Hi Kristen,
Here is one more comment.
> +void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
> + struct hotplug_params *hpp)
> +{
> + acpi_status status = AE_NOT_FOUND;
> + struct pci_dev *pdev = dev;
> +
> + /*
> + * _HPP settings apply to all child buses, until another _HPP is
> + * encountered. If we don't find an _HPP for the input pci dev,
> + * look for it in the parent device scope since that would apply to
> + * this pci dev. If we don't find any _HPP, use hardcoded defaults
> + */
> + while (pdev && (ACPI_FAILURE(status))) {
> + acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));
> + if (!handle)
> + break;
> + status = acpi_run_hpp(handle, hpp);
> + if (!(pdev->bus->parent))
> + break;
> + /* Check if a parent object supports _HPP */
> + pdev = pdev->bus->parent->self;
> + }
> +}
> +EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);
I think the acpi_get_hp_params_from_firmware() function assumes that
users set default hpp parameters into *hpp before calling this function.
I think it is very hard for new users of the function to notice it, so
I think this assumption should be removed.
Thanks,
Kenji Kaneshige
Kristen Accardi wrote:
> shpchprm_acpi.c and pciehprm_acpi.c are nearly identical.
> In addition, there are functions in both these files that
> are also in acpiphp_glue.c. This patch will remove duplicate
> functions from shpchp, pciehp, and acpiphp and move this
> functionality to pci_hotplug, as it is not hardware specific.
> Get rid of shpchprm* and pciehprm* files since they are no longer needed.
> shpchprm_nonacpi.c and pciehprm_nonacpi.c are identical, as well
> as shpchprm_legacy.c and can be replaced with a macro.
>
> Signed-off-by: Kristen Carlson Accardi <[email protected]>
> ---
> dev/null |binary
> dev/null |binary
> drivers/pci/hotplug/pciehprm_acpi.c | 257 ---------------------------------
> drivers/pci/hotplug/pciehprm_nonacpi.c | 47 ------
> drivers/pci/hotplug/shpchprm_acpi.c | 186 -----------------------
> drivers/pci/hotplug/shpchprm_legacy.c | 54 ------
> drivers/pci/hotplug/shpchprm_nonacpi.c | 57 -------
> drivers/pci/hotplug/Makefile | 17 --
> drivers/pci/hotplug/acpi_pcihp.c | 201 +++++++++++++++++++++++++
> drivers/pci/hotplug/acpiphp_glue.c | 28 ---
> drivers/pci/hotplug/pci_hotplug.h | 17 ++
> drivers/pci/hotplug/pciehp.h | 19 +-
> drivers/pci/hotplug/pciehp_hpc.c | 69 ++++++++
> drivers/pci/hotplug/shpchp.h | 25 +--
> drivers/pci/hotplug/shpchp_core.c | 17 ++
> 13 files changed, 331 insertions(+), 663 deletions(-)
>
> --- 2.6-git-gregkh.orig/drivers/pci/hotplug/Makefile
> +++ 2.6-git-gregkh/drivers/pci/hotplug/Makefile
> @@ -22,6 +22,9 @@ ifdef CONFIG_HOTPLUG_PCI_CPCI
> pci_hotplug-objs += cpci_hotplug_core.o \
> cpci_hotplug_pci.o
> endif
> +ifdef CONFIG_ACPI
> +pci_hotplug-objs += acpi_pcihp.o
> +endif
>
> cpqphp-objs := cpqphp_core.o \
> cpqphp_ctrl.o \
> @@ -51,23 +54,9 @@ pciehp-objs := pciehp_core.o \
> pciehp_ctrl.o \
> pciehp_pci.o \
> pciehp_hpc.o
> -ifdef CONFIG_ACPI
> - pciehp-objs += pciehprm_acpi.o
> -else
> - pciehp-objs += pciehprm_nonacpi.o
> -endif
>
> shpchp-objs := shpchp_core.o \
> shpchp_ctrl.o \
> shpchp_pci.o \
> shpchp_sysfs.o \
> shpchp_hpc.o
> -ifdef CONFIG_ACPI
> - shpchp-objs += shpchprm_acpi.o
> -else
> - ifdef CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY
> - shpchp-objs += shpchprm_legacy.o
> - else
> - shpchp-objs += shpchprm_nonacpi.o
> - endif
> -endif
> --- /dev/null
> +++ 2.6-git-gregkh/drivers/pci/hotplug/acpi_pcihp.c
> @@ -0,0 +1,201 @@
> +/*
> + * ACPI related functions for PCI hotplug drivers
> + *
> + * Copyright (C) 2006 Intel Corporation
> + *
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
> + * NON INFRINGEMENT. See the GNU General Public License for more
> + * details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + *
> + * Send feedback to <[email protected]>
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +#include <linux/pci.h>
> +#include <acpi/acpi.h>
> +#include <acpi/acpi_bus.h>
> +#include <acpi/actypes.h>
> +#include "pci_hotplug.h"
> +
> +#define METHOD_NAME__SUN "_SUN"
> +#define METHOD_NAME__HPP "_HPP"
> +#define METHOD_NAME_OSHP "OSHP"
> +
> +u8 * acpi_path_name( acpi_handle handle)
> +{
> + acpi_status status;
> + static u8 path_name[ACPI_PATHNAME_MAX];
> + struct acpi_buffer ret_buf = { ACPI_PATHNAME_MAX, path_name };
> +
> + memset(path_name, 0, sizeof (path_name));
> + status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &ret_buf);
> +
> + if (ACPI_FAILURE(status))
> + return NULL;
> + else
> + return path_name;
> +}
> +EXPORT_SYMBOL_GPL(acpi_path_name);
> +
> +static acpi_status
> +acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
> +{
> + acpi_status status;
> + u8 nui[4];
> + struct acpi_buffer ret_buf = { 0, NULL};
> + union acpi_object *ext_obj, *package;
> + u8 *path_name = acpi_path_name(handle);
> + int i, len = 0;
> +
> + /* get _hpp */
> + status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf);
> + switch (status) {
> + case AE_BUFFER_OVERFLOW:
> + ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL);
> + if (!ret_buf.pointer) {
> + printk(KERN_ERR "%s:%s alloc for _HPP fail\n",
> + __FUNCTION__, path_name);
> + return AE_NO_MEMORY;
> + }
> + status = acpi_evaluate_object(handle, METHOD_NAME__HPP,
> + NULL, &ret_buf);
> + if (ACPI_SUCCESS(status))
> + break;
> + default:
> + if (ACPI_FAILURE(status)) {
> + pr_debug("%s:%s _HPP fail=0x%x\n", __FUNCTION__,
> + path_name, status);
> + return status;
> + }
> + }
> +
> + ext_obj = (union acpi_object *) ret_buf.pointer;
> + if (ext_obj->type != ACPI_TYPE_PACKAGE) {
> + printk(KERN_ERR "%s:%s _HPP obj not a package\n", __FUNCTION__,
> + path_name);
> + status = AE_ERROR;
> + goto free_and_return;
> + }
> +
> + len = ext_obj->package.count;
> + package = (union acpi_object *) ret_buf.pointer;
> + for ( i = 0; (i < len) || (i < 4); i++) {
> + ext_obj = (union acpi_object *) &package->package.elements[i];
> + switch (ext_obj->type) {
> + case ACPI_TYPE_INTEGER:
> + nui[i] = (u8)ext_obj->integer.value;
> + break;
> + default:
> + printk(KERN_ERR "%s:%s _HPP obj type incorrect\n",
> + __FUNCTION__, path_name);
> + status = AE_ERROR;
> + goto free_and_return;
> + }
> + }
> +
> + hpp->cache_line_size = nui[0];
> + hpp->latency_timer = nui[1];
> + hpp->enable_serr = nui[2];
> + hpp->enable_perr = nui[3];
> +
> + pr_debug(" _HPP: cache_line_size=0x%x\n", hpp->cache_line_size);
> + pr_debug(" _HPP: latency timer =0x%x\n", hpp->latency_timer);
> + pr_debug(" _HPP: enable SERR =0x%x\n", hpp->enable_serr);
> + pr_debug(" _HPP: enable PERR =0x%x\n", hpp->enable_perr);
> +
> +free_and_return:
> + kfree(ret_buf.pointer);
> + return status;
> +}
> +
> +acpi_status acpi_run_oshp(acpi_handle handle)
> +{
> + acpi_status status;
> + u8 *path_name = acpi_path_name(handle);
> +
> + /* run OSHP */
> + status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
> + if (ACPI_FAILURE(status)) {
> + printk(KERN_ERR "%s:%s OSHP fails=0x%x\n", __FUNCTION__,
> + path_name, status);
> + } else {
> + pr_debug("%s:%s OSHP passes\n", __FUNCTION__, path_name);
> + }
> + return status;
> +}
> +EXPORT_SYMBOL_GPL(acpi_run_oshp);
> +
> +
> +
> +void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
> + struct hotplug_params *hpp)
> +{
> + acpi_status status = AE_NOT_FOUND;
> + struct pci_dev *pdev = dev;
> +
> + /*
> + * _HPP settings apply to all child buses, until another _HPP is
> + * encountered. If we don't find an _HPP for the input pci dev,
> + * look for it in the parent device scope since that would apply to
> + * this pci dev. If we don't find any _HPP, use hardcoded defaults
> + */
> + while (pdev && (ACPI_FAILURE(status))) {
> + acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));
> + if (!handle)
> + break;
> + status = acpi_run_hpp(handle, hpp);
> + if (!(pdev->bus->parent))
> + break;
> + /* Check if a parent object supports _HPP */
> + pdev = pdev->bus->parent->self;
> + }
> +}
> +EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);
> +
> +
> +
> +int is_root_bridge(acpi_handle handle)
> +{
> + acpi_status status;
> + struct acpi_device_info *info;
> + struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
> + int i;
> +
> + status = acpi_get_object_info(handle, &buffer);
> + if (ACPI_SUCCESS(status)) {
> + info = buffer.pointer;
> + if ((info->valid & ACPI_VALID_HID) &&
> + !strcmp(PCI_ROOT_HID_STRING,
> + info->hardware_id.value)) {
> + acpi_os_free(buffer.pointer);
> + return 1;
> + }
> + if (info->valid & ACPI_VALID_CID) {
> + for (i=0; i < info->compatibility_id.count; i++) {
> + if (!strcmp(PCI_ROOT_HID_STRING,
> + info->compatibility_id.id[i].value)) {
> + acpi_os_free(buffer.pointer);
> + return 1;
> + }
> + }
> + }
> + }
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(is_root_bridge);
> --- 2.6-git-gregkh.orig/drivers/pci/hotplug/acpiphp_glue.c
> +++ 2.6-git-gregkh/drivers/pci/hotplug/acpiphp_glue.c
> @@ -1408,34 +1408,6 @@ void handle_hotplug_event_func(acpi_hand
> }
> }
>
> -static int is_root_bridge(acpi_handle handle)
> -{
> - acpi_status status;
> - struct acpi_device_info *info;
> - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
> - int i;
> -
> - status = acpi_get_object_info(handle, &buffer);
> - if (ACPI_SUCCESS(status)) {
> - info = buffer.pointer;
> - if ((info->valid & ACPI_VALID_HID) &&
> - !strcmp(PCI_ROOT_HID_STRING,
> - info->hardware_id.value)) {
> - acpi_os_free(buffer.pointer);
> - return 1;
> - }
> - if (info->valid & ACPI_VALID_CID) {
> - for (i=0; i < info->compatibility_id.count; i++) {
> - if (!strcmp(PCI_ROOT_HID_STRING,
> - info->compatibility_id.id[i].value)) {
> - acpi_os_free(buffer.pointer);
> - return 1;
> - }
> - }
> - }
> - }
> - return 0;
> -}
>
> static acpi_status
> find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
> --- 2.6-git-gregkh.orig/drivers/pci/hotplug/pci_hotplug.h
> +++ 2.6-git-gregkh/drivers/pci/hotplug/pci_hotplug.h
> @@ -176,5 +176,22 @@ extern int pci_hp_change_slot_info (stru
> struct hotplug_slot_info *info);
> extern struct subsystem pci_hotplug_slots_subsys;
>
> +struct hotplug_params {
> + u8 cache_line_size;
> + u8 latency_timer;
> + u8 enable_serr;
> + u8 enable_perr;
> +};
> +
> +#ifdef CONFIG_ACPI
> +#include <acpi/acpi.h>
> +#include <acpi/acpi_bus.h>
> +#include <acpi/actypes.h>
> +extern acpi_status acpi_run_oshp(acpi_handle handle);
> +extern void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
> + struct hotplug_params *hpp);
> +extern u8 * acpi_path_name( acpi_handle handle);
> +int is_root_bridge(acpi_handle handle);
> +#endif
> #endif
>
> --- 2.6-git-gregkh.orig/drivers/pci/hotplug/pciehp.h
> +++ 2.6-git-gregkh/drivers/pci/hotplug/pciehp.h
> @@ -50,12 +50,6 @@ extern int pciehp_force;
> #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
> #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
>
> -struct hotplug_params {
> - u8 cache_line_size;
> - u8 latency_timer;
> - u8 enable_serr;
> - u8 enable_perr;
> -};
>
> struct slot {
> struct slot *next;
> @@ -192,9 +186,6 @@ extern u8 pciehp_handle_power_fault (u8
> /* pci functions */
> extern int pciehp_configure_device (struct slot *p_slot);
> extern int pciehp_unconfigure_device (struct slot *p_slot);
> -extern int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev);
> -extern void pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
> - struct hotplug_params *hpp);
>
>
>
> @@ -286,4 +277,14 @@ struct hpc_ops {
> int (*check_lnk_status) (struct controller *ctrl);
> };
>
> +
> +#ifdef CONFIG_ACPI
> +#define pciehp_get_hp_hw_control_from_firmware(dev) \
> + pciehp_acpi_get_hp_hw_control_from_firmware(dev)
> +#define pciehp_get_hp_params_from_firmware(dev, hpp) \
> + acpi_get_hp_params_from_firmware(dev, hpp)
> +#else
> +#define pciehp_get_hp_hw_control_from_firmware(dev) 0
> +#define acpi_get_hp_params_from_firmware(dev, hpp)
> +#endif /* CONFIG_ACPI */
> #endif /* _PCIEHP_H */
> --- 2.6-git-gregkh.orig/drivers/pci/hotplug/pciehp_hpc.c
> +++ 2.6-git-gregkh/drivers/pci/hotplug/pciehp_hpc.c
> @@ -38,6 +38,9 @@
>
> #include "../pci.h"
> #include "pciehp.h"
> +#ifdef CONFIG_ACPI
> +#include <linux/pci-acpi.h>
> +#endif
>
> #ifdef DEBUG
> #define DBG_K_TRACE_ENTRY ((unsigned int)0x00000001) /* On function entry */
> @@ -1236,6 +1239,72 @@ static struct hpc_ops pciehp_hpc_ops = {
> .check_lnk_status = hpc_check_lnk_status,
> };
>
> +#ifdef CONFIG_ACPI
> +int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev)
> +{
> + acpi_status status;
> + acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
> + struct pci_dev *pdev = dev;
> + struct pci_bus *parent;
> + u8 *path_name;
> +
> + /*
> + * Per PCI firmware specification, we should run the ACPI _OSC
> + * method to get control of hotplug hardware before using it.
> + * If an _OSC is missing, we look for an OSHP to do the same thing.
> + * To handle different BIOS behavior, we look for _OSC and OSHP
> + * within the scope of the hotplug controller and its parents, upto
> + * the host bridge under which this controller exists.
> + */
> + while (!handle) {
> + /*
> + * This hotplug controller was not listed in the ACPI name
> + * space at all. Try to get acpi handle of parent pci bus.
> + */
> + if (!pdev || !pdev->bus->parent)
> + break;
> + parent = pdev->bus->parent;
> + dbg("Could not find %s in acpi namespace, trying parent\n",
> + pci_name(pdev));
> + if (!parent->self)
> + /* Parent must be a host bridge */
> + handle = acpi_get_pci_rootbridge_handle(
> + pci_domain_nr(parent),
> + parent->number);
> + else
> + handle = DEVICE_ACPI_HANDLE(
> + &(parent->self->dev));
> + pdev = parent->self;
> + }
> +
> + while (handle) {
> + path_name = acpi_path_name(handle);
> + dbg("Trying to get hotplug control for %s \n", path_name);
> + status = pci_osc_control_set(handle,
> + OSC_PCI_EXPRESS_NATIVE_HP_CONTROL);
> + if (status == AE_NOT_FOUND)
> + status = acpi_run_oshp(handle);
> + if (ACPI_SUCCESS(status)) {
> + dbg("Gained control for hotplug HW for pci %s (%s)\n",
> + pci_name(dev), path_name);
> + return 0;
> + }
> + if (is_root_bridge(handle))
> + break;
> + chandle = handle;
> + status = acpi_get_parent(chandle, &handle);
> + if (ACPI_FAILURE(status))
> + break;
> + }
> +
> + err("Cannot get control of hotplug hardware for pci %s\n",
> + pci_name(dev));
> + return -1;
> +}
> +#endif
> +
> +
> +
> int pcie_init(struct controller * ctrl, struct pcie_device *dev)
> {
> struct php_ctlr_state_s *php_ctlr, *p;
> --- 2.6-git-gregkh.orig/drivers/pci/hotplug/pciehprm_acpi.c
> +++ /dev/null
> @@ -1,257 +0,0 @@
> -/*
> - * PCIEHPRM ACPI: PHP Resource Manager for ACPI platform
> - *
> - * Copyright (C) 2003-2004 Intel Corporation
> - *
> - * All rights reserved.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or (at
> - * your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful, but
> - * WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
> - * NON INFRINGEMENT. See the GNU General Public License for more
> - * details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> - *
> - * Send feedback to <[email protected]>
> - *
> - */
> -
> -#include <linux/module.h>
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -#include <linux/pci.h>
> -#include <linux/acpi.h>
> -#include <linux/pci-acpi.h>
> -#include <acpi/acpi_bus.h>
> -#include <acpi/actypes.h>
> -#include "pciehp.h"
> -
> -#define METHOD_NAME__SUN "_SUN"
> -#define METHOD_NAME__HPP "_HPP"
> -#define METHOD_NAME_OSHP "OSHP"
> -
> -static u8 * acpi_path_name( acpi_handle handle)
> -{
> - acpi_status status;
> - static u8 path_name[ACPI_PATHNAME_MAX];
> - struct acpi_buffer ret_buf = { ACPI_PATHNAME_MAX, path_name };
> -
> - memset(path_name, 0, sizeof (path_name));
> - status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &ret_buf);
> -
> - if (ACPI_FAILURE(status))
> - return NULL;
> - else
> - return path_name;
> -}
> -
> -static acpi_status
> -acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
> -{
> - acpi_status status;
> - u8 nui[4];
> - struct acpi_buffer ret_buf = { 0, NULL};
> - union acpi_object *ext_obj, *package;
> - u8 *path_name = acpi_path_name(handle);
> - int i, len = 0;
> -
> - /* get _hpp */
> - status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf);
> - switch (status) {
> - case AE_BUFFER_OVERFLOW:
> - ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL);
> - if (!ret_buf.pointer) {
> - err ("%s:%s alloc for _HPP fail\n", __FUNCTION__,
> - path_name);
> - return AE_NO_MEMORY;
> - }
> - status = acpi_evaluate_object(handle, METHOD_NAME__HPP,
> - NULL, &ret_buf);
> - if (ACPI_SUCCESS(status))
> - break;
> - default:
> - if (ACPI_FAILURE(status)) {
> - dbg("%s:%s _HPP fail=0x%x\n", __FUNCTION__,
> - path_name, status);
> - return status;
> - }
> - }
> -
> - ext_obj = (union acpi_object *) ret_buf.pointer;
> - if (ext_obj->type != ACPI_TYPE_PACKAGE) {
> - err ("%s:%s _HPP obj not a package\n", __FUNCTION__,
> - path_name);
> - status = AE_ERROR;
> - goto free_and_return;
> - }
> -
> - len = ext_obj->package.count;
> - package = (union acpi_object *) ret_buf.pointer;
> - for ( i = 0; (i < len) || (i < 4); i++) {
> - ext_obj = (union acpi_object *) &package->package.elements[i];
> - switch (ext_obj->type) {
> - case ACPI_TYPE_INTEGER:
> - nui[i] = (u8)ext_obj->integer.value;
> - break;
> - default:
> - err ("%s:%s _HPP obj type incorrect\n", __FUNCTION__,
> - path_name);
> - status = AE_ERROR;
> - goto free_and_return;
> - }
> - }
> -
> - hpp->cache_line_size = nui[0];
> - hpp->latency_timer = nui[1];
> - hpp->enable_serr = nui[2];
> - hpp->enable_perr = nui[3];
> -
> - dbg(" _HPP: cache_line_size=0x%x\n", hpp->cache_line_size);
> - dbg(" _HPP: latency timer =0x%x\n", hpp->latency_timer);
> - dbg(" _HPP: enable SERR =0x%x\n", hpp->enable_serr);
> - dbg(" _HPP: enable PERR =0x%x\n", hpp->enable_perr);
> -
> -free_and_return:
> - kfree(ret_buf.pointer);
> - return status;
> -}
> -
> -static acpi_status acpi_run_oshp(acpi_handle handle)
> -{
> - acpi_status status;
> - u8 *path_name = acpi_path_name(handle);
> -
> - /* run OSHP */
> - status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
> - if (ACPI_FAILURE(status)) {
> - dbg("%s:%s OSHP fails=0x%x\n", __FUNCTION__, path_name,
> - status);
> - } else {
> - dbg("%s:%s OSHP passes\n", __FUNCTION__, path_name);
> - }
> - return status;
> -}
> -
> -static int is_root_bridge(acpi_handle handle)
> -{
> - acpi_status status;
> - struct acpi_device_info *info;
> - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
> - int i;
> -
> - status = acpi_get_object_info(handle, &buffer);
> - if (ACPI_SUCCESS(status)) {
> - info = buffer.pointer;
> - if ((info->valid & ACPI_VALID_HID) &&
> - !strcmp(PCI_ROOT_HID_STRING,
> - info->hardware_id.value)) {
> - acpi_os_free(buffer.pointer);
> - return 1;
> - }
> - if (info->valid & ACPI_VALID_CID) {
> - for (i=0; i < info->compatibility_id.count; i++) {
> - if (!strcmp(PCI_ROOT_HID_STRING,
> - info->compatibility_id.id[i].value)) {
> - acpi_os_free(buffer.pointer);
> - return 1;
> - }
> - }
> - }
> - }
> - return 0;
> -}
> -
> -int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
> -{
> - acpi_status status;
> - acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
> - struct pci_dev *pdev = dev;
> - struct pci_bus *parent;
> - u8 *path_name;
> -
> - /*
> - * Per PCI firmware specification, we should run the ACPI _OSC
> - * method to get control of hotplug hardware before using it.
> - * If an _OSC is missing, we look for an OSHP to do the same thing.
> - * To handle different BIOS behavior, we look for _OSC and OSHP
> - * within the scope of the hotplug controller and its parents, upto
> - * the host bridge under which this controller exists.
> - */
> - while (!handle) {
> - /*
> - * This hotplug controller was not listed in the ACPI name
> - * space at all. Try to get acpi handle of parent pci bus.
> - */
> - if (!pdev || !pdev->bus->parent)
> - break;
> - parent = pdev->bus->parent;
> - dbg("Could not find %s in acpi namespace, trying parent\n",
> - pci_name(pdev));
> - if (!parent->self)
> - /* Parent must be a host bridge */
> - handle = acpi_get_pci_rootbridge_handle(
> - pci_domain_nr(parent),
> - parent->number);
> - else
> - handle = DEVICE_ACPI_HANDLE(
> - &(parent->self->dev));
> - pdev = parent->self;
> - }
> -
> - while (handle) {
> - path_name = acpi_path_name(handle);
> - dbg("Trying to get hotplug control for %s \n", path_name);
> - status = pci_osc_control_set(handle,
> - OSC_PCI_EXPRESS_NATIVE_HP_CONTROL);
> - if (status == AE_NOT_FOUND)
> - status = acpi_run_oshp(handle);
> - if (ACPI_SUCCESS(status)) {
> - dbg("Gained control for hotplug HW for pci %s (%s)\n",
> - pci_name(dev), path_name);
> - return 0;
> - }
> - if (is_root_bridge(handle))
> - break;
> - chandle = handle;
> - status = acpi_get_parent(chandle, &handle);
> - if (ACPI_FAILURE(status))
> - break;
> - }
> -
> - err("Cannot get control of hotplug hardware for pci %s\n",
> - pci_name(dev));
> - return -1;
> -}
> -
> -void pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
> - struct hotplug_params *hpp)
> -{
> - acpi_status status = AE_NOT_FOUND;
> - struct pci_dev *pdev = dev;
> -
> - /*
> - * _HPP settings apply to all child buses, until another _HPP is
> - * encountered. If we don't find an _HPP for the input pci dev,
> - * look for it in the parent device scope since that would apply to
> - * this pci dev. If we don't find any _HPP, use hardcoded defaults
> - */
> - while (pdev && (ACPI_FAILURE(status))) {
> - acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));
> - if (!handle)
> - break;
> - status = acpi_run_hpp(handle, hpp);
> - if (!(pdev->bus->parent))
> - break;
> - /* Check if a parent object supports _HPP */
> - pdev = pdev->bus->parent->self;
> - }
> -}
> -
> --- 2.6-git-gregkh.orig/drivers/pci/hotplug/pciehprm_nonacpi.c
> +++ /dev/null
> @@ -1,47 +0,0 @@
> -/*
> - * PCIEHPRM NONACPI: PHP Resource Manager for Non-ACPI/Legacy platform
> - *
> - * Copyright (C) 1995,2001 Compaq Computer Corporation
> - * Copyright (C) 2001 Greg Kroah-Hartman ([email protected])
> - * Copyright (C) 2001 IBM Corp.
> - * Copyright (C) 2003-2004 Intel Corporation
> - *
> - * All rights reserved.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or (at
> - * your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful, but
> - * WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
> - * NON INFRINGEMENT. See the GNU General Public License for more
> - * details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> - *
> - * Send feedback to <[email protected]>, <[email protected]>
> - *
> - */
> -
> -#include <linux/module.h>
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -#include <linux/sched.h>
> -#include <linux/pci.h>
> -#include <linux/slab.h>
> -#include "pciehp.h"
> -
> -void pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
> - struct hotplug_params *hpp)
> -{
> - return;
> -}
> -
> -int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
> -{
> - return 0;
> -}
> --- 2.6-git-gregkh.orig/drivers/pci/hotplug/shpchp.h
> +++ 2.6-git-gregkh/drivers/pci/hotplug/shpchp.h
> @@ -106,12 +106,6 @@ struct controller {
> volatile int cmd_busy;
> };
>
> -struct hotplug_params {
> - u8 cache_line_size;
> - u8 latency_timer;
> - u8 enable_serr;
> - u8 enable_perr;
> -};
>
> /* Define AMD SHPC ID */
> #define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450
> @@ -193,15 +187,24 @@ extern u8 shpchp_handle_power_fault(u8 h
> extern int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num);
> extern int shpchp_configure_device(struct slot *p_slot);
> extern int shpchp_unconfigure_device(struct slot *p_slot);
> -extern void get_hp_hw_control_from_firmware(struct pci_dev *dev);
> -extern void get_hp_params_from_firmware(struct pci_dev *dev,
> - struct hotplug_params *hpp);
> -extern int shpchprm_get_physical_slot_number(struct controller *ctrl,
> - u32 *sun, u8 busnum, u8 devnum);
> extern void shpchp_remove_ctrl_files(struct controller *ctrl);
> extern void cleanup_slots(struct controller *ctrl);
> extern void queue_pushbutton_work(void *data);
>
> +
> +#ifdef CONFIG_ACPI
> +#define get_hp_params_from_firmware(dev, hpp) \
> + acpi_get_hp_params_from_firmware(dev, hpp)
> +#define get_hp_hw_control_from_firmware(pdev) \
> + do { \
> + if (DEVICE_ACPI_HANDLE(&(pdev->dev))) \
> + acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev))); \
> + } while (0)
> +#else
> +#define get_hp_params_from_firmware(dev, hpp)
> +#define get_hp_hw_control_from_firmware(dev)
> +#endif
> +
> struct ctrl_reg {
> volatile u32 base_offset;
> volatile u32 slot_avail1;
> --- 2.6-git-gregkh.orig/drivers/pci/hotplug/shpchp_core.c
> +++ 2.6-git-gregkh/drivers/pci/hotplug/shpchp_core.c
> @@ -104,6 +104,23 @@ static void make_slot_name(struct slot *
> slot->bus, slot->number);
> }
>
> +
> +
> +
> +static int
> +shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun,
> + u8 busnum, u8 devnum)
> +{
> + int offset = devnum - ctrl->slot_device_offset;
> +
> + dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__,
> + ctrl->slot_num_inc, offset);
> + *sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc *offset);
> + return 0;
> +}
> +
> +
> +
> static int init_slots(struct controller *ctrl)
> {
> struct slot *slot;
> --- 2.6-git-gregkh.orig/drivers/pci/hotplug/shpchprm_acpi.c
> +++ /dev/null
> @@ -1,186 +0,0 @@
> -/*
> - * SHPCHPRM ACPI: PHP Resource Manager for ACPI platform
> - *
> - * Copyright (C) 2003-2004 Intel Corporation
> - *
> - * All rights reserved.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or (at
> - * your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful, but
> - * WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
> - * NON INFRINGEMENT. See the GNU General Public License for more
> - * details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> - *
> - * Send feedback to <[email protected]>
> - *
> - */
> -
> -#include <linux/module.h>
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -#include <linux/pci.h>
> -#include <acpi/acpi.h>
> -#include <acpi/acpi_bus.h>
> -#include <acpi/actypes.h>
> -#include "shpchp.h"
> -
> -#define METHOD_NAME__SUN "_SUN"
> -#define METHOD_NAME__HPP "_HPP"
> -#define METHOD_NAME_OSHP "OSHP"
> -
> -static u8 * acpi_path_name( acpi_handle handle)
> -{
> - acpi_status status;
> - static u8 path_name[ACPI_PATHNAME_MAX];
> - struct acpi_buffer ret_buf = { ACPI_PATHNAME_MAX, path_name };
> -
> - memset(path_name, 0, sizeof (path_name));
> - status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &ret_buf);
> -
> - if (ACPI_FAILURE(status))
> - return NULL;
> - else
> - return path_name;
> -}
> -
> -static acpi_status
> -acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
> -{
> - acpi_status status;
> - u8 nui[4];
> - struct acpi_buffer ret_buf = { 0, NULL};
> - union acpi_object *ext_obj, *package;
> - u8 *path_name = acpi_path_name(handle);
> - int i, len = 0;
> -
> - /* get _hpp */
> - status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf);
> - switch (status) {
> - case AE_BUFFER_OVERFLOW:
> - ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL);
> - if (!ret_buf.pointer) {
> - err ("%s:%s alloc for _HPP fail\n", __FUNCTION__,
> - path_name);
> - return AE_NO_MEMORY;
> - }
> - status = acpi_evaluate_object(handle, METHOD_NAME__HPP,
> - NULL, &ret_buf);
> - if (ACPI_SUCCESS(status))
> - break;
> - default:
> - if (ACPI_FAILURE(status)) {
> - dbg("%s:%s _HPP fail=0x%x\n", __FUNCTION__,
> - path_name, status);
> - return status;
> - }
> - }
> -
> - ext_obj = (union acpi_object *) ret_buf.pointer;
> - if (ext_obj->type != ACPI_TYPE_PACKAGE) {
> - err ("%s:%s _HPP obj not a package\n", __FUNCTION__,
> - path_name);
> - status = AE_ERROR;
> - goto free_and_return;
> - }
> -
> - len = ext_obj->package.count;
> - package = (union acpi_object *) ret_buf.pointer;
> - for ( i = 0; (i < len) || (i < 4); i++) {
> - ext_obj = (union acpi_object *) &package->package.elements[i];
> - switch (ext_obj->type) {
> - case ACPI_TYPE_INTEGER:
> - nui[i] = (u8)ext_obj->integer.value;
> - break;
> - default:
> - err ("%s:%s _HPP obj type incorrect\n", __FUNCTION__,
> - path_name);
> - status = AE_ERROR;
> - goto free_and_return;
> - }
> - }
> -
> - hpp->cache_line_size = nui[0];
> - hpp->latency_timer = nui[1];
> - hpp->enable_serr = nui[2];
> - hpp->enable_perr = nui[3];
> -
> - dbg(" _HPP: cache_line_size=0x%x\n", hpp->cache_line_size);
> - dbg(" _HPP: latency timer =0x%x\n", hpp->latency_timer);
> - dbg(" _HPP: enable SERR =0x%x\n", hpp->enable_serr);
> - dbg(" _HPP: enable PERR =0x%x\n", hpp->enable_perr);
> -
> -free_and_return:
> - kfree(ret_buf.pointer);
> - return status;
> -}
> -
> -static void acpi_run_oshp(acpi_handle handle)
> -{
> - acpi_status status;
> - u8 *path_name = acpi_path_name(handle);
> -
> - /* run OSHP */
> - status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
> - if (ACPI_FAILURE(status)) {
> - err("%s:%s OSHP fails=0x%x\n", __FUNCTION__, path_name,
> - status);
> - } else {
> - dbg("%s:%s OSHP passes\n", __FUNCTION__, path_name);
> - }
> -}
> -
> -int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
> -{
> - int offset = devnum - ctrl->slot_device_offset;
> -
> - dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__, ctrl->slot_num_inc, offset);
> - *sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc *offset);
> - return 0;
> -}
> -
> -void get_hp_hw_control_from_firmware(struct pci_dev *dev)
> -{
> - /*
> - * OSHP is an optional ACPI firmware control method. If present,
> - * we need to run it to inform BIOS that we will control SHPC
> - * hardware from now on.
> - */
> - acpi_handle handle = DEVICE_ACPI_HANDLE(&(dev->dev));
> - if (!handle)
> - return;
> - acpi_run_oshp(handle);
> -}
> -
> -void get_hp_params_from_firmware(struct pci_dev *dev,
> - struct hotplug_params *hpp)
> -{
> - acpi_status status = AE_NOT_FOUND;
> - struct pci_dev *pdev = dev;
> -
> - /*
> - * _HPP settings apply to all child buses, until another _HPP is
> - * encountered. If we don't find an _HPP for the input pci dev,
> - * look for it in the parent device scope since that would apply to
> - * this pci dev. If we don't find any _HPP, use hardcoded defaults
> - */
> - while (pdev && (ACPI_FAILURE(status))) {
> - acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));
> - if (!handle)
> - break;
> - status = acpi_run_hpp(handle, hpp);
> - if (!(pdev->bus->parent))
> - break;
> - /* Check if a parent object supports _HPP */
> - pdev = pdev->bus->parent->self;
> - }
> -}
> -
> --- 2.6-git-gregkh.orig/drivers/pci/hotplug/shpchprm_legacy.c
> +++ /dev/null
> @@ -1,54 +0,0 @@
> -/*
> - * SHPCHPRM Legacy: PHP Resource Manager for Non-ACPI/Legacy platform
> - *
> - * Copyright (C) 1995,2001 Compaq Computer Corporation
> - * Copyright (C) 2001 Greg Kroah-Hartman ([email protected])
> - * Copyright (C) 2001 IBM Corp.
> - * Copyright (C) 2003-2004 Intel Corporation
> - *
> - * All rights reserved.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or (at
> - * your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful, but
> - * WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
> - * NON INFRINGEMENT. See the GNU General Public License for more
> - * details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> - *
> - * Send feedback to <[email protected]>,<[email protected]>
> - *
> - */
> -
> -#include <linux/module.h>
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -#include <linux/pci.h>
> -#include "shpchp.h"
> -
> -int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
> -{
> - int offset = devnum - ctrl->slot_device_offset;
> -
> - *sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc * offset);
> - return 0;
> -}
> -
> -void get_hp_params_from_firmware(struct pci_dev *dev,
> - struct hotplug_params *hpp)
> -{
> - return;
> -}
> -
> -void get_hp_hw_control_from_firmware(struct pci_dev *dev)
> -{
> - return;
> -}
> -
> --- 2.6-git-gregkh.orig/drivers/pci/hotplug/shpchprm_nonacpi.c
> +++ /dev/null
> @@ -1,57 +0,0 @@
> -/*
> - * SHPCHPRM NONACPI: PHP Resource Manager for Non-ACPI/Legacy platform
> - *
> - * Copyright (C) 1995,2001 Compaq Computer Corporation
> - * Copyright (C) 2001 Greg Kroah-Hartman ([email protected])
> - * Copyright (C) 2001 IBM Corp.
> - * Copyright (C) 2003-2004 Intel Corporation
> - *
> - * All rights reserved.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or (at
> - * your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful, but
> - * WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
> - * NON INFRINGEMENT. See the GNU General Public License for more
> - * details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> - *
> - * Send feedback to <[email protected]>, <[email protected]>
> - *
> - */
> -
> -#include <linux/config.h>
> -#include <linux/module.h>
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -#include <linux/pci.h>
> -#include <linux/slab.h>
> -
> -#include "shpchp.h"
> -
> -int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
> -{
> - int offset = devnum - ctrl->slot_device_offset;
> -
> - dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__, ctrl->slot_num_inc, offset);
> - *sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc * offset);
> - return 0;
> -}
> -
> -void get_hp_params_from_firmware(struct pci_dev *dev,
> - struct hotplug_params *hpp)
> -{
> - return;
> -}
> -
> -void get_hp_hw_control_from_firmware(struct pci_dev *dev)
> -{
> - return;
> -}
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by xPML, a groundbreaking scripting language
> that extends applications into web and mobile media. Attend the live webcast
> and join the prime developer group breaking into this new coding territory!
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
> _______________________________________________
> Pcihpd-discuss mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/pcihpd-discuss
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
