_SECDED;
/* adjust FLAGS */
- mci->mod_name = BS_MOD_STR;
+ mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.1.2.6 $";
mci->ctl_name = i82860_devs[dev_idx].ctl_name;
mci->edac_check = i82860_check;
@@ -253,7 +253,7 @@ static const struct pci_device_id i82860
MODULE_DEVICE_TABLE(pci, i82860_pci_tbl);
static struct pci_driver i82860_driver = {
- .name = BS_MOD_STR,
+ .name = EDAC_MOD_STR,
.probe = i82860_init_one,
.remove = __devexit_p(i82860_remove_one),
.id_table = i82860_pci_tbl,
Index: linux-2.6.16-rc5-edac/drivers/edac/i82875p_edac.c
===================================================================
--- linux-2.6.16-rc5-edac.orig/drivers/edac/i82875p_edac.c 2006-02-27 16:58:41.000000000 -0800
+++ linux-2.6.16-rc5-edac/drivers/edac/i82875p_edac.c 2006-02-27 16:58:41.000000000 -0800
@@ -357,7 +357,7 @@ static int i82875p_probe1(struct pci_dev
mci->edac_cap = EDAC_FLAG_UNKNOWN;
/* adjust FLAGS */
- mci->mod_name = BS_MOD_STR;
+ mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.5.2.11 $";
mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
mci->edac_check = i82875p_check;
@@ -483,7 +483,7 @@ MODULE_DEVICE_TABLE(pci, i82875p_pci_tbl
static struct pci_driver i82875p_driver = {
- .name = BS_MOD_STR,
+ .name = EDAC_MOD_STR,
.probe = i82875p_init_one,
.remove = __devexit_p(i82875p_remove_one),
.id_table = i82875p_pci_tbl,
Index: linux-2.6.16-rc5-edac/drivers/edac/r82600_edac.c
===================================================================
--- linux-2.6.16-rc5-edac.orig/drivers/edac/r82600_edac.c 2006-02-27 16:58:41.000000000 -0800
+++ linux-2.6.16-rc5-edac/drivers/edac/r82600_edac.c 2006-02-27 16:58:41.000000000 -0800
@@ -265,7 +265,7 @@ static int r82600_probe1(struct pci_dev
} else
mci->edac_cap = EDAC_FLAG_NONE;
- mci->mod_name = BS_MOD_STR;
+ mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.1.2.6 $";
mci->ctl_name = "R82600";
mci->edac_check = r82600_check;
@@ -376,7 +376,7 @@ MODULE_DEVICE_TABLE(pci, r82600_pci_tbl)
static struct pci_driver r82600_driver = {
- .name = BS_MOD_STR,
+ .name = EDAC_MOD_STR,
.probe = r82600_init_one,
.remove = __devexit_p(r82600_remove_one),
.id_table = r82600_pci_tbl,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
