On 23 Feb 2006, at 00:24, Alan Cox wrote:
On Mer, 2006-02-22 at 23:53 +0000, Chris Boot wrote:
Hi all,
I upgraded from 2.6.16-rc2-ide2 to 2.6.16-rc4-ide1 and suffered the
panic pasted below. Needless to say this all worked fine with the
previous kernel (and some). I have two Seagate 250GB drives connected
to the controller (a PCI Adaptec 1205SA). I'm testing -ide so I don't
have the whole IDE layer just for my rarely used DVD-RW on my VIA
PATA.
Do you see the same crash on 2.6.16-rc4 without the IDE diff ?
Nope, works fine there, except obviously the PATA doesn't! :-)
[4294672.259000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294672.265000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.271000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing disabled
[4294672.280000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.288000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.295000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.302000] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.308000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18
(level, low) -> IRQ 169
[4294672.317000] ata1: SATA max UDMA/100 cmd 0xF8802080 ctl
0xF880208A bmdma 0xF8802000 irq 169
[4294672.327000] ata2: SATA max UDMA/100 cmd 0xF88020C0 ctl
0xF88020CA bmdma 0xF8802008 irq 169
[4294672.538000] ata1: SATA link up 1.5 Gbps (SStatus 113)
[4294672.698000] ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors:
LBA48
[4294672.705000] ata1: dev 0 configured for UDMA/100
[4294672.711000] scsi0 : sata_sil
[4294672.915000] ata2: SATA link up 1.5 Gbps (SStatus 113)
[4294673.075000] ata2: dev 0 ATA-7, max UDMA/133, 488397168 sectors:
LBA48
[4294673.082000] ata2: dev 0 configured for UDMA/100
[4294673.088000] scsi1 : sata_sil
[4294673.091000] Vendor: ATA Model: ST3250823AS Rev: 3.03
[4294673.100000] Type: Direct-Access ANSI
SCSI revision: 05
[4294673.109000] Vendor: ATA Model: ST3250823AS Rev: 3.03
[4294673.118000] Type: Direct-Access ANSI
SCSI revision: 05
[4294673.127000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ
11, using IRQ 20
[4294673.135000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[4294673.142000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -
> GSI 20 (level, low) -> IRQ 177
[4294673.153000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 1
[4294673.159000] sata_via 0000:00:0f.0: routed to hard irq line 1
[4294673.201000] ata3: SATA max UDMA/133 cmd 0xB800 ctl 0xBC02 bmdma
0xC800 irq 177
[4294673.244000] ata4: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma
0xC808 irq 177
[4294673.488000] ata3: SATA link up 1.5 Gbps (SStatus 113)
[4294673.682000] ata3: dev 0 ATA-7, max UDMA/133, 488397168 sectors:
LBA48
[4294673.724000] ata3: dev 0 configured for UDMA/133
[4294673.765000] scsi2 : sata_via
[4294674.004000] ata4: SATA link up 1.5 Gbps (SStatus 113)
[4294674.198000] ata4: dev 0 ATA-7, max UDMA/133, 488397168 sectors:
LBA48
[4294674.240000] ata4: dev 0 configured for UDMA/133
[4294674.281000] scsi3 : sata_via
[4294674.319000] Vendor: ATA Model: ST3250823AS Rev: 3.03
[4294674.362000] Type: Direct-Access ANSI
SCSI revision: 05
[4294674.406000] Vendor: ATA Model: ST3250823AS Rev: 3.03
[4294674.450000] Type: Direct-Access ANSI
SCSI revision: 05
HTH,
Chris
--
Chris Boot
[email protected]
http://www.bootc.net/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
