Re: LibPATA code issues / 2.6.15.4

[Sander <sander@humilis.net>]

Mark Lord wrote (ao):
> Sander wrote:
> >Mark Lord wrote (ao):
> >>On Friday 17 February 2006 03:45, Jeff Garzik wrote:
> >>>Submit a patch... 
> >>You mean, something like this one?
> ...
> >[  633.449961] md: md1: sync done.
> >[  633.456070] RAID5 conf printout:
> >[  633.456117]  --- rd:9 wd:9 fd:0
> ...
> >[ 1872.338185] ata6: translated op=0x2a ATA stat/err 0xd0/00 to SCSI 
> >SK/ASC/ASCQ 0xb/47/00
> >[ 1872.338239] ata6: status=0xd0 { Busy }
> >[ 5749.285084] ata8: translated op=0x2a ATA stat/err 0xd0/00 to SCSI 
> >SK/ASC/ASCQ 0xb/47/00
> >[ 5749.285138] ata8: status=0xd0 { Busy }
> >[ 5906.008461] ata6: translated op=0x2a ATA stat/err 0xd0/00 to SCSI 
> >SK/ASC/ASCQ 0xb/47/00
> >[ 5906.008515] ata6: status=0xd0 { Busy }
> ...
> >This is with 2.6.16-rc3, your patch, and running nine Maxtors disks
> >over onboard nForce4 and MV88SX6081 8-port SATA II PCI-X Controller (rev 
> >09).
> >
> >for i in `seq 10`
> >do dd if=/dev/zero of=bigfile.$i bs=1024k count=10000
> >done
> >md5sum bigfile.*
> >
> >The errors mostly seem to happen during the md5sum (not during the dd).
> 
> SCSI opcode 0x2a is WRITE_10, so the errors are being reported
> in response to the writes to bigfile.$i.

Ah, my bad then.

> But these are different from the previously reported error status
> values -- I wonder why it's getting "Busy" back as a status here ??

Well, as I wrote, I am not the original reporter whoms thread you
responded to with your patch. I just thought I could use it to get
better errors messages for my bug reports.

I am using the sata_mv driver, which is beta. That might explain why it
behaves not totally as expected in your eyes. I have no clue anyway :-)

I hope my reports are of any use to Jeff wrt the sata_mv driver.

Thank you for your response.

	Sander

-- 
Humilis IT Services and Solutions
http://www.humilis.net
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/