From: Tilman Schmidt <[email protected]>, Hansjoerg Lipp <[email protected]>
This patch adds the connection-specific module "usb_gigaset", the
hardware driver for Gigaset base stations connected via the M105 USB
DECT adapter. It contains the code for handling probe/disconnect, AT
command/response transmission, and call setup and termination, as well
as handling asynchronous data transfers, PPP framing, byte stuffing,
and flow control.
Signed-off-by: Hansjoerg Lipp <[email protected]>
Signed-off-by: Tilman Schmidt <[email protected]>
---
drivers/isdn/gigaset/asyncdata.c | 600 +++++++++++++++++++++++
drivers/isdn/gigaset/usb-gigaset.c | 964 +++++++++++++++++++++++++++++++++++++
2 files changed, 1564 insertions(+)
--- linux-2.6.16-rc4.orig/drivers/isdn/gigaset/usb-gigaset.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.16-rc4-mm2/drivers/isdn/gigaset/usb-gigaset.c 2006-02-24 00:19:28.000000000 +0100
@@ -0,0 +1,964 @@
+/*
+ * USB driver for Gigaset 307x directly or using M105 Data.
+ *
+ * Copyright (c) 2001 by Stefan Eilers <[email protected]>
+ * and Hansjoerg Lipp <[email protected]>.
+ *
+ * This driver was derived from the USB skeleton driver by
+ * Greg Kroah-Hartman <[email protected]>
+ *
+ * =====================================================================
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ * =====================================================================
+ */
+
+#include "gigaset.h"
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+/* Version Information */
+#define DRIVER_AUTHOR "Hansjoerg Lipp <[email protected]>, Stefan Eilers <[email protected]>"
+#define DRIVER_DESC "USB Driver for Gigaset 307x using M105"
+
+/* Module parameters */
+
+static int startmode = SM_ISDN;
+static int cidmode = 1;
+
+module_param(startmode, int, S_IRUGO);
+module_param(cidmode, int, S_IRUGO);
+MODULE_PARM_DESC(startmode, "start in isdn4linux mode");
+MODULE_PARM_DESC(cidmode, "Call-ID mode");
+
+#define GIGASET_MINORS 1
+#define GIGASET_MINOR 8
+#define GIGASET_MODULENAME "usb_gigaset"
+#define GIGASET_DEVFSNAME "gig/usb/"
+#define GIGASET_DEVNAME "ttyGU"
+
+#define IF_WRITEBUF 2000 //FIXME // WAKEUP_CHARS: 256
+
+/* Values for the Gigaset M105 Data */
+#define USB_M105_VENDOR_ID 0x0681
+#define USB_M105_PRODUCT_ID 0x0009
+
+/* table of devices that work with this driver */
+static struct usb_device_id gigaset_table [] = {
+ { USB_DEVICE(USB_M105_VENDOR_ID, USB_M105_PRODUCT_ID) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, gigaset_table);
+
+/*
+ * Control requests (empty fields: 00)
+ *
+ * RT|RQ|VALUE|INDEX|LEN |DATA
+ * In:
+ * C1 08 01
+ * Get flags (1 byte). Bits: 0=dtr,1=rts,3-7:?
+ * C1 0F ll ll
+ * Get device information/status (llll: 0x200 and 0x40 seen).
+ * Real size: I only saw MIN(llll,0x64).
+ * Contents: seems to be always the same...
+ * offset 0x00: Length of this structure (0x64) (len: 1,2,3 bytes)
+ * offset 0x3c: String (16 bit chars): "MCCI USB Serial V2.0"
+ * rest: ?
+ * Out:
+ * 41 11
+ * Initialize/reset device ?
+ * 41 00 xx 00
+ * ? (xx=00 or 01; 01 on start, 00 on close)
+ * 41 07 vv mm
+ * Set/clear flags vv=value, mm=mask (see RQ 08)
+ * 41 12 xx
+ * Used before the following configuration requests are issued
+ * (with xx=0x0f). I've seen other values<0xf, though.
+ * 41 01 xx xx
+ * Set baud rate. xxxx=ceil(0x384000/rate)=trunc(0x383fff/rate)+1.
+ * 41 03 ps bb
+ * Set byte size and parity. p: 0x20=even,0x10=odd,0x00=no parity
+ * [ 0x30: m, 0x40: s ]
+ * [s: 0: 1 stop bit; 1: 1.5; 2: 2]
+ * bb: bits/byte (seen 7 and 8)
+ * 41 13 -- -- -- -- 10 00 ww 00 00 00 xx 00 00 00 yy 00 00 00 zz 00 00 00
+ * ??
+ * Initialization: 01, 40, 00, 00
+ * Open device: 00 40, 00, 00
+ * yy and zz seem to be equal, either 0x00 or 0x0a
+ * (ww,xx) pairs seen: (00,00), (00,40), (01,40), (09,80), (19,80)
+ * 41 19 -- -- -- -- 06 00 00 00 00 xx 11 13
+ * Used after every "configuration sequence" (RQ 12, RQs 01/03/13).
+ * xx is usually 0x00 but was 0x7e before starting data transfer
+ * in unimodem mode. So, this might be an array of characters that need
+ * special treatment ("commit all bufferd data"?), 11=^Q, 13=^S.
+ *
+ * Unimodem mode: use "modprobe ppp_async flag_time=0" as the device _needs_ two
+ * flags per packet.
+ */
+
+static int gigaset_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+static void gigaset_disconnect(struct usb_interface *interface);
+
+static struct gigaset_driver *driver = NULL;
+static struct cardstate *cardstate = NULL;
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver gigaset_usb_driver = {
+ .name = GIGASET_MODULENAME,
+ .probe = gigaset_probe,
+ .disconnect = gigaset_disconnect,
+ .id_table = gigaset_table,
+};
+
+struct usb_cardstate {
+ struct usb_device *udev; /* usb device pointer */
+ struct usb_interface *interface; /* interface for this device */
+ atomic_t busy; /* bulk output in progress */
+
+ /* Output buffer */
+ unsigned char *bulk_out_buffer;
+ int bulk_out_size;
+ __u8 bulk_out_endpointAddr;
+ struct urb *bulk_out_urb;
+
+ /* Input buffer */
+ int rcvbuf_size;
+ struct urb *read_urb;
+ __u8 int_in_endpointAddr;
+
+ char bchars[6]; /* for request 0x19 */
+};
+
+struct usb_bc_state {};
+
+static inline unsigned tiocm_to_gigaset(unsigned state)
+{
+ return ((state & TIOCM_DTR) ? 1 : 0) | ((state & TIOCM_RTS) ? 2 : 0);
+}
+
+#ifdef CONFIG_GIGASET_UNDOCREQ
+/* WARNING: EXPERIMENTAL! */
+static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
+ unsigned new_state)
+{
+ struct usb_device *udev = cs->hw.usb->udev;
+ unsigned mask, val;
+ int r;
+
+ mask = tiocm_to_gigaset(old_state ^ new_state);
+ val = tiocm_to_gigaset(new_state);
+
+ gig_dbg(DEBUG_USBREQ, "set flags 0x%02x with mask 0x%02x", val, mask);
+ // don't use this in an interrupt/BH
+ r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 7, 0x41,
+ (val & 0xff) | ((mask & 0xff) << 8), 0,
+ NULL, 0, 2000 /* timeout? */);
+ if (r < 0)
+ return r;
+ //..
+ return 0;
+}
+
+static int set_value(struct cardstate *cs, u8 req, u16 val)
+{
+ struct usb_device *udev = cs->hw.usb->udev;
+ int r, r2;
+
+ gig_dbg(DEBUG_USBREQ, "request %02x (%04x)",
+ (unsigned)req, (unsigned)val);
+ r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x12, 0x41,
+ 0xf /*?*/, 0, NULL, 0, 2000 /*?*/);
+ /* no idea what this does */
+ if (r < 0) {
+ dev_err(&udev->dev, "error %d on request 0x12\n", -r);
+ return r;
+ }
+
+ r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), req, 0x41,
+ val, 0, NULL, 0, 2000 /*?*/);
+ if (r < 0)
+ dev_err(&udev->dev, "error %d on request 0x%02x\n",
+ -r, (unsigned)req);
+
+ r2 = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
+ 0, 0, cs->hw.usb->bchars, 6, 2000 /*?*/);
+ if (r2 < 0)
+ dev_err(&udev->dev, "error %d on request 0x19\n", -r2);
+
+ return r < 0 ? r : (r2 < 0 ? r2 : 0);
+}
+
+/* WARNING: HIGHLY EXPERIMENTAL! */
+// don't use this in an interrupt/BH
+static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
+{
+ u16 val;
+ u32 rate;
+
+ cflag &= CBAUD;
+
+ switch (cflag) {
+ //FIXME more values?
+ case B300: rate = 300; break;
+ case B600: rate = 600; break;
+ case B1200: rate = 1200; break;
+ case B2400: rate = 2400; break;
+ case B4800: rate = 4800; break;
+ case B9600: rate = 9600; break;
+ case B19200: rate = 19200; break;
+ case B38400: rate = 38400; break;
+ case B57600: rate = 57600; break;
+ case B115200: rate = 115200; break;
+ default:
+ rate = 9600;
+ dev_err(cs->dev, "unsupported baudrate request 0x%x,"
+ " using default of B9600\n", cflag);
+ }
+
+ val = 0x383fff / rate + 1;
+
+ return set_value(cs, 1, val);
+}
+
+/* WARNING: HIGHLY EXPERIMENTAL! */
+// don't use this in an interrupt/BH
+static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
+{
+ u16 val = 0;
+
+ /* set the parity */
+ if (cflag & PARENB)
+ val |= (cflag & PARODD) ? 0x10 : 0x20;
+
+ /* set the number of data bits */
+ switch (cflag & CSIZE) {
+ case CS5:
+ val |= 5 << 8; break;
+ case CS6:
+ val |= 6 << 8; break;
+ case CS7:
+ val |= 7 << 8; break;
+ case CS8:
+ val |= 8 << 8; break;
+ default:
+ dev_err(cs->dev, "CSIZE was not CS5-CS8, using default of 8\n");
+ val |= 8 << 8;
+ break;
+ }
+
+ /* set the number of stop bits */
+ if (cflag & CSTOPB) {
+ if ((cflag & CSIZE) == CS5)
+ val |= 1; /* 1.5 stop bits */ //FIXME is this okay?
+ else
+ val |= 2; /* 2 stop bits */
+ }
+
+ return set_value(cs, 3, val);
+}
+
+#else
+static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
+ unsigned new_state)
+{
+ return -EINVAL;
+}
+
+static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
+{
+ return -EINVAL;
+}
+
+static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
+{
+ return -EINVAL;
+}
+#endif
+
+
+ /*================================================================================================================*/
+static int gigaset_init_bchannel(struct bc_state *bcs)
+{
+ /* nothing to do for M10x */
+ gigaset_bchannel_up(bcs);
+ return 0;
+}
+
+static int gigaset_close_bchannel(struct bc_state *bcs)
+{
+ /* nothing to do for M10x */
+ gigaset_bchannel_down(bcs);
+ return 0;
+}
+
+static int write_modem(struct cardstate *cs);
+static int send_cb(struct cardstate *cs, struct cmdbuf_t *cb);
+
+
+/* Write tasklet handler: Continue sending current skb, or send command, or
+ * start sending an skb from the send queue.
+ */
+static void gigaset_modem_fill(unsigned long data)
+{
+ struct cardstate *cs = (struct cardstate *) data;
+ struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
+ struct cmdbuf_t *cb;
+ unsigned long flags;
+ int again;
+
+ gig_dbg(DEBUG_OUTPUT, "modem_fill");
+
+ if (atomic_read(&cs->hw.usb->busy)) {
+ gig_dbg(DEBUG_OUTPUT, "modem_fill: busy");
+ return;
+ }
+
+ do {
+ again = 0;
+ if (!bcs->tx_skb) { /* no skb is being sent */
+ spin_lock_irqsave(&cs->cmdlock, flags);
+ cb = cs->cmdbuf;
+ spin_unlock_irqrestore(&cs->cmdlock, flags);
+ if (cb) { /* commands to send? */
+ gig_dbg(DEBUG_OUTPUT, "modem_fill: cb");
+ if (send_cb(cs, cb) < 0) {
+ gig_dbg(DEBUG_OUTPUT,
+ "modem_fill: send_cb failed");
+ again = 1; /* no callback will be
+ called! */
+ }
+ } else { /* skbs to send? */
+ bcs->tx_skb = skb_dequeue(&bcs->squeue);
+ if (bcs->tx_skb)
+ gig_dbg(DEBUG_INTR,
+ "Dequeued skb (Adr: %lx)!",
+ (unsigned long) bcs->tx_skb);
+ }
+ }
+
+ if (bcs->tx_skb) {
+ gig_dbg(DEBUG_OUTPUT, "modem_fill: tx_skb");
+ if (write_modem(cs) < 0) {
+ gig_dbg(DEBUG_OUTPUT,
+ "modem_fill: write_modem failed");
+ // FIXME should we tell the LL?
+ again = 1; /* no callback will be called! */
+ }
+ }
+ } while (again);
+}
+
+/**
+ * gigaset_read_int_callback
+ *
+ * It is called if the data was received from the device.
+ */
+static void gigaset_read_int_callback(struct urb *urb, struct pt_regs *regs)
+{
+ int resubmit = 0;
+ int r;
+ struct cardstate *cs;
+ unsigned numbytes;
+ unsigned char *src;
+ struct inbuf_t *inbuf;
+
+ IFNULLRET(urb);
+ inbuf = (struct inbuf_t *) urb->context;
+ IFNULLRET(inbuf);
+ cs = inbuf->cs;
+ IFNULLRET(cs);
+
+ if (!atomic_read(&cs->connected)) {
+ err("%s: disconnected", __func__);
+ return;
+ }
+
+ if (!urb->status) {
+ numbytes = urb->actual_length;
+
+ if (numbytes) {
+ src = inbuf->rcvbuf;
+ if (unlikely(*src))
+ dev_warn(cs->dev,
+ "%s: There was no leading 0, but 0x%02x!\n",
+ __func__, (unsigned) *src);
+ ++src; /* skip leading 0x00 */
+ --numbytes;
+ if (gigaset_fill_inbuf(inbuf, src, numbytes)) {
+ gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
+ gigaset_schedule_event(inbuf->cs);
+ }
+ } else
+ gig_dbg(DEBUG_INTR, "Received zero block length");
+ resubmit = 1;
+ } else {
+ /* The urb might have been killed. */
+ gig_dbg(DEBUG_ANY, "%s - nonzero read bulk status received: %d",
+ __func__, urb->status);
+ if (urb->status != -ENOENT) /* not killed */
+ resubmit = 1;
+ }
+
+ if (resubmit) {
+ r = usb_submit_urb(urb, SLAB_ATOMIC);
+ if (r)
+ dev_err(cs->dev, "error %d when resubmitting urb.\n",
+ -r);
+ }
+}
+
+
+/* This callback routine is called when data was transmitted to the device. */
+static void gigaset_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct cardstate *cs = (struct cardstate *) urb->context;
+
+ IFNULLRET(cs);
+#ifdef CONFIG_GIGASET_DEBUG
+ if (!atomic_read(&cs->connected)) {
+ err("%s: not connected", __func__);
+ return;
+ }
+#endif
+ if (urb->status)
+ dev_err(cs->dev, "bulk transfer failed (status %d)\n",
+ -urb->status);
+ /* That's all we can do. Communication problems
+ are handled by timeouts or network protocols. */
+
+ atomic_set(&cs->hw.usb->busy, 0);
+ tasklet_schedule(&cs->write_tasklet);
+}
+
+static int send_cb(struct cardstate *cs, struct cmdbuf_t *cb)
+{
+ struct cmdbuf_t *tcb;
+ unsigned long flags;
+ int count;
+ int status = -ENOENT; // FIXME
+ struct usb_cardstate *ucs = cs->hw.usb;
+
+ do {
+ if (!cb->len) {
+ tcb = cb;
+
+ spin_lock_irqsave(&cs->cmdlock, flags);
+ cs->cmdbytes -= cs->curlen;
+ gig_dbg(DEBUG_OUTPUT, "send_cb: sent %u bytes, %u left",
+ cs->curlen, cs->cmdbytes);
+ cs->cmdbuf = cb = cb->next;
+ if (cb) {
+ cb->prev = NULL;
+ cs->curlen = cb->len;
+ } else {
+ cs->lastcmdbuf = NULL;
+ cs->curlen = 0;
+ }
+ spin_unlock_irqrestore(&cs->cmdlock, flags);
+
+ if (tcb->wake_tasklet)
+ tasklet_schedule(tcb->wake_tasklet);
+ kfree(tcb);
+ }
+ if (cb) {
+ count = min(cb->len, ucs->bulk_out_size);
+ usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
+ usb_sndbulkpipe(ucs->udev,
+ ucs->bulk_out_endpointAddr & 0x0f),
+ cb->buf + cb->offset, count,
+ gigaset_write_bulk_callback, cs);
+
+ cb->offset += count;
+ cb->len -= count;
+ atomic_set(&ucs->busy, 1);
+ gig_dbg(DEBUG_OUTPUT, "send_cb: send %d bytes", count);
+
+ status = usb_submit_urb(ucs->bulk_out_urb, SLAB_ATOMIC);
+ if (status) {
+ atomic_set(&ucs->busy, 0);
+ dev_err(cs->dev,
+ "could not submit urb (error %d)\n",
+ -status);
+ cb->len = 0; /* skip urb => remove cb+wakeup
+ in next loop cycle */
+ }
+ }
+ } while (cb && status); /* next command on error */
+
+ return status;
+}
+
+/* Send command to device. */
+static int gigaset_write_cmd(struct cardstate *cs, const unsigned char *buf,
+ int len, struct tasklet_struct *wake_tasklet)
+{
+ struct cmdbuf_t *cb;
+ unsigned long flags;
+
+ gigaset_dbg_buffer(atomic_read(&cs->mstate) != MS_LOCKED ?
+ DEBUG_TRANSCMD : DEBUG_LOCKCMD,
+ "CMD Transmit", len, buf, 0);
+
+ if (!atomic_read(&cs->connected)) {
+ err("%s: not connected", __func__);
+ return -ENODEV;
+ }
+
+ if (len <= 0)
+ return 0;
+
+ if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
+ dev_err(cs->dev, "%s: out of memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ memcpy(cb->buf, buf, len);
+ cb->len = len;
+ cb->offset = 0;
+ cb->next = NULL;
+ cb->wake_tasklet = wake_tasklet;
+
+ spin_lock_irqsave(&cs->cmdlock, flags);
+ cb->prev = cs->lastcmdbuf;
+ if (cs->lastcmdbuf)
+ cs->lastcmdbuf->next = cb;
+ else {
+ cs->cmdbuf = cb;
+ cs->curlen = len;
+ }
+ cs->cmdbytes += len;
+ cs->lastcmdbuf = cb;
+ spin_unlock_irqrestore(&cs->cmdlock, flags);
+
+ tasklet_schedule(&cs->write_tasklet);
+ return len;
+}
+
+static int gigaset_write_room(struct cardstate *cs)
+{
+ unsigned long flags;
+ unsigned bytes;
+
+ spin_lock_irqsave(&cs->cmdlock, flags);
+ bytes = cs->cmdbytes;
+ spin_unlock_irqrestore(&cs->cmdlock, flags);
+
+ return bytes < IF_WRITEBUF ? IF_WRITEBUF - bytes : 0;
+}
+
+static int gigaset_chars_in_buffer(struct cardstate *cs)
+{
+ return cs->cmdbytes;
+}
+
+static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
+{
+#ifdef CONFIG_GIGASET_UNDOCREQ
+ struct usb_device *udev = cs->hw.usb->udev;
+
+ gigaset_dbg_buffer(DEBUG_USBREQ, "brkchars", 6, buf, 0);
+ memcpy(cs->hw.usb->bchars, buf, 6);
+ return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
+ 0, 0, &buf, 6, 2000);
+#else
+ return -EINVAL;
+#endif
+}
+
+static int gigaset_freebcshw(struct bc_state *bcs)
+{
+ if (!bcs->hw.usb)
+ return 0;
+ //FIXME
+ kfree(bcs->hw.usb);
+ return 1;
+}
+
+/* Initialize the b-channel structure */
+static int gigaset_initbcshw(struct bc_state *bcs)
+{
+ bcs->hw.usb = kmalloc(sizeof(struct usb_bc_state), GFP_KERNEL);
+ if (!bcs->hw.usb)
+ return 0;
+
+ return 1;
+}
+
+static void gigaset_reinitbcshw(struct bc_state *bcs)
+{
+}
+
+static void gigaset_freecshw(struct cardstate *cs)
+{
+ tasklet_kill(&cs->write_tasklet);
+ kfree(cs->hw.usb);
+}
+
+static int gigaset_initcshw(struct cardstate *cs)
+{
+ struct usb_cardstate *ucs;
+
+ cs->hw.usb = ucs =
+ kmalloc(sizeof(struct usb_cardstate), GFP_KERNEL);
+ if (!ucs)
+ return 0;
+
+ ucs->bchars[0] = 0;
+ ucs->bchars[1] = 0;
+ ucs->bchars[2] = 0;
+ ucs->bchars[3] = 0;
+ ucs->bchars[4] = 0x11;
+ ucs->bchars[5] = 0x13;
+ ucs->bulk_out_buffer = NULL;
+ ucs->bulk_out_urb = NULL;
+ //ucs->urb_cmd_out = NULL;
+ ucs->read_urb = NULL;
+ tasklet_init(&cs->write_tasklet,
+ &gigaset_modem_fill, (unsigned long) cs);
+
+ return 1;
+}
+
+/* Send data from current skb to the device. */
+static int write_modem(struct cardstate *cs)
+{
+ int ret;
+ int count;
+ struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
+ struct usb_cardstate *ucs = cs->hw.usb;
+
+ IFNULLRETVAL(bcs->tx_skb, -EINVAL);
+
+ gig_dbg(DEBUG_WRITE, "len: %d...", bcs->tx_skb->len);
+
+ ret = -ENODEV;
+ IFNULLGOTO(ucs->bulk_out_buffer, error);
+ IFNULLGOTO(ucs->bulk_out_urb, error);
+ ret = 0;
+
+ if (!bcs->tx_skb->len) {
+ dev_kfree_skb_any(bcs->tx_skb);
+ bcs->tx_skb = NULL;
+ return -EINVAL;
+ }
+
+ /* Copy data to bulk out buffer and // FIXME copying not necessary
+ * transmit data
+ */
+ count = min(bcs->tx_skb->len, (unsigned) ucs->bulk_out_size);
+ memcpy(ucs->bulk_out_buffer, bcs->tx_skb->data, count);
+ skb_pull(bcs->tx_skb, count);
+
+ usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
+ usb_sndbulkpipe(ucs->udev,
+ ucs->bulk_out_endpointAddr & 0x0f),
+ ucs->bulk_out_buffer, count,
+ gigaset_write_bulk_callback, cs);
+ atomic_set(&ucs->busy, 1);
+ gig_dbg(DEBUG_OUTPUT, "write_modem: send %d bytes", count);
+
+ ret = usb_submit_urb(ucs->bulk_out_urb, SLAB_ATOMIC);
+ if (ret) {
+ dev_err(cs->dev, "could not submit urb (error %d)\n", -ret);
+ atomic_set(&ucs->busy, 0);
+ }
+ if (!bcs->tx_skb->len) {
+ /* skb sent completely */
+ gigaset_skb_sent(bcs, bcs->tx_skb); //FIXME also, when ret<0?
+
+ gig_dbg(DEBUG_INTR, "kfree skb (Adr: %lx)!",
+ (unsigned long) bcs->tx_skb);
+ dev_kfree_skb_any(bcs->tx_skb);
+ bcs->tx_skb = NULL;
+ }
+
+ return ret;
+error:
+ dev_kfree_skb_any(bcs->tx_skb);
+ bcs->tx_skb = NULL;
+ return ret;
+
+}
+
+static int gigaset_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ int retval;
+ struct usb_device *udev = interface_to_usbdev(interface);
+ unsigned int ifnum;
+ struct usb_host_interface *hostif;
+ struct cardstate *cs = NULL;
+ struct usb_cardstate *ucs = NULL;
+ struct usb_endpoint_descriptor *endpoint;
+ int buffer_size;
+ int alt;
+
+ gig_dbg(DEBUG_ANY,
+ "%s: Check if device matches .. (Vendor: 0x%x, Product: 0x%x)",
+ __func__, le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ retval = -ENODEV; //FIXME
+
+ /* See if the device offered us matches what we can accept */
+ if ((le16_to_cpu(udev->descriptor.idVendor != USB_M105_VENDOR_ID)) ||
+ (le16_to_cpu(udev->descriptor.idProduct != USB_M105_PRODUCT_ID)))
+ return -ENODEV;
+
+ /* this starts to become ascii art... */
+ hostif = interface->cur_altsetting;
+ alt = hostif->desc.bAlternateSetting;
+ ifnum = hostif->desc.bInterfaceNumber; // FIXME ?
+
+ if (alt != 0 || ifnum != 0) {
+ dev_warn(&udev->dev, "ifnum %d, alt %d\n", ifnum, alt);
+ return -ENODEV;
+ }
+
+ /* Reject application specific intefaces
+ *
+ */
+ if (hostif->desc.bInterfaceClass != 255) {
+ dev_info(&udev->dev,
+ "%s: Device matched but iface_desc[%d]->bInterfaceClass==%d!\n",
+ __func__, ifnum, hostif->desc.bInterfaceClass);
+ return -ENODEV;
+ }
+
+ dev_info(&udev->dev, "%s: Device matched ... !\n", __func__);
+
+ cs = gigaset_getunassignedcs(driver);
+ if (!cs) {
+ dev_warn(&udev->dev, "no free cardstate\n");
+ return -ENODEV;
+ }
+ ucs = cs->hw.usb;
+
+ /* save off device structure ptrs for later use */
+ usb_get_dev(udev);
+ ucs->udev = udev;
+ ucs->interface = interface;
+ cs->dev = &udev->dev;
+
+ endpoint = &hostif->endpoint[0].desc;
+
+ buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+ ucs->bulk_out_size = buffer_size;
+ ucs->bulk_out_endpointAddr = endpoint->bEndpointAddress;
+ ucs->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
+ if (!ucs->bulk_out_buffer) {
+ dev_err(cs->dev, "Couldn't allocate bulk_out_buffer\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ ucs->bulk_out_urb = usb_alloc_urb(0, SLAB_KERNEL);
+ if (!ucs->bulk_out_urb) {
+ dev_err(cs->dev, "Couldn't allocate bulk_out_urb\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ endpoint = &hostif->endpoint[1].desc;
+
+ atomic_set(&ucs->busy, 0);
+
+ ucs->read_urb = usb_alloc_urb(0, SLAB_KERNEL);
+ if (!ucs->read_urb) {
+ dev_err(cs->dev, "No free urbs available\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+ ucs->rcvbuf_size = buffer_size;
+ ucs->int_in_endpointAddr = endpoint->bEndpointAddress;
+ cs->inbuf[0].rcvbuf = kmalloc(buffer_size, GFP_KERNEL);
+ if (!cs->inbuf[0].rcvbuf) {
+ dev_err(cs->dev, "Couldn't allocate rcvbuf\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ /* Fill the interrupt urb and send it to the core */
+ usb_fill_int_urb(ucs->read_urb, udev,
+ usb_rcvintpipe(udev,
+ endpoint->bEndpointAddress & 0x0f),
+ cs->inbuf[0].rcvbuf, buffer_size,
+ gigaset_read_int_callback,
+ cs->inbuf + 0, endpoint->bInterval);
+
+ retval = usb_submit_urb(ucs->read_urb, SLAB_KERNEL);
+ if (retval) {
+ dev_err(cs->dev, "Could not submit URB (error %d)\n", -retval);
+ goto error;
+ }
+
+ /* tell common part that the device is ready */
+ if (startmode == SM_LOCKED)
+ atomic_set(&cs->mstate, MS_LOCKED);
+ if (!gigaset_start(cs)) {
+ tasklet_kill(&cs->write_tasklet);
+ retval = -ENODEV; //FIXME
+ goto error;
+ }
+
+ /* save address of controller structure */
+ usb_set_intfdata(interface, cs);
+ return 0;
+
+error:
+ if (ucs->read_urb)
+ usb_kill_urb(ucs->read_urb);
+ kfree(ucs->bulk_out_buffer);
+ if (ucs->bulk_out_urb != NULL)
+ usb_free_urb(ucs->bulk_out_urb);
+ kfree(cs->inbuf[0].rcvbuf);
+ if (ucs->read_urb != NULL)
+ usb_free_urb(ucs->read_urb);
+ ucs->read_urb = ucs->bulk_out_urb = NULL;
+ cs->inbuf[0].rcvbuf = ucs->bulk_out_buffer = NULL;
+ usb_put_dev(ucs->udev);
+ ucs->udev = NULL;
+ ucs->interface = NULL;
+ gigaset_unassign(cs);
+ return retval;
+}
+
+/**
+ * skel_disconnect
+ */
+static void gigaset_disconnect(struct usb_interface *interface)
+{
+ struct cardstate *cs;
+ struct usb_cardstate *ucs;
+
+ cs = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ ucs = cs->hw.usb;
+ usb_kill_urb(ucs->read_urb);
+
+ gigaset_stop(cs);
+
+ tasklet_kill(&cs->write_tasklet);
+
+ usb_kill_urb(ucs->bulk_out_urb); /* FIXME: only if active? */
+
+ kfree(ucs->bulk_out_buffer);
+ if (ucs->bulk_out_urb != NULL)
+ usb_free_urb(ucs->bulk_out_urb);
+ kfree(cs->inbuf[0].rcvbuf);
+ if (ucs->read_urb != NULL)
+ usb_free_urb(ucs->read_urb);
+ ucs->read_urb = ucs->bulk_out_urb = NULL;
+ cs->inbuf[0].rcvbuf = ucs->bulk_out_buffer = NULL;
+
+ usb_put_dev(ucs->udev);
+ ucs->interface = NULL;
+ ucs->udev = NULL;
+ cs->dev = NULL;
+ gigaset_unassign(cs);
+}
+
+static struct gigaset_ops ops = {
+ gigaset_write_cmd,
+ gigaset_write_room,
+ gigaset_chars_in_buffer,
+ gigaset_brkchars,
+ gigaset_init_bchannel,
+ gigaset_close_bchannel,
+ gigaset_initbcshw,
+ gigaset_freebcshw,
+ gigaset_reinitbcshw,
+ gigaset_initcshw,
+ gigaset_freecshw,
+ gigaset_set_modem_ctrl,
+ gigaset_baud_rate,
+ gigaset_set_line_ctrl,
+ gigaset_m10x_send_skb,
+ gigaset_m10x_input,
+};
+
+/**
+ * usb_gigaset_init
+ * This function is called while kernel-module is loaded
+ */
+static int __init usb_gigaset_init(void)
+{
+ int result;
+
+ /* allocate memory for our driver state and intialize it */
+ if ((driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
+ GIGASET_MODULENAME, GIGASET_DEVNAME,
+ GIGASET_DEVFSNAME, &ops,
+ THIS_MODULE)) == NULL)
+ goto error;
+
+ /* allocate memory for our device state and intialize it */
+ cardstate = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
+ if (!cardstate)
+ goto error;
+
+ /* register this driver with the USB subsystem */
+ result = usb_register(&gigaset_usb_driver);
+ if (result < 0) {
+ err("usb_gigaset: usb_register failed (error %d)",
+ -result);
+ goto error;
+ }
+
+ info(DRIVER_AUTHOR);
+ info(DRIVER_DESC);
+ return 0;
+
+error: if (cardstate)
+ gigaset_freecs(cardstate);
+ cardstate = NULL;
+ if (driver)
+ gigaset_freedriver(driver);
+ driver = NULL;
+ return -1;
+}
+
+
+/**
+ * usb_gigaset_exit
+ * This function is called while unloading the kernel-module
+ */
+static void __exit usb_gigaset_exit(void)
+{
+ gigaset_blockdriver(driver); /* => probe will fail
+ * => no gigaset_start any more
+ */
+
+ gigaset_shutdown(cardstate);
+ /* from now on, no isdn callback should be possible */
+
+ /* deregister this driver with the USB subsystem */
+ usb_deregister(&gigaset_usb_driver);
+ /* this will call the disconnect-callback */
+ /* from now on, no disconnect/probe callback should be running */
+
+ gigaset_freecs(cardstate);
+ cardstate = NULL;
+ gigaset_freedriver(driver);
+ driver = NULL;
+}
+
+
+module_init(usb_gigaset_init);
+module_exit(usb_gigaset_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+
+MODULE_LICENSE("GPL");
--- linux-2.6.16-rc4.orig/drivers/isdn/gigaset/asyncdata.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.16-rc4-mm2/drivers/isdn/gigaset/asyncdata.c 2006-02-24 00:19:28.000000000 +0100
@@ -0,0 +1,600 @@
+/*
+ * Common data handling layer for ser_gigaset and usb_gigaset
+ *
+ * Copyright (c) 2005 by Tilman Schmidt <[email protected]>,
+ * Hansjoerg Lipp <[email protected]>,
+ * Stefan Eilers <[email protected]>.
+ *
+ * =====================================================================
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ * =====================================================================
+ */
+
+#include "gigaset.h"
+#include <linux/crc-ccitt.h>
+
+//#define GIG_M10x_STUFF_VOICE_DATA
+
+/* check if byte must be stuffed/escaped
+ * I'm not sure which data should be encoded.
+ * Therefore I will go the hard way and decode every value
+ * less than 0x20, the flag sequence and the control escape char.
+ */
+static inline int muststuff(unsigned char c)
+{
+ if (c < PPP_TRANS) return 1;
+ if (c == PPP_FLAG) return 1;
+ if (c == PPP_ESCAPE) return 1;
+ /* other possible candidates: */
+ /* 0x91: XON with parity set */
+ /* 0x93: XOFF with parity set */
+ return 0;
+}
+
+/* == data input =========================================================== */
+
+/* process a block of received bytes in command mode (modem response)
+ * Return value:
+ * number of processed bytes
+ */
+static inline int cmd_loop(unsigned char c, unsigned char *src, int numbytes,
+ struct inbuf_t *inbuf)
+{
+ struct cardstate *cs = inbuf->cs;
+ unsigned cbytes = cs->cbytes;
+ int inputstate = inbuf->inputstate;
+ int startbytes = numbytes;
+
+ for (;;) {
+ cs->respdata[cbytes] = c;
+ if (c == 10 || c == 13) {
+ gig_dbg(DEBUG_TRANSCMD, "%s: End of Command (%d Bytes)",
+ __func__, cbytes);
+ cs->cbytes = cbytes;
+ gigaset_handle_modem_response(cs); /* can change
+ cs->dle */
+ cbytes = 0;
+
+ if (cs->dle &&
+ !(inputstate & INS_DLE_command)) {
+ inputstate &= ~INS_command;
+ break;
+ }
+ } else {
+ /* advance in line buffer, checking for overflow */
+ if (cbytes < MAX_RESP_SIZE - 1)
+ cbytes++;
+ else
+ dev_warn(cs->dev, "response too large\n");
+ }
+
+ if (!numbytes)
+ break;
+ c = *src++;
+ --numbytes;
+ if (c == DLE_FLAG &&
+ (cs->dle || inputstate & INS_DLE_command)) {
+ inputstate |= INS_DLE_char;
+ break;
+ }
+ }
+
+ cs->cbytes = cbytes;
+ inbuf->inputstate = inputstate;
+
+ return startbytes - numbytes;
+}
+
+/* process a block of received bytes in lock mode (tty i/f)
+ * Return value:
+ * number of processed bytes
+ */
+static inline int lock_loop(unsigned char *src, int numbytes,
+ struct inbuf_t *inbuf)
+{
+ struct cardstate *cs = inbuf->cs;
+
+ gigaset_dbg_buffer(DEBUG_LOCKCMD, "received response",
+ numbytes, src, 0);
+ gigaset_if_receive(cs, src, numbytes);
+
+ return numbytes;
+}
+
+/* process a block of received bytes in HDLC data mode
+ * Collect HDLC frames, undoing byte stuffing and watching for DLE escapes.
+ * When a frame is complete, check the FCS and pass valid frames to the LL.
+ * If DLE is encountered, return immediately to let the caller handle it.
+ * Return value:
+ * number of processed bytes
+ * numbytes (all bytes processed) on error --FIXME
+ */
+static inline int hdlc_loop(unsigned char c, unsigned char *src, int numbytes,
+ struct inbuf_t *inbuf)
+{
+ struct cardstate *cs = inbuf->cs;
+ struct bc_state *bcs = inbuf->bcs;
+ int inputstate;
+ __u16 fcs;
+ struct sk_buff *skb;
+ unsigned char error;
+ struct sk_buff *compskb;
+ int startbytes = numbytes;
+ int l;
+
+ IFNULLRETVAL(bcs, numbytes);
+ inputstate = bcs->inputstate;
+ fcs = bcs->fcs;
+ skb = bcs->skb;
+ IFNULLRETVAL(skb, numbytes);
+
+ if (unlikely(inputstate & INS_byte_stuff)) {
+ inputstate &= ~INS_byte_stuff;
+ goto byte_stuff;
+ }
+ for (;;) {
+ if (unlikely(c == PPP_ESCAPE)) {
+ if (unlikely(!numbytes)) {
+ inputstate |= INS_byte_stuff;
+ break;
+ }
+ c = *src++;
+ --numbytes;
+ if (unlikely(c == DLE_FLAG &&
+ (cs->dle ||
+ inbuf->inputstate & INS_DLE_command))) {
+ inbuf->inputstate |= INS_DLE_char;
+ inputstate |= INS_byte_stuff;
+ break;
+ }
+byte_stuff:
+ c ^= PPP_TRANS;
+#ifdef CONFIG_GIGASET_DEBUG
+ if (unlikely(!muststuff(c)))
+ gig_dbg(DEBUG_HDLC, "byte stuffed: 0x%02x", c);
+#endif
+ } else if (unlikely(c == PPP_FLAG)) {
+ if (unlikely(inputstate & INS_skip_frame)) {
+ if (!(inputstate & INS_have_data)) { /* 7E 7E */
+#ifdef CONFIG_GIGASET_DEBUG
+ ++bcs->emptycount;
+#endif
+ } else
+ gig_dbg(DEBUG_HDLC,
+ "7e----------------------------");
+
+ /* end of frame */
+ error = 1;
+ gigaset_rcv_error(NULL, cs, bcs);
+ } else if (!(inputstate & INS_have_data)) { /* 7E 7E */
+#ifdef CONFIG_GIGASET_DEBUG
+ ++bcs->emptycount;
+#endif
+ break;
+ } else {
+ gig_dbg(DEBUG_HDLC,
+ "7e----------------------------");
+
+ /* end of frame */
+ error = 0;
+
+ if (unlikely(fcs != PPP_GOODFCS)) {
+ dev_err(cs->dev,
+ "Packet checksum at %lu failed, "
+ "packet is corrupted (%u bytes)!\n",
+ bcs->rcvbytes, skb->len);
+ compskb = NULL;
+ gigaset_rcv_error(compskb, cs, bcs);
+ error = 1;
+ } else {
+ if (likely((l = skb->len) > 2)) {
+ skb->tail -= 2;
+ skb->len -= 2;
+ } else {
+ dev_kfree_skb(skb);
+ skb = NULL;
+ inputstate |= INS_skip_frame;
+ if (l == 1) {
+ dev_err(cs->dev,
+ "invalid packet size (1)!\n");
+ error = 1;
+ gigaset_rcv_error(NULL,
+ cs, bcs);
+ }
+ }
+ if (likely(!(error ||
+ (inputstate &
+ INS_skip_frame)))) {
+ gigaset_rcv_skb(skb, cs, bcs);
+ }
+ }
+ }
+
+ if (unlikely(error))
+ if (skb)
+ dev_kfree_skb(skb);
+
+ fcs = PPP_INITFCS;
+ inputstate &= ~(INS_have_data | INS_skip_frame);
+ if (unlikely(bcs->ignore)) {
+ inputstate |= INS_skip_frame;
+ skb = NULL;
+ } else if (likely((skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)) {
+ skb_reserve(skb, HW_HDR_LEN);
+ } else {
+ dev_warn(cs->dev,
+ "could not allocate new skb\n");
+ inputstate |= INS_skip_frame;
+ }
+
+ break;
+#ifdef CONFIG_GIGASET_DEBUG
+ } else if (unlikely(muststuff(c))) {
+ /* Should not happen. Possible after ZDLE=1<CR><LF>. */
+ gig_dbg(DEBUG_HDLC, "not byte stuffed: 0x%02x", c);
+#endif
+ }
+
+ /* add character */
+
+#ifdef CONFIG_GIGASET_DEBUG
+ if (unlikely(!(inputstate & INS_have_data))) {
+ gig_dbg(DEBUG_HDLC, "7e (%d x) ================",
+ bcs->emptycount);
+ bcs->emptycount = 0;
+ }
+#endif
+
+ inputstate |= INS_have_data;
+
+ if (likely(!(inputstate & INS_skip_frame))) {
+ if (unlikely(skb->len == SBUFSIZE)) {
+ dev_warn(cs->dev, "received packet too long\n");
+ dev_kfree_skb_any(skb);
+ skb = NULL;
+ inputstate |= INS_skip_frame;
+ break;
+ }
+ *gigaset_skb_put_quick(skb, 1) = c;
+ /* *__skb_put (skb, 1) = c; */
+ fcs = crc_ccitt_byte(fcs, c);
+ }
+
+ if (unlikely(!numbytes))
+ break;
+ c = *src++;
+ --numbytes;
+ if (unlikely(c == DLE_FLAG &&
+ (cs->dle ||
+ inbuf->inputstate & INS_DLE_command))) {
+ inbuf->inputstate |= INS_DLE_char;
+ break;
+ }
+ }
+ bcs->inputstate = inputstate;
+ bcs->fcs = fcs;
+ bcs->skb = skb;
+ return startbytes - numbytes;
+}
+
+/* process a block of received bytes in transparent data mode
+ * Invert bytes, undoing byte stuffing and watching for DLE escapes.
+ * If DLE is encountered, return immediately to let the caller handle it.
+ * Return value:
+ * number of processed bytes
+ * numbytes (all bytes processed) on error --FIXME
+ */
+static inline int iraw_loop(unsigned char c, unsigned char *src, int numbytes,
+ struct inbuf_t *inbuf)
+{
+ struct cardstate *cs = inbuf->cs;
+ struct bc_state *bcs = inbuf->bcs;
+ int inputstate;
+ struct sk_buff *skb;
+ int startbytes = numbytes;
+
+ IFNULLRETVAL(bcs, numbytes);
+ inputstate = bcs->inputstate;
+ skb = bcs->skb;
+ IFNULLRETVAL(skb, numbytes);
+
+ for (;;) {
+ /* add character */
+ inputstate |= INS_have_data;
+
+ if (likely(!(inputstate & INS_skip_frame))) {
+ if (unlikely(skb->len == SBUFSIZE)) {
+ //FIXME just pass skb up and allocate a new one
+ dev_warn(cs->dev, "received packet too long\n");
+ dev_kfree_skb_any(skb);
+ skb = NULL;
+ inputstate |= INS_skip_frame;
+ break;
+ }
+ *gigaset_skb_put_quick(skb, 1) = gigaset_invtab[c];
+ }
+
+ if (unlikely(!numbytes))
+ break;
+ c = *src++;
+ --numbytes;
+ if (unlikely(c == DLE_FLAG &&
+ (cs->dle ||
+ inbuf->inputstate & INS_DLE_command))) {
+ inbuf->inputstate |= INS_DLE_char;
+ break;
+ }
+ }
+
+ /* pass data up */
+ if (likely(inputstate & INS_have_data)) {
+ if (likely(!(inputstate & INS_skip_frame))) {
+ gigaset_rcv_skb(skb, cs, bcs);
+ }
+ inputstate &= ~(INS_have_data | INS_skip_frame);
+ if (unlikely(bcs->ignore)) {
+ inputstate |= INS_skip_frame;
+ skb = NULL;
+ } else if (likely((skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN))
+ != NULL)) {
+ skb_reserve(skb, HW_HDR_LEN);
+ } else {
+ dev_warn(cs->dev, "could not allocate new skb\n");
+ inputstate |= INS_skip_frame;
+ }
+ }
+
+ bcs->inputstate = inputstate;
+ bcs->skb = skb;
+ return startbytes - numbytes;
+}
+
+/* process a block of data received from the device
+ */
+void gigaset_m10x_input(struct inbuf_t *inbuf)
+{
+ struct cardstate *cs;
+ unsigned tail, head, numbytes;
+ unsigned char *src, c;
+ int procbytes;
+
+ head = atomic_read(&inbuf->head);
+ tail = atomic_read(&inbuf->tail);
+ gig_dbg(DEBUG_INTR, "buffer state: %u -> %u", head, tail);
+
+ if (head != tail) {
+ cs = inbuf->cs;
+ src = inbuf->data + head;
+ numbytes = (head > tail ? RBUFSIZE : tail) - head;
+ gig_dbg(DEBUG_INTR, "processing %u bytes", numbytes);
+
+ while (numbytes) {
+ if (atomic_read(&cs->mstate) == MS_LOCKED) {
+ procbytes = lock_loop(src, numbytes, inbuf);
+ src += procbytes;
+ numbytes -= procbytes;
+ } else {
+ c = *src++;
+ --numbytes;
+ if (c == DLE_FLAG && (cs->dle ||
+ inbuf->inputstate & INS_DLE_command)) {
+ if (!(inbuf->inputstate & INS_DLE_char)) {
+ inbuf->inputstate |= INS_DLE_char;
+ goto nextbyte;
+ }
+ /* <DLE> <DLE> => <DLE> in data stream */
+ inbuf->inputstate &= ~INS_DLE_char;
+ }
+
+ if (!(inbuf->inputstate & INS_DLE_char)) {
+
+ /* FIXME use function pointers? */
+ if (inbuf->inputstate & INS_command)
+ procbytes = cmd_loop(c, src, numbytes, inbuf);
+ else if (inbuf->bcs->proto2 == ISDN_PROTO_L2_HDLC)
+ procbytes = hdlc_loop(c, src, numbytes, inbuf);
+ else
+ procbytes = iraw_loop(c, src, numbytes, inbuf);
+
+ src += procbytes;
+ numbytes -= procbytes;
+ } else { /* DLE char */
+ inbuf->inputstate &= ~INS_DLE_char;
+ switch (c) {
+ case 'X': /*begin of command*/
+#ifdef CONFIG_GIGASET_DEBUG
+ if (inbuf->inputstate & INS_command)
+ dev_err(cs->dev,
+ "received <DLE> 'X' in command mode\n");
+#endif
+ inbuf->inputstate |=
+ INS_command | INS_DLE_command;
+ break;
+ case '.': /*end of command*/
+#ifdef CONFIG_GIGASET_DEBUG
+ if (!(inbuf->inputstate & INS_command))
+ dev_err(cs->dev,
+ "received <DLE> '.' in hdlc mode\n");
+#endif
+ inbuf->inputstate &= cs->dle ?
+ ~(INS_DLE_command|INS_command)
+ : ~INS_DLE_command;
+ break;
+ //case DLE_FLAG: /*DLE_FLAG in data stream*/ /* schon oben behandelt! */
+ default:
+ dev_err(cs->dev,
+ "received 0x10 0x%02x!\n",
+ (int) c);
+ /* FIXME: reset driver?? */
+ }
+ }
+ }
+nextbyte:
+ if (!numbytes) {
+ /* end of buffer, check for wrap */
+ if (head > tail) {
+ head = 0;
+ src = inbuf->data;
+ numbytes = tail;
+ } else {
+ head = tail;
+ break;
+ }
+ }
+ }
+
+ gig_dbg(DEBUG_INTR, "setting head to %u", head);
+ atomic_set(&inbuf->head, head);
+ }
+}
+
+
+/* == data output ========================================================== */
+
+/* Encoding of a PPP packet into an octet stuffed HDLC frame
+ * with FCS, opening and closing flags.
+ * parameters:
+ * skb skb containing original packet (freed upon return)
+ * head number of headroom bytes to allocate in result skb
+ * tail number of tailroom bytes to allocate in result skb
+ * Return value:
+ * pointer to newly allocated skb containing the result frame
+ */
+static struct sk_buff *HDLC_Encode(struct sk_buff *skb, int head, int tail)
+{
+ struct sk_buff *hdlc_skb;
+ __u16 fcs;
+ unsigned char c;
+ unsigned char *cp;
+ int len;
+ unsigned int stuf_cnt;
+
+ stuf_cnt = 0;
+ fcs = PPP_INITFCS;
+ cp = skb->data;
+ len = skb->len;
+ while (len--) {
+ if (muststuff(*cp))
+ stuf_cnt++;
+ fcs = crc_ccitt_byte(fcs, *cp++);
+ }
+ fcs ^= 0xffff; /* complement */
+
+ /* size of new buffer: original size + number of stuffing bytes
+ * + 2 bytes FCS + 2 stuffing bytes for FCS (if needed) + 2 flag bytes
+ */
+ hdlc_skb = dev_alloc_skb(skb->len + stuf_cnt + 6 + tail + head);
+ if (!hdlc_skb) {
+ dev_kfree_skb(skb);
+ return NULL;
+ }
+ skb_reserve(hdlc_skb, head);
+
+ /* Copy acknowledge request into new skb */
+ memcpy(hdlc_skb->head, skb->head, 2);
+
+ /* Add flag sequence in front of everything.. */
+ *(skb_put(hdlc_skb, 1)) = PPP_FLAG;
+
+ /* Perform byte stuffing while copying data. */
+ while (skb->len--) {
+ if (muststuff(*skb->data)) {
+ *(skb_put(hdlc_skb, 1)) = PPP_ESCAPE;
+ *(skb_put(hdlc_skb, 1)) = (*skb->data++) ^ PPP_TRANS;
+ } else
+ *(skb_put(hdlc_skb, 1)) = *skb->data++;
+ }
+
+ /* Finally add FCS (byte stuffed) and flag sequence */
+ c = (fcs & 0x00ff); /* least significant byte first */
+ if (muststuff(c)) {
+ *(skb_put(hdlc_skb, 1)) = PPP_ESCAPE;
+ c ^= PPP_TRANS;
+ }
+ *(skb_put(hdlc_skb, 1)) = c;
+
+ c = ((fcs >> 8) & 0x00ff);
+ if (muststuff(c)) {
+ *(skb_put(hdlc_skb, 1)) = PPP_ESCAPE;
+ c ^= PPP_TRANS;
+ }
+ *(skb_put(hdlc_skb, 1)) = c;
+
+ *(skb_put(hdlc_skb, 1)) = PPP_FLAG;
+
+ dev_kfree_skb(skb);
+ return hdlc_skb;
+}
+
+/* Encoding of a raw packet into an octet stuffed bit inverted frame
+ * parameters:
+ * skb skb containing original packet (freed upon return)
+ * head number of headroom bytes to allocate in result skb
+ * tail number of tailroom bytes to allocate in result skb
+ * Return value:
+ * pointer to newly allocated skb containing the result frame
+ */
+static struct sk_buff *iraw_encode(struct sk_buff *skb, int head, int tail)
+{
+ struct sk_buff *iraw_skb;
+ unsigned char c;
+ unsigned char *cp;
+ int len;
+
+ /* worst case: every byte must be stuffed */
+ iraw_skb = dev_alloc_skb(2*skb->len + tail + head);
+ if (!iraw_skb) {
+ dev_kfree_skb(skb);
+ return NULL;
+ }
+ skb_reserve(iraw_skb, head);
+
+ cp = skb->data;
+ len = skb->len;
+ while (len--) {
+ c = gigaset_invtab[*cp++];
+ if (c == DLE_FLAG)
+ *(skb_put(iraw_skb, 1)) = c;
+ *(skb_put(iraw_skb, 1)) = c;
+ }
+ dev_kfree_skb(skb);
+ return iraw_skb;
+}
+
+/* gigaset_send_skb
+ * called by common.c to queue an skb for sending
+ * and start transmission if necessary
+ * parameters:
+ * B Channel control structure
+ * skb
+ * Return value:
+ * number of bytes accepted for sending
+ * (skb->len if ok, 0 if out of buffer space)
+ * or error code (< 0, eg. -EINVAL)
+ */
+int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb)
+{
+ unsigned len;
+
+ IFNULLRETVAL(bcs, -EFAULT);
+ IFNULLRETVAL(skb, -EFAULT);
+ len = skb->len;
+
+ if (bcs->proto2 == ISDN_PROTO_L2_HDLC)
+ skb = HDLC_Encode(skb, HW_HDR_LEN, 0);
+ else
+ skb = iraw_encode(skb, HW_HDR_LEN, 0);
+ if (!skb) {
+ dev_err(bcs->cs->dev,
+ "unable to allocate memory for encoding!\n");
+ return -ENOMEM;
+ }
+
+ skb_queue_tail(&bcs->squeue, skb);
+ tasklet_schedule(&bcs->cs->write_tasklet);
+
+ return len; /* ok so far */
+}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
