Re: Help: DGE-560T not recognized by Linux

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Brian Hall <[email protected]> wrote:
>
> Using sk98lin this "almost" worked- brought the line up, got a
>  gigabit connection light on my switch, but trying to assign an IP to
>  the interface results in a kernel panic. Not good...

As Randy says, sky2 looks like your best bet.

>  I see that the sky2 driver in 2.6.16rc4 lists my card, but for some
>  reason it fails to access the card, maybe because I have an ULi chipset?
> 
>  Feb 17 23:18:46 syrinx sky2 0000:02:00.0: can't access PCI config space

Looks like something died way down in the PCI bus config space read/write
operations.  I don't know what would cause that.  You could perhaps play
with `pci=conf1', `pci=conf2', etc as per
Documentation/kernel-parameters.txt.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux